main
Ray
Publish 0.1.0
03bb55b
MAX232EESE+T
Analog Devices Inc Maxim Integrated · RS232 ICs · SOIC-16
MAX232EESE+T from Analog Devices Inc Maxim Integrated, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | C1+ | passive | Positive terminal of the first charge-pump capacitor (1µF for MAX232E, per the Electrical Characteristics note). |
| 2 | V+ | power_out | +2VCC voltage generated by the charge pump; V+ is pulled down to VCC in shutdown on the devices that have shutdown. |
| 3 | C1- | passive | Negative terminal of the first charge-pump capacitor (1µF for MAX232E). |
| 4 | C2+ | passive | Positive terminal of the second (inverting) charge-pump capacitor (1µF for MAX232E). |
| 5 | C2- | passive | Negative terminal of the second (inverting) charge-pump capacitor (1µF for MAX232E). |
| 6 | V- | power_out | -2VCC voltage generated by the charge pump, used for the RS-232 driver negative rail. |
| 7 | T2OUT | output | RS-232 driver 2 output; typical swing is ±8V with a 5kΩ receiver and meets EIA/TIA-232E ±5V minimum at 3kΩ load. |
| 8 | R2IN | input | RS-232 receiver 2 input; absolute maximum input voltage is ±30V, with about 5kΩ input resistance to ground and 0.5V hysteresis. |
| 9 | R2OUT | output | TTL/CMOS receiver 2 output; receiver outputs are referenced to VCC. |
| 10 | T2IN | input | TTL/CMOS driver 2 input; the MAX232E has no internal pullup on transmitter inputs. |
| 11 | T1IN | input | TTL/CMOS driver 1 input; the MAX232E has no internal pullup on transmitter inputs. |
| 12 | R1OUT | output | TTL/CMOS receiver 1 output; receiver outputs are referenced to VCC. |
| 13 | R1IN | input | RS-232 receiver 1 input; absolute maximum input voltage is ±30V, with about 5kΩ input resistance to ground and 0.5V hysteresis. |
| 14 | T1OUT | output | RS-232 driver 1 output; typical swing is ±8V with a 5kΩ receiver and meets EIA/TIA-232E ±5V minimum at 3kΩ load. |
| 15 | GND | power_in | Ground reference for the device. |
| 16 | VCC | power_in | +4.5V to +5.5V supply voltage input; bypass to ground with at least 0.1µF. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices Inc Maxim Integrated |
| Package | SOIC-16 |
| Category | Interface |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output-Voltage High (VOH, R_OUT) | VOH | 3.5 | V | R_OUT; IOUT = -1.0mA. Printed max is VCC - 0.4 V (not numeric in this table) | 2 | ||
| Output-Voltage Low (VOL, R_OUT) | VOL | 0.4 | V | R_OUT; IOUT = 3.2mA (MAX202E/203E/232E) | 2 | ||
| Input Threshold Low (T_IN) | VIL | 0.8 | V | T_IN | 2 | ||
| Input Threshold High (T_IN) | VIH | 2 | V | T_IN | 2 | ||
| Input Leakage Current | IIN | -10 | 10 | µA | T_IN = 0V to VCC (MAX202E/203E/232E); printed ±10 | 2 | |
| VCC Supply Current | ICC | 5 | 10 | mA | 2 | ||
| Output Resistance | ROUT | 300 | Ω | VCC = V+ = V- = 0V, VOUT = ±2V | 3 | ||
| Input Voltage Range | VIN | -30 | 30 | V | 3 | ||
| Input Hysteresis | VHYS | 0.2 | 0.5 | 1 | V | 3 | |
| Receiver Input Threshold Low | 0.8 | 1.2 | V | All parts, normal operation | 3 | ||
| Receiver Input Threshold High | 1.7 | 2.4 | V | All parts, normal operation | 3 | ||
| Maximum Data Rate | 120 | kbps | All drivers loaded with 3kΩ to ground (Note 1) | 3 | |||
| Transition-Region Slew Rate | 3 | 6 | 30 | V/µs | TA = +25°C, VCC = 5V, RL = 3kΩ to 7kΩ, CL = 50pF to 1000pF, measured from -3V to +3V or +3V to -3V, Figure 3 | 3 | |
| ESD Protection Voltage, Human Body Model | -15 | 15 | kV | Human Body Model | 3 | ||
| ESD Protection Voltage, IEC1000-4-2 Air-Gap Discharge | -15 | 15 | kV | IEC1000-4-2, Air-Gap Discharge | 3 | ||
| ESD Protection Voltage, IEC1000-4-2 Contact Discharge | -8 | 8 | kV | IEC1000-4-2, Contact Discharge | 3 | ||
| Absolute Max VCC | VCC | -0.3 | 6 | V | 2 | ||
| Absolute Max V+ | V+ | 14 | V | Printed min is (VCC - 0.3V), not numeric | 2 | ||
| Absolute Max V- | V- | -14 | 0.3 | V | 2 | ||
| Absolute Max R_IN input voltage | VRIN | -30 | 30 | V | 2 | ||
| Storage Temperature Range | TSTG | -65 | 165 | °C | 2 | ||
| Lead Temperature | TLEAD | 300 | °C | soldering, 10s | 2 | ||
| Supply Voltage VCC | VCC | 4.5 | 5.5 | V | MAX232E, VCC = +5V ±10% | 6 | |
| Operating Temperature Range (EE suffix) | TA | -40 | 85 | °C | MAX2_ EE _ (MAX232EESE) | 2 | |
| Charge-Pump Capacitors C1-C4 | C1-C4 | 1 | µF | MAX232E/241E; capacitors up to 10µF may be used | 3 |
CAD (KiCad official)
- Symbol:
MAX232EESE+T - Footprint:
Package_SO:SOIC-16_3.9x9.9mm_P1.27mm - 3D model: SOIC-16 (KiCad packages3D, STEP)
- 3D model files:
max232eese-t-etched.step/max232eese-t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);max232eese-t.step/max232eese-t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices Inc Maxim Integrated datasheet (25 pp, sha256
a4e54094adb94513, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MAX232EESE+T
**Analog Devices Inc Maxim Integrated** · RS232 ICs · SOIC-16
MAX232EESE+T from Analog Devices Inc Maxim Integrated, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | C1+ | passive | Positive terminal of the first charge-pump capacitor (1µF for MAX232E, per the Electrical Characteristics note). |
| 2 | V+ | power_out | +2VCC voltage generated by the charge pump; V+ is pulled down to VCC in shutdown on the devices that have shutdown. |
| 3 | C1- | passive | Negative terminal of the first charge-pump capacitor (1µF for MAX232E). |
| 4 | C2+ | passive | Positive terminal of the second (inverting) charge-pump capacitor (1µF for MAX232E). |
| 5 | C2- | passive | Negative terminal of the second (inverting) charge-pump capacitor (1µF for MAX232E). |
| 6 | V- | power_out | -2VCC voltage generated by the charge pump, used for the RS-232 driver negative rail. |
| 7 | T2OUT | output | RS-232 driver 2 output; typical swing is ±8V with a 5kΩ receiver and meets EIA/TIA-232E ±5V minimum at 3kΩ load. |
| 8 | R2IN | input | RS-232 receiver 2 input; absolute maximum input voltage is ±30V, with about 5kΩ input resistance to ground and 0.5V hysteresis. |
| 9 | R2OUT | output | TTL/CMOS receiver 2 output; receiver outputs are referenced to VCC. |
| 10 | T2IN | input | TTL/CMOS driver 2 input; the MAX232E has no internal pullup on transmitter inputs. |
| 11 | T1IN | input | TTL/CMOS driver 1 input; the MAX232E has no internal pullup on transmitter inputs. |
| 12 | R1OUT | output | TTL/CMOS receiver 1 output; receiver outputs are referenced to VCC. |
| 13 | R1IN | input | RS-232 receiver 1 input; absolute maximum input voltage is ±30V, with about 5kΩ input resistance to ground and 0.5V hysteresis. |
| 14 | T1OUT | output | RS-232 driver 1 output; typical swing is ±8V with a 5kΩ receiver and meets EIA/TIA-232E ±5V minimum at 3kΩ load. |
| 15 | GND | power_in | Ground reference for the device. |
| 16 | VCC | power_in | +4.5V to +5.5V supply voltage input; bypass to ground with at least 0.1µF. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices Inc Maxim Integrated |
| Package | SOIC-16 |
| Category | Interface |
| Pins | 16 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output-Voltage High (VOH, R_OUT) | VOH | 3.5 | | | V | R_OUT; IOUT = -1.0mA. Printed max is VCC - 0.4 V (not numeric in this table) | 2 |
| Output-Voltage Low (VOL, R_OUT) | VOL | | | 0.4 | V | R_OUT; IOUT = 3.2mA (MAX202E/203E/232E) | 2 |
| Input Threshold Low (T_IN) | VIL | | | 0.8 | V | T_IN | 2 |
| Input Threshold High (T_IN) | VIH | 2 | | | V | T_IN | 2 |
| Input Leakage Current | IIN | -10 | | 10 | µA | T_IN = 0V to VCC (MAX202E/203E/232E); printed ±10 | 2 |
| VCC Supply Current | ICC | | 5 | 10 | mA | | 2 |
| Output Resistance | ROUT | 300 | | | Ω | VCC = V+ = V- = 0V, VOUT = ±2V | 3 |
| Input Voltage Range | VIN | -30 | | 30 | V | | 3 |
| Input Hysteresis | VHYS | 0.2 | 0.5 | 1 | V | | 3 |
| Receiver Input Threshold Low | | 0.8 | 1.2 | | V | All parts, normal operation | 3 |
| Receiver Input Threshold High | | 1.7 | 2.4 | | V | All parts, normal operation | 3 |
| Maximum Data Rate | | 120 | | | kbps | All drivers loaded with 3kΩ to ground (Note 1) | 3 |
| Transition-Region Slew Rate | | 3 | 6 | 30 | V/µs | TA = +25°C, VCC = 5V, RL = 3kΩ to 7kΩ, CL = 50pF to 1000pF, measured from -3V to +3V or +3V to -3V, Figure 3 | 3 |
| ESD Protection Voltage, Human Body Model | | -15 | | 15 | kV | Human Body Model | 3 |
| ESD Protection Voltage, IEC1000-4-2 Air-Gap Discharge | | -15 | | 15 | kV | IEC1000-4-2, Air-Gap Discharge | 3 |
| ESD Protection Voltage, IEC1000-4-2 Contact Discharge | | -8 | | 8 | kV | IEC1000-4-2, Contact Discharge | 3 |
| Absolute Max VCC | VCC | -0.3 | | 6 | V | | 2 |
| Absolute Max V+ | V+ | | | 14 | V | Printed min is (VCC - 0.3V), not numeric | 2 |
| Absolute Max V- | V- | -14 | | 0.3 | V | | 2 |
| Absolute Max R_IN input voltage | VRIN | -30 | | 30 | V | | 2 |
| Storage Temperature Range | TSTG | -65 | | 165 | °C | | 2 |
| Lead Temperature | TLEAD | | | 300 | °C | soldering, 10s | 2 |
| Supply Voltage VCC | VCC | 4.5 | | 5.5 | V | MAX232E, VCC = +5V ±10% | 6 |
| Operating Temperature Range (EE suffix) | TA | -40 | | 85 | °C | MAX2_ _EE_ _ (MAX232EESE) | 2 |
| Charge-Pump Capacitors C1-C4 | C1-C4 | | 1 | | µF | MAX232E/241E; capacitors up to 10µF may be used | 3 |
## CAD (KiCad official)
- Symbol: `MAX232EESE+T`
- Footprint: `Package_SO:SOIC-16_3.9x9.9mm_P1.27mm`
- 3D model: SOIC-16 (KiCad packages3D, STEP)
- 3D model files: `max232eese-t-etched.step` / `max232eese-t-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `max232eese-t.step` / `max232eese-t.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Analog Devices Inc Maxim Integrated datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586193967445135360) (25 pp, sha256 `a4e54094adb94513`, retrieved 2026-10-18, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/max232eese-t-datasheet.pdf)