Generated by kicad-footprint-generator · KiCad file format 20260206
MAX202IDWR
Texas Instruments · Communication Interface Chip/UART/485/232 · SOIC-16-300mil
MAX202IDWR from Texas Instruments, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | C1+ | passive | Positive lead of C1 capacitor; 0.1 µF external capacitor required between C1+ and C1-. |
| 2 | V+ | power_out | Positive charge pump output for storage capacitor only; V+ is generated from VCC, and the datasheet recommends a 0.1 µF storage capacitor with capacitors up to 10 µF usable. |
| 3 | C1- | passive | Negative lead of C1 capacitor; 0.1 µF external capacitor required between C1+ and C1-. |
| 4 | C2+ | passive | Positive lead of C2 capacitor; 0.1 µF external capacitor required between C2+ and C2-. |
| 5 | C2- | passive | Negative lead of C2 capacitor; 0.1 µF external capacitor required between C2+ and C2-. |
| 6 | V- | power_out | Negative charge pump output for storage capacitor only; V- is generated by the charge pump and is limited to -14 V minimum in absolute maximum ratings. |
| 7 | DOUT2 | output | RS-232 line data output (to remote RS-232 system); outputs are protected against shorts to ground and rated ±15 kV HBM ESD. |
| 8 | RIN2 | input | RS-232 line data input (from remote RS-232 system); accepts up to ±30 V with input thresholds decoding down to ±3 V. |
| 9 | ROUT2 | output | Logic data output (to UART); an open RIN2 input results in a high output on ROUT2. |
| 10 | DIN2 | input | Logic data input (from UART); the driver input has no internal pullup and must not be left floating. |
| 11 | DIN1 | input | Logic data input (from UART); the driver input has no internal pullup and must not be left floating. |
| 12 | ROUT1 | output | Logic data output (to UART); an open RIN1 input results in a high output on ROUT1. |
| 13 | RIN1 | input | RS-232 line data input (from remote RS-232 system); accepts up to ±30 V with input thresholds decoding down to ±3 V. |
| 14 | DOUT1 | output | RS-232 line data output (to remote RS-232 system); outputs are protected against shorts to ground and rated ±15 kV HBM ESD. |
| 15 | GND | power_in | Ground; the datasheet asks for a low-impedance connection from this pin to the board ground plane for best ESD performance. |
| 16 | VCC | power_in | Supply voltage, connect to external 5 V power supply; VCC must be between 4.5 V and 5.5 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-16-300mil |
| Category | Communication Interface Chip/UART/485/232 |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | 4.5 | 5 | 5.5 | V | 4 | |
| Driver high-level input voltage (DIN) | VIH | 2 | V | 4 | |||
| Driver low-level input voltage (DIN) | VIL | 0.8 | V | 4 | |||
| Driver input voltage (DIN) | VI | 0 | 5.5 | V | 4 | ||
| Receiver input voltage | -30 | 30 | V | 4 | |||
| Operating free-air temperature | TA | -40 | 85 | °C | MAX202I | 4 | |
| Supply voltage | VCC | -0.3 | 6 | V | 4 | ||
| Positive charge pump voltage | V+ | 14 | V | 4 | |||
| Negative charge pump voltage | V- | -14 | 0.3 | V | 4 | ||
| Input voltage, drivers | VI | -0.3 | V | 4 | |||
| Input voltage, receivers | VI | -30 | 30 | V | 4 | ||
| Output voltage, receivers | VO | -0.3 | V | 4 | |||
| Operating junction temperature | TJ | 150 | °C | 4 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Supply current | ICC | 8 | 15 | mA | No load, VCC = 5V | 5 | |
| High-level output voltage (driver) | VOH | 5 | 9 | V | DOUT at RL = 3kΩ to GND, DIN = GND | 5 | |
| Low-level output voltage (driver) | VOL | -5 | -9 | V | DOUT at RL = 3kΩ to GND, DIN = VCC | 5 | |
| High-level input current | IIH | 0 | 200 | µA | VI = VCC | 5 | |
| Low-level input current | IIL | 0 | -200 | µA | VI at 0V | 5 | |
| Short-circuit output current (MIN column) | IOS | -10 | 10 | mA | VCC = 5.5V, VO = 0V | 5 | |
| Short-circuit output current (MAX column) | IOS | -60 | 60 | mA | VCC = 5.5V, VO = 0V | 5 | |
| Output resistance | rO | 300 | Ω | VCC, V+, and V- = 0V, VO = ±2V | 5 | ||
| High-level output voltage (receiver) | VOH | 3.5 | V | IOH = -1mA | 5 | ||
| Low-level output voltage (receiver) | VOL | 0.4 | V | IOL = 1.6mA | 5 | ||
| Positive-going input threshold voltage | VIT+ | 1.7 | 2.4 | V | VCC = 5V, TA = 25°C | 5 | |
| Negative-going input threshold voltage | VIT- | 0.8 | 1.2 | V | VCC = 5V, TA = 25°C | 5 | |
| Input hysteresis (VIT+, VIT-) | Vhys | 0.2 | 0.5 | 1 | V | 5 | |
| Input resistance | ri | 3 | 5 | 7 | kΩ | VI = ±3V to ±25V | 5 |
| Maximum data rate | 120 | kbit/s | CL = 50pF to 1000pF, RL = 3kΩ to 7kΩ, one DOUT switching | 5 | |||
| Propagation delay time, low- to high-level output (driver) | tPLH(D) | 2 | µs | CL = 2500pF, RL = 3kΩ, all drivers loaded, see Figure 6-1 | 5 | ||
| Propagation delay time, high- to low-level output (driver) | tPHL(D) | 2 | µs | CL = 2500pF, RL = 3kΩ, all drivers loaded, see Figure 6-1 | 5 | ||
| Pulse skew (driver) | tsk(p) | 300 | ns | CL = 150 to 2500pF, RL = 3kΩ to 7 kΩ, see Figure 6-2 | 5 | ||
| Slew rate, transition region | SR(tr) | 3 | 6 | 30 | V/µs | CL = 50 to 1000pF, RL = 3kΩ to 7 kΩ, VCC = 5V, see Figure 6-1 | 5 |
| Propagation delay time, low- to high-level output (receiver) | tPLH(R) | 0.5 | 10 | µs | CL = 150pF | 5 | |
| Propagation delay time, high- to low-level output (receiver) | tPHL(R) | 0.5 | 10 | µs | CL = 150pF | 5 | |
| Pulse skew (receiver) | tsk(p) | 300 | ns | CL = 150pF | 5 | ||
| Junction-to-ambient thermal resistance | RθJA | 71.7 | °C/W | DW (SOIC) 16 pins | 4 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 37.6 | °C/W | DW (SOIC) 16 pins | 4 | ||
| Junction-to-board thermal resistance | RθJB | 36.8 | °C/W | DW (SOIC) 16 pins | 4 | ||
| Junction-to-top characterization parameter | ψJT | 13 | °C/W | DW (SOIC) 16 pins | 4 | ||
| Junction-to-board characterization parameter | ψJB | 36.4 | °C/W | DW (SOIC) 16 pins | 4 |
CAD (KiCad official)
- Symbol:
MAX202IDWR - Footprint:
Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm - 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
- 3D model files:
max202idwr-etched.step/max202idwr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);max202idwr.step/max202idwr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (27 pp, sha256
5e1fa0bb088ff8eb, retrieved 2026-11-17, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).