Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MAX232EIDWR

Texas Instruments · Pre-ordered Chips · SOIC-16-300mil

MAX232EIDWR from Texas Instruments, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 C1+ passive Positive lead of the C1 charge-pump capacitor (1 µF external capacitor required).
2 VS+ power_out Positive charge-pump output for the storage capacitor only; absolute maximum is VCC - 0.3 V to 15 V.
3 C1- passive Negative lead of the C1 charge-pump capacitor (1 µF external capacitor required).
4 C2+ passive Positive lead of the C2 charge-pump capacitor (1 µF external capacitor required).
5 C2- passive Negative lead of the C2 charge-pump capacitor (1 µF external capacitor required).
6 VS- power_out Negative charge-pump output for the storage capacitor only; absolute maximum is -15 V to -0.3 V.
7 DOUT2 output RS-232 line data output to the remote RS-232 system; output range is VS- - 0.3 V to VS+ + 0.3 V and short-circuit duration is unlimited.
8 RIN2 input RS-232 line data input from the remote RS-232 system; receiver input range is ±30 V with a ±3 V decode threshold.
9 ROUT2 output Logic data output to the UART; output range is -0.3 V to VCC + 0.3 V.
10 DIN2 input Logic data input from the UART with an internal pullup; VIH minimum 2 V and VIL maximum 0.8 V.
11 DIN1 input Logic data input from the UART with an internal pullup; VIH minimum 2 V and VIL maximum 0.8 V.
12 ROUT1 output Logic data output to the UART; output range is -0.3 V to VCC + 0.3 V.
13 RIN1 input RS-232 line data input from the remote RS-232 system; receiver input range is ±30 V with a ±3 V decode threshold.
14 DOUT1 output RS-232 line data output to the remote RS-232 system; output range is VS- - 0.3 V to VS+ + 0.3 V and short-circuit duration is unlimited.
15 GND power_in Ground reference for the device; all voltages are referenced to network GND.
16 VCC power_in Supply voltage, 4.5 V to 5.5 V (5 V nominal), connected to the external 5 V supply.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-16-300mil
Category Interface ICs
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input supply voltage VCC -0.3 6 V 4
Positive output supply voltage VS+ 15 V 4
Negative output supply voltage VS- -15 -0.3 V 4
Input voltage, driver VI -0.3 V Driver 4
Input voltage, receiver VI -30 30 V Receiver 4
Output voltage, ROUT VO -0.3 V ROUT 4
Operating virtual junction temperature TJ 150 °C 4
Storage temperature Tstg -65 150 °C 4
Supply voltage VCC 4.5 5 5.5 V 4
High-level input voltage VIH 2 V DIN1, DIN2 4
Low-level input voltage VIL 0.8 V DIN1, DIN2 4
Receiver input voltage (RIN1, RIN2) -3 30 V 4
Operating free-air temperature, MAX232EI TA -40 85 °C MAX232EI 4
Junction-to-ambient thermal resistance RθJA 73.4 °C/W DW (SOIC) 16-pin column 5
Junction-to-case (top) thermal resistance RθJC(top) 35.1 °C/W DW (SOIC) 16-pin column 5
Junction-to-board thermal resistance RθJB 38.3 °C/W DW (SOIC) 16-pin column 5
Junction-to-top characterization parameter ψJT 9.4 °C/W DW (SOIC) 16-pin column 5
Junction-to-board characterization parameter ψJB 37.7 °C/W DW (SOIC) 16-pin column 5
Supply current ICC 8 10 mA VCC = 5.5 V; all outputs open, TA = 25°C 5
High-level output voltage (driver) VOH 5 7 V DOUT, RL = 3 kΩ to GND 5
Low-level output voltage (driver) VOL -7 -5 V DOUT, RL = 3 kΩ to GND 5
Output resistance ro 300 Ω DOUT, VS+ = VS- = 0, VO = ±2 V 5
Short-circuit output current IOS -10 10 mA DOUT, VCC = 5.5 V, VO = 0 5
Short-circuit input current IIS 200 µA DIN, VI = 0 5
High-level output voltage (receiver) VOH 3.5 V ROUT, IOH = -1mA 5
Low-level output voltage (receiver) VOL 0.4 V ROUT, IOL = 3.2mA 5
Receiver positive-going input threshold voltage VIT+ 1.7 2.4 V RIN, VCC = 5V, TA = 25°C 5
Receiver negative-going input threshold voltage VIT- 0.8 1.2 V RIN, VCC = 5V, TA = 25°C 5
Input hysteresis voltage Vhys 0.2 0.5 1 V RIN, VCC = 5V 5
Receiver input resistance ri 3 5 7 kΩ RIN, VCC = 5V, TA = 25°C 5
Driver slew rate SR 30 V/µs RL = 3kΩ to 7kΩ, See Figure 6-2 6
Driver transition region slew rate SR(t) 3 V/µs RL = 3kΩ, CL = 2.5nF, See Figure 6-3 6
Data rate 250 kbit/s One DOUT switching 6
Receiver propagation delay time, low- to high-level output tPLH(R) 500 ns CL = 50pF 6
Receiver propagation delay time, high- to low-level output tPHL(R) 500 ns CL = 50pF 6

CAD (KiCad official)

  • Symbol: MAX232EIDWR
  • Footprint: Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm
  • 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
  • 3D model files: max232eidwr-etched.step / max232eidwr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); max232eidwr.step / max232eidwr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (30 pp, sha256 97cf408e74944a1e, retrieved 2026-11-11, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF