Generated by kicad-footprint-generator · KiCad file format 20260206
MAX232EIDWR
Texas Instruments · Pre-ordered Chips · SOIC-16-300mil
MAX232EIDWR from Texas Instruments, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | C1+ | passive | Positive lead of the C1 charge-pump capacitor (1 µF external capacitor required). |
| 2 | VS+ | power_out | Positive charge-pump output for the storage capacitor only; absolute maximum is VCC - 0.3 V to 15 V. |
| 3 | C1- | passive | Negative lead of the C1 charge-pump capacitor (1 µF external capacitor required). |
| 4 | C2+ | passive | Positive lead of the C2 charge-pump capacitor (1 µF external capacitor required). |
| 5 | C2- | passive | Negative lead of the C2 charge-pump capacitor (1 µF external capacitor required). |
| 6 | VS- | power_out | Negative charge-pump output for the storage capacitor only; absolute maximum is -15 V to -0.3 V. |
| 7 | DOUT2 | output | RS-232 line data output to the remote RS-232 system; output range is VS- - 0.3 V to VS+ + 0.3 V and short-circuit duration is unlimited. |
| 8 | RIN2 | input | RS-232 line data input from the remote RS-232 system; receiver input range is ±30 V with a ±3 V decode threshold. |
| 9 | ROUT2 | output | Logic data output to the UART; output range is -0.3 V to VCC + 0.3 V. |
| 10 | DIN2 | input | Logic data input from the UART with an internal pullup; VIH minimum 2 V and VIL maximum 0.8 V. |
| 11 | DIN1 | input | Logic data input from the UART with an internal pullup; VIH minimum 2 V and VIL maximum 0.8 V. |
| 12 | ROUT1 | output | Logic data output to the UART; output range is -0.3 V to VCC + 0.3 V. |
| 13 | RIN1 | input | RS-232 line data input from the remote RS-232 system; receiver input range is ±30 V with a ±3 V decode threshold. |
| 14 | DOUT1 | output | RS-232 line data output to the remote RS-232 system; output range is VS- - 0.3 V to VS+ + 0.3 V and short-circuit duration is unlimited. |
| 15 | GND | power_in | Ground reference for the device; all voltages are referenced to network GND. |
| 16 | VCC | power_in | Supply voltage, 4.5 V to 5.5 V (5 V nominal), connected to the external 5 V supply. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-16-300mil |
| Category | Interface ICs |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input supply voltage | VCC | -0.3 | 6 | V | 4 | ||
| Positive output supply voltage | VS+ | 15 | V | 4 | |||
| Negative output supply voltage | VS- | -15 | -0.3 | V | 4 | ||
| Input voltage, driver | VI | -0.3 | V | Driver | 4 | ||
| Input voltage, receiver | VI | -30 | 30 | V | Receiver | 4 | |
| Output voltage, ROUT | VO | -0.3 | V | ROUT | 4 | ||
| Operating virtual junction temperature | TJ | 150 | °C | 4 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Supply voltage | VCC | 4.5 | 5 | 5.5 | V | 4 | |
| High-level input voltage | VIH | 2 | V | DIN1, DIN2 | 4 | ||
| Low-level input voltage | VIL | 0.8 | V | DIN1, DIN2 | 4 | ||
| Receiver input voltage (RIN1, RIN2) | -3 | 30 | V | 4 | |||
| Operating free-air temperature, MAX232EI | TA | -40 | 85 | °C | MAX232EI | 4 | |
| Junction-to-ambient thermal resistance | RθJA | 73.4 | °C/W | DW (SOIC) 16-pin column | 5 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 35.1 | °C/W | DW (SOIC) 16-pin column | 5 | ||
| Junction-to-board thermal resistance | RθJB | 38.3 | °C/W | DW (SOIC) 16-pin column | 5 | ||
| Junction-to-top characterization parameter | ψJT | 9.4 | °C/W | DW (SOIC) 16-pin column | 5 | ||
| Junction-to-board characterization parameter | ψJB | 37.7 | °C/W | DW (SOIC) 16-pin column | 5 | ||
| Supply current | ICC | 8 | 10 | mA | VCC = 5.5 V; all outputs open, TA = 25°C | 5 | |
| High-level output voltage (driver) | VOH | 5 | 7 | V | DOUT, RL = 3 kΩ to GND | 5 | |
| Low-level output voltage (driver) | VOL | -7 | -5 | V | DOUT, RL = 3 kΩ to GND | 5 | |
| Output resistance | ro | 300 | Ω | DOUT, VS+ = VS- = 0, VO = ±2 V | 5 | ||
| Short-circuit output current | IOS | -10 | 10 | mA | DOUT, VCC = 5.5 V, VO = 0 | 5 | |
| Short-circuit input current | IIS | 200 | µA | DIN, VI = 0 | 5 | ||
| High-level output voltage (receiver) | VOH | 3.5 | V | ROUT, IOH = -1mA | 5 | ||
| Low-level output voltage (receiver) | VOL | 0.4 | V | ROUT, IOL = 3.2mA | 5 | ||
| Receiver positive-going input threshold voltage | VIT+ | 1.7 | 2.4 | V | RIN, VCC = 5V, TA = 25°C | 5 | |
| Receiver negative-going input threshold voltage | VIT- | 0.8 | 1.2 | V | RIN, VCC = 5V, TA = 25°C | 5 | |
| Input hysteresis voltage | Vhys | 0.2 | 0.5 | 1 | V | RIN, VCC = 5V | 5 |
| Receiver input resistance | ri | 3 | 5 | 7 | kΩ | RIN, VCC = 5V, TA = 25°C | 5 |
| Driver slew rate | SR | 30 | V/µs | RL = 3kΩ to 7kΩ, See Figure 6-2 | 6 | ||
| Driver transition region slew rate | SR(t) | 3 | V/µs | RL = 3kΩ, CL = 2.5nF, See Figure 6-3 | 6 | ||
| Data rate | 250 | kbit/s | One DOUT switching | 6 | |||
| Receiver propagation delay time, low- to high-level output | tPLH(R) | 500 | ns | CL = 50pF | 6 | ||
| Receiver propagation delay time, high- to low-level output | tPHL(R) | 500 | ns | CL = 50pF | 6 |
CAD (KiCad official)
- Symbol:
MAX232EIDWR - Footprint:
Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm - 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
- 3D model files:
max232eidwr-etched.step/max232eidwr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);max232eidwr.step/max232eidwr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (30 pp, sha256
97cf408e74944a1e, retrieved 2026-11-11, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).