Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MAX3082EESA+

Analog Devices Inc./Maxim Integrated · RS-485 / RS-422 ICs · SOIC-8

MAX3082EESA+ from Analog Devices Inc./Maxim Integrated, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RO output Receiver output: with RE low, RO is high if A - B ≥ -50mV and low if A - B ≤ -200mV, and it is high impedance when RE is high.
2 RE input Receiver output enable: drive low to enable RO, high to make RO high impedance; RE high with DE low enters low-power shutdown.
3 DE input Driver output enable: drive high to enable the driver outputs, which are high impedance when DE is low; RE high with DE low enters low-power shutdown.
4 DI input Driver input: with DE high, a low on DI forces the noninverting output low and the inverting output high, and a high on DI does the opposite.
5 GND power_in Ground.
6 A bidirectional Noninverting receiver input and noninverting driver output (half-duplex bus pin, ±15kV HBM ESD protected).
7 B bidirectional Inverting receiver input and inverting driver output (half-duplex bus pin, ±15kV HBM ESD protected).
8 VCC power_in Positive supply, 4.75V ≤ VCC ≤ 5.25V.

Key specifications

Parameter Value
Manufacturer Analog Devices Inc./Maxim Integrated
Package SOIC-8
Category Interface
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Differential Driver Output (R=27Ω) VOD2 1.5 V Figure 5, R = 27Ω (RS-485) 2
Differential Driver Output (R=50Ω) VOD2 2 V Figure 5, R = 50Ω (RS-422) 2
Differential Driver Output (No Load) VOD1 5 V Figure 5 2
Change in Magnitude of Differential Output Voltage ΔVOD 0.2 V Figure 5, R = 50Ω or R = 27Ω 2
Driver Common-Mode Output Voltage VOC 3 V Figure 5, R = 50Ω or R = 27Ω 2
Change in Magnitude of Common-Mode Voltage ΔVOC 0.2 V Figure 5, R = 50Ω or R = 27Ω 2
Input High Voltage VIH1 2 V DE, DI, RE 2
Input Low Voltage VIL1 0.8 V DE, DI, RE 2
DI Input Hysteresis VHYS 100 mV 2
Input Current (DE, DI, RE) IIN1 -2 2 µA DE, DI, RE 2
Driver Short-Circuit Output Current IOSD -250 250 mA -7V ≤ VOUT ≤ VCC / 0V ≤ VOUT ≤ 12V (Note 4) 2
Driver Short-Circuit Output Current (current limiting) IOSD -25 25 mA 0V ≤ VOUT ≤ VCC (Note 4) 2
Input Current (A and B) IIN4 125 µA DE = GND, VCC = GND or 5.25V, VIN = 12V 2
Input Current (A and B) IIN4 -100 µA DE = GND, VCC = GND or 5.25V, VIN = -7V 2
Receiver Output Low Voltage VOL 0.4 V IO = 4mA, VID = -200mV 3
Receiver Differential Threshold Voltage VTH -200 -125 -50 mV -7V ≤ VCM ≤ 12V 3
Receiver Input Hysteresis ΔVTH 25 mV 3
Three-State Output Current at Receiver IOZR -1 1 µA 0.4V ≤ VO ≤ 2.4V 3
Receiver Input Resistance RIN 96 kΩ -7V ≤ VCM ≤ 12V 3
Receiver Output Short-Circuit Current IOSR 7 95 mA 0V ≤ VRO ≤ VCC 3
Supply Current, driver disabled ICC 375 600 µA No load, RE = DI = GND or VCC, DE = GND 3
Supply Current, driver enabled ICC 420 800 µA No load, RE = DI = GND or VCC, DE = VCC 3
ESD Protection for Y, Z, A, B 15 kV Human Body Model 3
Driver Input-to-Output (low to high) tDPLH 500 2030 2600 ns Figures 7 and 9, RDIFF = 54Ω, CL1 = CL2 = 100pF 4
Driver Input-to-Output (high to low) tDPHL 500 2030 2600 ns Figures 7 and 9, RDIFF = 54Ω, CL1 = CL2 = 100pF 4
Driver Output Skew / tDPLH - tDPHL / tDSKEW -200 -3 200 ns Figures 7 and 9, RDIFF = 54Ω, CL1 = CL2 = 100pF 4
Driver Rise or Fall Time tDR, tDF 667 1320 2500 ns Figures 7 and 9, RDIFF = 54Ω, CL1 = CL2 = 100pF 4
Maximum Data Rate fMAX 115 kbps 4
Driver Enable to Output Low tDZL 3500 ns Figures 8 and 10, CL = 100pF, S1 closed 4
Driver Enable to Output High tDZH 3500 ns Figures 8 and 10, CL = 100pF, S2 closed 4
Driver Disable Time from Low tDLZ 100 ns Figures 8 and 10, CL = 15pF, S1 closed 4
Driver Disable Time from High tDHZ 100 ns Figures 8 and 10, CL = 15pF, S2 closed 4
Receiver Input to Output tRPLH, tRPHL 127 200 ns Figures 11 and 13; / VID / ≥ 2.0V; rise and fall time of VID ≤ 15ns 4
Differential Receiver Skew / tRPLH - tRPHL / tRSKD 3 30 ns Figures 11 and 13; / VID / ≥ 2.0V; rise and fall time of VID ≤ 15ns 4
Receiver Enable to Output Low tRZL 20 50 ns Figures 6 and 12, CL = 100pF, S1 closed 4
Receiver Enable to Output High tRZH 20 50 ns Figures 6 and 12, CL = 100pF, S2 closed 4
Receiver Disable Time from Low tRLZ 20 50 ns Figures 6 and 12, CL = 100pF, S1 closed 4
Receiver Disable Time from High tRHZ 20 50 ns Figures 6 and 12, CL = 100pF, S2 closed 4
Supply Voltage VCC 7 V 2
Control Input Voltage RE, DE -0.3 V -0.3V to (VCC + 0.3V) 2
Driver Input Voltage DI -0.3 V -0.3V to (VCC + 0.3V) 2
Driver Output Voltage A, B -13 13 V 2
Receiver Input Voltage A, B -13 13 V 2
Receiver Output Voltage RO -0.3 V -0.3V to (VCC + 0.3V) 2
Operating Temperature Range (MAX3082EE) -40 85 °C MAX308_EE_ _ 2
Storage Temperature Range -65 150 °C 2
Lead Temperature 300 °C soldering, 10s 2

CAD (KiCad official)

  • Symbol: MAX3082EESA+
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: max3082eesa-etched.step / max3082eesa-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); max3082eesa.step / max3082eesa.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices Inc./Maxim Integrated datasheet (20 pp, sha256 90c2a02156880f64, retrieved 2026-10-31, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF