Generated by kicad-footprint-generator · KiCad file format 20260206
MAX232ESE-MS
MSKSEMI · RS232 ICs · SOP-16
MAX232ESE-MS from MSKSEMI, in a SOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | C1+ | passive | Positive terminal of the voltage-doubler charge-pump capacitor C1, typically 1 µF in the datasheet test and application circuits. |
| 2 | V+ | power_out | Voltage-doubler charge-pump output that the datasheet gives as about ±10 V unloaded, with an absolute maximum of VCC-0.3 to +14 V. |
| 3 | C1- | passive | Negative terminal of the voltage-doubler charge-pump capacitor C1. |
| 4 | C2+ | passive | Positive terminal of the inverting charge-pump capacitor C2, typically 1 µF in the datasheet test and application circuits. |
| 5 | C2- | passive | Negative terminal of the inverting charge-pump capacitor C2. |
| 6 | V- | power_out | Inverting charge-pump output that supplies the negative RS-232 driver rail, with an absolute range of +0.3 V to -14 V. |
| 7 | T2OUT | output | Second RS-232 driver output, with a swing of at least ±5.0 V into a 3 kΩ load to ground (typical ±7.3 V). |
| 8 | R2IN | input | Second RS-232 receiver input, rated ±30 V with an input impedance of 3 to 7 kΩ (typical 5 kΩ). |
| 9 | R2OUT | output | Second receiver CMOS/TTL logic output, with VOL of 0.4 V maximum at 3.2 mA and VOH of 3.5 V minimum at -1 mA. |
| 10 | T2IN | input | Second driver logic input compatible with TTL/CMOS levels, with a low threshold of 0.8 V maximum and a high threshold of 2 V minimum. |
| 11 | T1IN | input | First driver logic input compatible with TTL/CMOS levels, with a low threshold of 0.8 V maximum and a high threshold of 2 V minimum. |
| 12 | R1OUT | output | First receiver CMOS/TTL logic output, with VOL of 0.4 V maximum at 3.2 mA and VOH of 3.5 V minimum at -1 mA. |
| 13 | R1IN | input | First RS-232 receiver input, rated ±30 V with an input impedance of 3 to 7 kΩ (typical 5 kΩ). |
| 14 | T1OUT | output | First RS-232 driver output, with a swing of at least ±5.0 V into a 3 kΩ load to ground (typical ±7.3 V). |
| 15 | GND | power_in | Ground reference for all voltages on the device. |
| 16 | VCC | power_in | Single 5 V supply input (5 V ±10%), with an absolute maximum of -0.3 V to +6 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MSKSEMI |
| Package | SOP-16 |
| Category | Interface |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (VCC) | VCC | -0.3 | 6 | V | 4 | ||
| Charge-pump voltage pin V+ | V+ | 14 | V | 4 | |||
| Charge-pump voltage pin V- | V- | -14 | 0.3 | V | 4 | ||
| V+ + /V-/ | V+ + /V-/ | 13 | V | 4 | |||
| Transmitter input pins T1IN, T2IN | T1IN, T2IN | -0.3 | V | 4 | |||
| Receiver input pins R1IN, R2IN | R1IN, R2IN | -30 | 30 | V | 4 | ||
| Receiver output pins R1OUT, R2OUT | R1OUT, R2OUT | -0.3 | V | 4 | |||
| Operating temperature range | -40 | 85 | ℃ | 4 | |||
| Storage temperature range | -60 | 150 | ℃ | 4 | |||
| Soldering temperature | 300 | ℃ | 4 | ||||
| Continuous power dissipation, SOP16 | 696 | mW | 4 | ||||
| VCC supply tolerance | VCC | -10 | 10 | % | 2 | ||
| Logic control low level | VTTIN_L | 0.8 | V | T1IN, T2IN ports | 4 | ||
| Logic control high level | VTTIN_H | 2 | V | T1IN, T2IN ports | 4 | ||
| Receiver output low voltage | VROL | 0.4 | V | IOUT=3.2mA | 5 | ||
| Receiver output high voltage | VROH | 3.5 | V | IOUT=-1mA | 5 | ||
| Receiver input range | VRIN | -30 | 30 | V | 5 | ||
| Receiver input resistance | RRIN | 3 | 5 | 7 | kΩ | 5 | |
| Receiver input low threshold | VRIL | 0.8 | 1.1 | V | 5 | ||
| Receiver input high threshold | VRIH | 1.5 | 2.4 | V | 5 | ||
| Transmitter output swing | VTOUT | 5 | 7.3 | V | All transmitter outputs loaded 3kΩ to GND | 5 | |
| Transmitter short-circuit current | Itsc | 10 | 60 | mA | 5 | ||
| Supply current, no load | Isup | 5 | 10 | mA | 4 | ||
| Logic input current | ITIN | -10 | 1 | 10 | uA | T1IN, T2IN ports | 4 |
| Logic control hysteresis | 0.3 | V | T1IN, T2IN ports | 4 | |||
| Receiver input hysteresis | 0.4 | V | 5 | ||||
| Transmitter output impedance | RTOUT | 300 | Ω | VCC=0V, transmitter input=±2V | 5 | ||
| Data rate | 120 | kbps | RL=3kΩ, CL=1000pF | 6 | |||
| Receiver propagation delay high-to-low | tRPHL | 0.5 | 10 | us | CL=150pF | 6 | |
| Receiver propagation delay low-to-high | tRPLH | 0.5 | 10 | us | CL=150pF | 6 | |
| Transmitter slew rate | SR | 4 | V/us | RL=3kΩ |
6 | ||
| Supply voltage (recommended) | VCC | 5 | V | 2 |
CAD (KiCad official)
- Symbol:
MAX232ESE-MS - Footprint:
Package_SO:SOIC-16_3.9x9.9mm_P1.27mm - 3D model: SOP-16 (KiCad packages3D, STEP)
- 3D model files:
max232ese-ms-etched.step/max232ese-ms-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);max232ese-ms.step/max232ese-ms.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: MSKSEMI datasheet (12 pp, sha256
4a402851d56a3a2c, retrieved 2026-10-18, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).