Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MAX202IDWR

Texas Instruments · Communication Interface Chip/UART/485/232 · SOIC-16-300mil

MAX202IDWR from Texas Instruments, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 C1+ passive Positive lead of C1 capacitor; 0.1 µF external capacitor required between C1+ and C1-.
2 V+ power_out Positive charge pump output for storage capacitor only; V+ is generated from VCC, and the datasheet recommends a 0.1 µF storage capacitor with capacitors up to 10 µF usable.
3 C1- passive Negative lead of C1 capacitor; 0.1 µF external capacitor required between C1+ and C1-.
4 C2+ passive Positive lead of C2 capacitor; 0.1 µF external capacitor required between C2+ and C2-.
5 C2- passive Negative lead of C2 capacitor; 0.1 µF external capacitor required between C2+ and C2-.
6 V- power_out Negative charge pump output for storage capacitor only; V- is generated by the charge pump and is limited to -14 V minimum in absolute maximum ratings.
7 DOUT2 output RS-232 line data output (to remote RS-232 system); outputs are protected against shorts to ground and rated ±15 kV HBM ESD.
8 RIN2 input RS-232 line data input (from remote RS-232 system); accepts up to ±30 V with input thresholds decoding down to ±3 V.
9 ROUT2 output Logic data output (to UART); an open RIN2 input results in a high output on ROUT2.
10 DIN2 input Logic data input (from UART); the driver input has no internal pullup and must not be left floating.
11 DIN1 input Logic data input (from UART); the driver input has no internal pullup and must not be left floating.
12 ROUT1 output Logic data output (to UART); an open RIN1 input results in a high output on ROUT1.
13 RIN1 input RS-232 line data input (from remote RS-232 system); accepts up to ±30 V with input thresholds decoding down to ±3 V.
14 DOUT1 output RS-232 line data output (to remote RS-232 system); outputs are protected against shorts to ground and rated ±15 kV HBM ESD.
15 GND power_in Ground; the datasheet asks for a low-impedance connection from this pin to the board ground plane for best ESD performance.
16 VCC power_in Supply voltage, connect to external 5 V power supply; VCC must be between 4.5 V and 5.5 V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-16-300mil
Category Communication Interface Chip/UART/485/232
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VCC 4.5 5 5.5 V 4
Driver high-level input voltage (DIN) VIH 2 V 4
Driver low-level input voltage (DIN) VIL 0.8 V 4
Driver input voltage (DIN) VI 0 5.5 V 4
Receiver input voltage -30 30 V 4
Operating free-air temperature TA -40 85 °C MAX202I 4
Supply voltage VCC -0.3 6 V 4
Positive charge pump voltage V+ 14 V 4
Negative charge pump voltage V- -14 0.3 V 4
Input voltage, drivers VI -0.3 V 4
Input voltage, receivers VI -30 30 V 4
Output voltage, receivers VO -0.3 V 4
Operating junction temperature TJ 150 °C 4
Storage temperature Tstg -65 150 °C 4
Supply current ICC 8 15 mA No load, VCC = 5V 5
High-level output voltage (driver) VOH 5 9 V DOUT at RL = 3kΩ to GND, DIN = GND 5
Low-level output voltage (driver) VOL -5 -9 V DOUT at RL = 3kΩ to GND, DIN = VCC 5
High-level input current IIH 0 200 µA VI = VCC 5
Low-level input current IIL 0 -200 µA VI at 0V 5
Short-circuit output current (MIN column) IOS -10 10 mA VCC = 5.5V, VO = 0V 5
Short-circuit output current (MAX column) IOS -60 60 mA VCC = 5.5V, VO = 0V 5
Output resistance rO 300 Ω VCC, V+, and V- = 0V, VO = ±2V 5
High-level output voltage (receiver) VOH 3.5 V IOH = -1mA 5
Low-level output voltage (receiver) VOL 0.4 V IOL = 1.6mA 5
Positive-going input threshold voltage VIT+ 1.7 2.4 V VCC = 5V, TA = 25°C 5
Negative-going input threshold voltage VIT- 0.8 1.2 V VCC = 5V, TA = 25°C 5
Input hysteresis (VIT+, VIT-) Vhys 0.2 0.5 1 V 5
Input resistance ri 3 5 7 kΩ VI = ±3V to ±25V 5
Maximum data rate 120 kbit/s CL = 50pF to 1000pF, RL = 3kΩ to 7kΩ, one DOUT switching 5
Propagation delay time, low- to high-level output (driver) tPLH(D) 2 µs CL = 2500pF, RL = 3kΩ, all drivers loaded, see Figure 6-1 5
Propagation delay time, high- to low-level output (driver) tPHL(D) 2 µs CL = 2500pF, RL = 3kΩ, all drivers loaded, see Figure 6-1 5
Pulse skew (driver) tsk(p) 300 ns CL = 150 to 2500pF, RL = 3kΩ to 7 kΩ, see Figure 6-2 5
Slew rate, transition region SR(tr) 3 6 30 V/µs CL = 50 to 1000pF, RL = 3kΩ to 7 kΩ, VCC = 5V, see Figure 6-1 5
Propagation delay time, low- to high-level output (receiver) tPLH(R) 0.5 10 µs CL = 150pF 5
Propagation delay time, high- to low-level output (receiver) tPHL(R) 0.5 10 µs CL = 150pF 5
Pulse skew (receiver) tsk(p) 300 ns CL = 150pF 5
Junction-to-ambient thermal resistance RθJA 71.7 °C/W DW (SOIC) 16 pins 4
Junction-to-case (top) thermal resistance RθJC(top) 37.6 °C/W DW (SOIC) 16 pins 4
Junction-to-board thermal resistance RθJB 36.8 °C/W DW (SOIC) 16 pins 4
Junction-to-top characterization parameter ψJT 13 °C/W DW (SOIC) 16 pins 4
Junction-to-board characterization parameter ψJB 36.4 °C/W DW (SOIC) 16 pins 4

CAD (KiCad official)

  • Symbol: MAX202IDWR
  • Footprint: Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm
  • 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
  • 3D model files: max202idwr-etched.step / max202idwr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); max202idwr.step / max202idwr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (27 pp, sha256 5e1fa0bb088ff8eb, retrieved 2026-11-17, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF