main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers max232eese-t: viewers · Ray
max232eese-t-etched.glb Publish 0.1.0 · Ray
max232eese-t-etched.step max232eese-t: factory component page (tier=lcsc) · Ray
max232eese-t-hero.glb max232eese-t: hero GLB from the etched model (keeps the MPN mark) · Ray
max232eese-t-hero.overlay.json Publish 0.1.0 · Ray
max232eese-t.glb Publish 0.1.0 · Ray
max232eese-t.kicad_mod Publish 0.1.0 · Ray
max232eese-t.kicad_sym Publish 0.1.0 · Ray
max232eese-t.lbr Publish 0.1.0 · Ray
max232eese-t.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray

MAX232EESE+T

Analog Devices Inc Maxim Integrated · RS232 ICs · SOIC-16

MAX232EESE+T from Analog Devices Inc Maxim Integrated, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 C1+ passive Positive terminal of the first charge-pump capacitor (1µF for MAX232E, per the Electrical Characteristics note).
2 V+ power_out +2VCC voltage generated by the charge pump; V+ is pulled down to VCC in shutdown on the devices that have shutdown.
3 C1- passive Negative terminal of the first charge-pump capacitor (1µF for MAX232E).
4 C2+ passive Positive terminal of the second (inverting) charge-pump capacitor (1µF for MAX232E).
5 C2- passive Negative terminal of the second (inverting) charge-pump capacitor (1µF for MAX232E).
6 V- power_out -2VCC voltage generated by the charge pump, used for the RS-232 driver negative rail.
7 T2OUT output RS-232 driver 2 output; typical swing is ±8V with a 5kΩ receiver and meets EIA/TIA-232E ±5V minimum at 3kΩ load.
8 R2IN input RS-232 receiver 2 input; absolute maximum input voltage is ±30V, with about 5kΩ input resistance to ground and 0.5V hysteresis.
9 R2OUT output TTL/CMOS receiver 2 output; receiver outputs are referenced to VCC.
10 T2IN input TTL/CMOS driver 2 input; the MAX232E has no internal pullup on transmitter inputs.
11 T1IN input TTL/CMOS driver 1 input; the MAX232E has no internal pullup on transmitter inputs.
12 R1OUT output TTL/CMOS receiver 1 output; receiver outputs are referenced to VCC.
13 R1IN input RS-232 receiver 1 input; absolute maximum input voltage is ±30V, with about 5kΩ input resistance to ground and 0.5V hysteresis.
14 T1OUT output RS-232 driver 1 output; typical swing is ±8V with a 5kΩ receiver and meets EIA/TIA-232E ±5V minimum at 3kΩ load.
15 GND power_in Ground reference for the device.
16 VCC power_in +4.5V to +5.5V supply voltage input; bypass to ground with at least 0.1µF.

Key specifications

Parameter Value
Manufacturer Analog Devices Inc Maxim Integrated
Package SOIC-16
Category Interface
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output-Voltage High (VOH, R_OUT) VOH 3.5 V R_OUT; IOUT = -1.0mA. Printed max is VCC - 0.4 V (not numeric in this table) 2
Output-Voltage Low (VOL, R_OUT) VOL 0.4 V R_OUT; IOUT = 3.2mA (MAX202E/203E/232E) 2
Input Threshold Low (T_IN) VIL 0.8 V T_IN 2
Input Threshold High (T_IN) VIH 2 V T_IN 2
Input Leakage Current IIN -10 10 µA T_IN = 0V to VCC (MAX202E/203E/232E); printed ±10 2
VCC Supply Current ICC 5 10 mA 2
Output Resistance ROUT 300 Ω VCC = V+ = V- = 0V, VOUT = ±2V 3
Input Voltage Range VIN -30 30 V 3
Input Hysteresis VHYS 0.2 0.5 1 V 3
Receiver Input Threshold Low 0.8 1.2 V All parts, normal operation 3
Receiver Input Threshold High 1.7 2.4 V All parts, normal operation 3
Maximum Data Rate 120 kbps All drivers loaded with 3kΩ to ground (Note 1) 3
Transition-Region Slew Rate 3 6 30 V/µs TA = +25°C, VCC = 5V, RL = 3kΩ to 7kΩ, CL = 50pF to 1000pF, measured from -3V to +3V or +3V to -3V, Figure 3 3
ESD Protection Voltage, Human Body Model -15 15 kV Human Body Model 3
ESD Protection Voltage, IEC1000-4-2 Air-Gap Discharge -15 15 kV IEC1000-4-2, Air-Gap Discharge 3
ESD Protection Voltage, IEC1000-4-2 Contact Discharge -8 8 kV IEC1000-4-2, Contact Discharge 3
Absolute Max VCC VCC -0.3 6 V 2
Absolute Max V+ V+ 14 V Printed min is (VCC - 0.3V), not numeric 2
Absolute Max V- V- -14 0.3 V 2
Absolute Max R_IN input voltage VRIN -30 30 V 2
Storage Temperature Range TSTG -65 165 °C 2
Lead Temperature TLEAD 300 °C soldering, 10s 2
Supply Voltage VCC VCC 4.5 5.5 V MAX232E, VCC = +5V ±10% 6
Operating Temperature Range (EE suffix) TA -40 85 °C MAX2_ EE _ (MAX232EESE) 2
Charge-Pump Capacitors C1-C4 C1-C4 1 µF MAX232E/241E; capacitors up to 10µF may be used 3

CAD (KiCad official)

  • Symbol: MAX232EESE+T
  • Footprint: Package_SO:SOIC-16_3.9x9.9mm_P1.27mm
  • 3D model: SOIC-16 (KiCad packages3D, STEP)
  • 3D model files: max232eese-t-etched.step / max232eese-t-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); max232eese-t.step / max232eese-t.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices Inc Maxim Integrated datasheet (25 pp, sha256 a4e54094adb94513, retrieved 2026-10-18, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF