Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MAX232ESE-MS

MSKSEMI · RS232 ICs · SOP-16

MAX232ESE-MS from MSKSEMI, in a SOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 C1+ passive Positive terminal of the voltage-doubler charge-pump capacitor C1, typically 1 µF in the datasheet test and application circuits.
2 V+ power_out Voltage-doubler charge-pump output that the datasheet gives as about ±10 V unloaded, with an absolute maximum of VCC-0.3 to +14 V.
3 C1- passive Negative terminal of the voltage-doubler charge-pump capacitor C1.
4 C2+ passive Positive terminal of the inverting charge-pump capacitor C2, typically 1 µF in the datasheet test and application circuits.
5 C2- passive Negative terminal of the inverting charge-pump capacitor C2.
6 V- power_out Inverting charge-pump output that supplies the negative RS-232 driver rail, with an absolute range of +0.3 V to -14 V.
7 T2OUT output Second RS-232 driver output, with a swing of at least ±5.0 V into a 3 kΩ load to ground (typical ±7.3 V).
8 R2IN input Second RS-232 receiver input, rated ±30 V with an input impedance of 3 to 7 kΩ (typical 5 kΩ).
9 R2OUT output Second receiver CMOS/TTL logic output, with VOL of 0.4 V maximum at 3.2 mA and VOH of 3.5 V minimum at -1 mA.
10 T2IN input Second driver logic input compatible with TTL/CMOS levels, with a low threshold of 0.8 V maximum and a high threshold of 2 V minimum.
11 T1IN input First driver logic input compatible with TTL/CMOS levels, with a low threshold of 0.8 V maximum and a high threshold of 2 V minimum.
12 R1OUT output First receiver CMOS/TTL logic output, with VOL of 0.4 V maximum at 3.2 mA and VOH of 3.5 V minimum at -1 mA.
13 R1IN input First RS-232 receiver input, rated ±30 V with an input impedance of 3 to 7 kΩ (typical 5 kΩ).
14 T1OUT output First RS-232 driver output, with a swing of at least ±5.0 V into a 3 kΩ load to ground (typical ±7.3 V).
15 GND power_in Ground reference for all voltages on the device.
16 VCC power_in Single 5 V supply input (5 V ±10%), with an absolute maximum of -0.3 V to +6 V.

Key specifications

Parameter Value
Manufacturer MSKSEMI
Package SOP-16
Category Interface
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage (VCC) VCC -0.3 6 V 4
Charge-pump voltage pin V+ V+ 14 V 4
Charge-pump voltage pin V- V- -14 0.3 V 4
V+ + /V-/ V+ + /V-/ 13 V 4
Transmitter input pins T1IN, T2IN T1IN, T2IN -0.3 V 4
Receiver input pins R1IN, R2IN R1IN, R2IN -30 30 V 4
Receiver output pins R1OUT, R2OUT R1OUT, R2OUT -0.3 V 4
Operating temperature range -40 85 ℃ 4
Storage temperature range -60 150 ℃ 4
Soldering temperature 300 ℃ 4
Continuous power dissipation, SOP16 696 mW 4
VCC supply tolerance VCC -10 10 % 2
Logic control low level VTTIN_L 0.8 V T1IN, T2IN ports 4
Logic control high level VTTIN_H 2 V T1IN, T2IN ports 4
Receiver output low voltage VROL 0.4 V IOUT=3.2mA 5
Receiver output high voltage VROH 3.5 V IOUT=-1mA 5
Receiver input range VRIN -30 30 V 5
Receiver input resistance RRIN 3 5 7 kΩ 5
Receiver input low threshold VRIL 0.8 1.1 V 5
Receiver input high threshold VRIH 1.5 2.4 V 5
Transmitter output swing VTOUT 5 7.3 V All transmitter outputs loaded 3kΩ to GND 5
Transmitter short-circuit current Itsc 10 60 mA 5
Supply current, no load Isup 5 10 mA 4
Logic input current ITIN -10 1 10 uA T1IN, T2IN ports 4
Logic control hysteresis 0.3 V T1IN, T2IN ports 4
Receiver input hysteresis 0.4 V 5
Transmitter output impedance RTOUT 300 Ω VCC=0V, transmitter input=±2V 5
Data rate 120 kbps RL=3kΩ, CL=1000pF 6
Receiver propagation delay high-to-low tRPHL 0.5 10 us CL=150pF 6
Receiver propagation delay low-to-high tRPLH 0.5 10 us CL=150pF 6
Transmitter slew rate SR 4 V/us RL=3kΩ7kΩ, CL=50pF1000pF, -3.0V3.0V or 3.0V-3.0V 6
Supply voltage (recommended) VCC 5 V 2

CAD (KiCad official)

  • Symbol: MAX232ESE-MS
  • Footprint: Package_SO:SOIC-16_3.9x9.9mm_P1.27mm
  • 3D model: SOP-16 (KiCad packages3D, STEP)
  • 3D model files: max232ese-ms-etched.step / max232ese-ms-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); max232ese-ms.step / max232ese-ms.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: MSKSEMI datasheet (12 pp, sha256 4a402851d56a3a2c, retrieved 2026-10-18, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF