main
Ray
Publish 0.1.0
e7ea797
MAX3082EESA+
Analog Devices Inc./Maxim Integrated · RS-485 / RS-422 ICs · SOIC-8
MAX3082EESA+ from Analog Devices Inc./Maxim Integrated, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RO | output | Receiver output: with RE low, RO is high if A - B ≥ -50mV and low if A - B ≤ -200mV, and it is high impedance when RE is high. |
| 2 | RE | input | Receiver output enable: drive low to enable RO, high to make RO high impedance; RE high with DE low enters low-power shutdown. |
| 3 | DE | input | Driver output enable: drive high to enable the driver outputs, which are high impedance when DE is low; RE high with DE low enters low-power shutdown. |
| 4 | DI | input | Driver input: with DE high, a low on DI forces the noninverting output low and the inverting output high, and a high on DI does the opposite. |
| 5 | GND | power_in | Ground. |
| 6 | A | bidirectional | Noninverting receiver input and noninverting driver output (half-duplex bus pin, ±15kV HBM ESD protected). |
| 7 | B | bidirectional | Inverting receiver input and inverting driver output (half-duplex bus pin, ±15kV HBM ESD protected). |
| 8 | VCC | power_in | Positive supply, 4.75V ≤ VCC ≤ 5.25V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices Inc./Maxim Integrated |
| Package | SOIC-8 |
| Category | Interface |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Differential Driver Output (R=27Ω) | VOD2 | 1.5 | V | Figure 5, R = 27Ω (RS-485) | 2 | ||
| Differential Driver Output (R=50Ω) | VOD2 | 2 | V | Figure 5, R = 50Ω (RS-422) | 2 | ||
| Differential Driver Output (No Load) | VOD1 | 5 | V | Figure 5 | 2 | ||
| Change in Magnitude of Differential Output Voltage | ΔVOD | 0.2 | V | Figure 5, R = 50Ω or R = 27Ω | 2 | ||
| Driver Common-Mode Output Voltage | VOC | 3 | V | Figure 5, R = 50Ω or R = 27Ω | 2 | ||
| Change in Magnitude of Common-Mode Voltage | ΔVOC | 0.2 | V | Figure 5, R = 50Ω or R = 27Ω | 2 | ||
| Input High Voltage | VIH1 | 2 | V | DE, DI, RE | 2 | ||
| Input Low Voltage | VIL1 | 0.8 | V | DE, DI, RE | 2 | ||
| DI Input Hysteresis | VHYS | 100 | mV | 2 | |||
| Input Current (DE, DI, RE) | IIN1 | -2 | 2 | µA | DE, DI, RE | 2 | |
| Driver Short-Circuit Output Current | IOSD | -250 | 250 | mA | -7V ≤ VOUT ≤ VCC / 0V ≤ VOUT ≤ 12V (Note 4) | 2 | |
| Driver Short-Circuit Output Current (current limiting) | IOSD | -25 | 25 | mA | 0V ≤ VOUT ≤ VCC (Note 4) | 2 | |
| Input Current (A and B) | IIN4 | 125 | µA | DE = GND, VCC = GND or 5.25V, VIN = 12V | 2 | ||
| Input Current (A and B) | IIN4 | -100 | µA | DE = GND, VCC = GND or 5.25V, VIN = -7V | 2 | ||
| Receiver Output Low Voltage | VOL | 0.4 | V | IO = 4mA, VID = -200mV | 3 | ||
| Receiver Differential Threshold Voltage | VTH | -200 | -125 | -50 | mV | -7V ≤ VCM ≤ 12V | 3 |
| Receiver Input Hysteresis | ΔVTH | 25 | mV | 3 | |||
| Three-State Output Current at Receiver | IOZR | -1 | 1 | µA | 0.4V ≤ VO ≤ 2.4V | 3 | |
| Receiver Input Resistance | RIN | 96 | kΩ | -7V ≤ VCM ≤ 12V | 3 | ||
| Receiver Output Short-Circuit Current | IOSR | 7 | 95 | mA | 0V ≤ VRO ≤ VCC | 3 | |
| Supply Current, driver disabled | ICC | 375 | 600 | µA | No load, RE = DI = GND or VCC, DE = GND | 3 | |
| Supply Current, driver enabled | ICC | 420 | 800 | µA | No load, RE = DI = GND or VCC, DE = VCC | 3 | |
| ESD Protection for Y, Z, A, B | 15 | kV | Human Body Model | 3 | |||
| Driver Input-to-Output (low to high) | tDPLH | 500 | 2030 | 2600 | ns | Figures 7 and 9, RDIFF = 54Ω, CL1 = CL2 = 100pF | 4 |
| Driver Input-to-Output (high to low) | tDPHL | 500 | 2030 | 2600 | ns | Figures 7 and 9, RDIFF = 54Ω, CL1 = CL2 = 100pF | 4 |
| Driver Output Skew / tDPLH - tDPHL / | tDSKEW | -200 | -3 | 200 | ns | Figures 7 and 9, RDIFF = 54Ω, CL1 = CL2 = 100pF | 4 |
| Driver Rise or Fall Time | tDR, tDF | 667 | 1320 | 2500 | ns | Figures 7 and 9, RDIFF = 54Ω, CL1 = CL2 = 100pF | 4 |
| Maximum Data Rate | fMAX | 115 | kbps | 4 | |||
| Driver Enable to Output Low | tDZL | 3500 | ns | Figures 8 and 10, CL = 100pF, S1 closed | 4 | ||
| Driver Enable to Output High | tDZH | 3500 | ns | Figures 8 and 10, CL = 100pF, S2 closed | 4 | ||
| Driver Disable Time from Low | tDLZ | 100 | ns | Figures 8 and 10, CL = 15pF, S1 closed | 4 | ||
| Driver Disable Time from High | tDHZ | 100 | ns | Figures 8 and 10, CL = 15pF, S2 closed | 4 | ||
| Receiver Input to Output | tRPLH, tRPHL | 127 | 200 | ns | Figures 11 and 13; / VID / ≥ 2.0V; rise and fall time of VID ≤ 15ns | 4 | |
| Differential Receiver Skew / tRPLH - tRPHL / | tRSKD | 3 | 30 | ns | Figures 11 and 13; / VID / ≥ 2.0V; rise and fall time of VID ≤ 15ns | 4 | |
| Receiver Enable to Output Low | tRZL | 20 | 50 | ns | Figures 6 and 12, CL = 100pF, S1 closed | 4 | |
| Receiver Enable to Output High | tRZH | 20 | 50 | ns | Figures 6 and 12, CL = 100pF, S2 closed | 4 | |
| Receiver Disable Time from Low | tRLZ | 20 | 50 | ns | Figures 6 and 12, CL = 100pF, S1 closed | 4 | |
| Receiver Disable Time from High | tRHZ | 20 | 50 | ns | Figures 6 and 12, CL = 100pF, S2 closed | 4 | |
| Supply Voltage | VCC | 7 | V | 2 | |||
| Control Input Voltage | RE, DE | -0.3 | V | -0.3V to (VCC + 0.3V) | 2 | ||
| Driver Input Voltage | DI | -0.3 | V | -0.3V to (VCC + 0.3V) | 2 | ||
| Driver Output Voltage | A, B | -13 | 13 | V | 2 | ||
| Receiver Input Voltage | A, B | -13 | 13 | V | 2 | ||
| Receiver Output Voltage | RO | -0.3 | V | -0.3V to (VCC + 0.3V) | 2 | ||
| Operating Temperature Range (MAX3082EE) | -40 | 85 | °C | MAX308_EE_ _ | 2 | ||
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Lead Temperature | 300 | °C | soldering, 10s | 2 |
CAD (KiCad official)
- Symbol:
MAX3082EESA+ - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
max3082eesa-etched.step/max3082eesa-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);max3082eesa.step/max3082eesa.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices Inc./Maxim Integrated datasheet (20 pp, sha256
90c2a02156880f64, retrieved 2026-10-31, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MAX3082EESA+
**Analog Devices Inc./Maxim Integrated** · RS-485 / RS-422 ICs · SOIC-8
MAX3082EESA+ from Analog Devices Inc./Maxim Integrated, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RO | output | Receiver output: with RE low, RO is high if A - B ≥ -50mV and low if A - B ≤ -200mV, and it is high impedance when RE is high. |
| 2 | RE | input | Receiver output enable: drive low to enable RO, high to make RO high impedance; RE high with DE low enters low-power shutdown. |
| 3 | DE | input | Driver output enable: drive high to enable the driver outputs, which are high impedance when DE is low; RE high with DE low enters low-power shutdown. |
| 4 | DI | input | Driver input: with DE high, a low on DI forces the noninverting output low and the inverting output high, and a high on DI does the opposite. |
| 5 | GND | power_in | Ground. |
| 6 | A | bidirectional | Noninverting receiver input and noninverting driver output (half-duplex bus pin, ±15kV HBM ESD protected). |
| 7 | B | bidirectional | Inverting receiver input and inverting driver output (half-duplex bus pin, ±15kV HBM ESD protected). |
| 8 | VCC | power_in | Positive supply, 4.75V ≤ VCC ≤ 5.25V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices Inc./Maxim Integrated |
| Package | SOIC-8 |
| Category | Interface |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Differential Driver Output (R=27Ω) | VOD2 | 1.5 | | | V | Figure 5, R = 27Ω (RS-485) | 2 |
| Differential Driver Output (R=50Ω) | VOD2 | 2 | | | V | Figure 5, R = 50Ω (RS-422) | 2 |
| Differential Driver Output (No Load) | VOD1 | | | 5 | V | Figure 5 | 2 |
| Change in Magnitude of Differential Output Voltage | ΔVOD | | | 0.2 | V | Figure 5, R = 50Ω or R = 27Ω | 2 |
| Driver Common-Mode Output Voltage | VOC | | | 3 | V | Figure 5, R = 50Ω or R = 27Ω | 2 |
| Change in Magnitude of Common-Mode Voltage | ΔVOC | | | 0.2 | V | Figure 5, R = 50Ω or R = 27Ω | 2 |
| Input High Voltage | VIH1 | 2 | | | V | DE, DI, RE | 2 |
| Input Low Voltage | VIL1 | | | 0.8 | V | DE, DI, RE | 2 |
| DI Input Hysteresis | VHYS | | 100 | | mV | | 2 |
| Input Current (DE, DI, RE) | IIN1 | -2 | | 2 | µA | DE, DI, RE | 2 |
| Driver Short-Circuit Output Current | IOSD | -250 | | 250 | mA | -7V ≤ VOUT ≤ VCC / 0V ≤ VOUT ≤ 12V (Note 4) | 2 |
| Driver Short-Circuit Output Current (current limiting) | IOSD | -25 | | 25 | mA | 0V ≤ VOUT ≤ VCC (Note 4) | 2 |
| Input Current (A and B) | IIN4 | | | 125 | µA | DE = GND, VCC = GND or 5.25V, VIN = 12V | 2 |
| Input Current (A and B) | IIN4 | -100 | | | µA | DE = GND, VCC = GND or 5.25V, VIN = -7V | 2 |
| Receiver Output Low Voltage | VOL | | | 0.4 | V | IO = 4mA, VID = -200mV | 3 |
| Receiver Differential Threshold Voltage | VTH | -200 | -125 | -50 | mV | -7V ≤ VCM ≤ 12V | 3 |
| Receiver Input Hysteresis | ΔVTH | | 25 | | mV | | 3 |
| Three-State Output Current at Receiver | IOZR | -1 | | 1 | µA | 0.4V ≤ VO ≤ 2.4V | 3 |
| Receiver Input Resistance | RIN | 96 | | | kΩ | -7V ≤ VCM ≤ 12V | 3 |
| Receiver Output Short-Circuit Current | IOSR | 7 | | 95 | mA | 0V ≤ VRO ≤ VCC | 3 |
| Supply Current, driver disabled | ICC | | 375 | 600 | µA | No load, RE = DI = GND or VCC, DE = GND | 3 |
| Supply Current, driver enabled | ICC | | 420 | 800 | µA | No load, RE = DI = GND or VCC, DE = VCC | 3 |
| ESD Protection for Y, Z, A, B | | | 15 | | kV | Human Body Model | 3 |
| Driver Input-to-Output (low to high) | tDPLH | 500 | 2030 | 2600 | ns | Figures 7 and 9, RDIFF = 54Ω, CL1 = CL2 = 100pF | 4 |
| Driver Input-to-Output (high to low) | tDPHL | 500 | 2030 | 2600 | ns | Figures 7 and 9, RDIFF = 54Ω, CL1 = CL2 = 100pF | 4 |
| Driver Output Skew / tDPLH - tDPHL / | tDSKEW | -200 | -3 | 200 | ns | Figures 7 and 9, RDIFF = 54Ω, CL1 = CL2 = 100pF | 4 |
| Driver Rise or Fall Time | tDR, tDF | 667 | 1320 | 2500 | ns | Figures 7 and 9, RDIFF = 54Ω, CL1 = CL2 = 100pF | 4 |
| Maximum Data Rate | fMAX | 115 | | | kbps | | 4 |
| Driver Enable to Output Low | tDZL | | | 3500 | ns | Figures 8 and 10, CL = 100pF, S1 closed | 4 |
| Driver Enable to Output High | tDZH | | | 3500 | ns | Figures 8 and 10, CL = 100pF, S2 closed | 4 |
| Driver Disable Time from Low | tDLZ | | | 100 | ns | Figures 8 and 10, CL = 15pF, S1 closed | 4 |
| Driver Disable Time from High | tDHZ | | | 100 | ns | Figures 8 and 10, CL = 15pF, S2 closed | 4 |
| Receiver Input to Output | tRPLH, tRPHL | | 127 | 200 | ns | Figures 11 and 13; / VID / ≥ 2.0V; rise and fall time of VID ≤ 15ns | 4 |
| Differential Receiver Skew / tRPLH - tRPHL / | tRSKD | | 3 | 30 | ns | Figures 11 and 13; / VID / ≥ 2.0V; rise and fall time of VID ≤ 15ns | 4 |
| Receiver Enable to Output Low | tRZL | | 20 | 50 | ns | Figures 6 and 12, CL = 100pF, S1 closed | 4 |
| Receiver Enable to Output High | tRZH | | 20 | 50 | ns | Figures 6 and 12, CL = 100pF, S2 closed | 4 |
| Receiver Disable Time from Low | tRLZ | | 20 | 50 | ns | Figures 6 and 12, CL = 100pF, S1 closed | 4 |
| Receiver Disable Time from High | tRHZ | | 20 | 50 | ns | Figures 6 and 12, CL = 100pF, S2 closed | 4 |
| Supply Voltage | VCC | | | 7 | V | | 2 |
| Control Input Voltage | RE, DE | -0.3 | | | V | -0.3V to (VCC + 0.3V) | 2 |
| Driver Input Voltage | DI | -0.3 | | | V | -0.3V to (VCC + 0.3V) | 2 |
| Driver Output Voltage | A, B | -13 | | 13 | V | | 2 |
| Receiver Input Voltage | A, B | -13 | | 13 | V | | 2 |
| Receiver Output Voltage | RO | -0.3 | | | V | -0.3V to (VCC + 0.3V) | 2 |
| Operating Temperature Range (MAX3082EE) | | -40 | | 85 | °C | MAX308_EE_ _ | 2 |
| Storage Temperature Range | | -65 | | 150 | °C | | 2 |
| Lead Temperature | | | | 300 | °C | soldering, 10s | 2 |
## CAD (KiCad official)
- Symbol: `MAX3082EESA+`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files: `max3082eesa-etched.step` / `max3082eesa-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `max3082eesa.step` / `max3082eesa.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Analog Devices Inc./Maxim Integrated datasheet](https://www.analog.com/media/en/technical-documentation/data-sheets/max3080e-max3089e.pdf) (20 pp, sha256 `90c2a02156880f64`, retrieved 2026-10-31, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/max3082eesa-datasheet.pdf)