component

MAX16052AUT+T

Public Made by Adom

by adom

Analog Devices Inc Maxim Integrated Supervisor And Reset ICs, SOT-23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.

componentpower management (pmic)max16052aut+tfactory-2.0.0extractor-text
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
max16052aut-t / README.md
History Download
Ray Publish 0.1.0 a88a275 16d ago

MAX16052AUT+T

Analog Devices Inc Maxim Integrated · Supervisor And Reset ICs · SOT-23-6

MAX16052AUT+T from Analog Devices Inc Maxim Integrated, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 EN input Active-high logic-enable input that, when driven low, de-asserts OUT immediately independent of VIN; connect to VCC if not used.
2 GND power_in Ground reference for the device; all voltages are referenced to GND.
3 IN input High-impedance monitor input whose rising threshold is 0.5V and falling threshold is 0.495V, set by an external resistive divider.
4 OUT output Active-high open-drain output on the MAX16052 that requires an external pullup resistor and can be pulled up to 28V.
5 VCC power_in Supply voltage input that must be connected to 2.25V to 28V; bypass with a 0.1µF ceramic capacitor to GND in noisy systems.
6 CDELAY passive Capacitor-adjustable delay node where an external CDELAY capacitor to GND sets the IN-to-OUT delay as tDELAY = CDELAY × 4.0×10^6 + 30µs.

Key specifications

Parameter Value
Manufacturer Analog Devices Inc Maxim Integrated
Package SOT-23-6
Category Power Management (PMIC)
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating Voltage Range VCC 2.25 28 V 2
Operating Temperature Range TA -40 125 °C 2
Undervoltage Lockout UVLO 1.8 2 V VCC falling (Note 2) 2
VCC Supply Current ICC 18 37 µA MAX16052, no load, VCC = 3.3V 2
VCC Supply Current ICC 23 45 µA MAX16052, no load, VCC = 12V 2
VCC Supply Current ICC 38 61 µA MAX16052, no load, VCC = 28V 2
Threshold Voltage VTH 0.491 0.5 0.509 V VIN rising, 2.25V ≤ VCC ≤ 28V 2
Hysteresis VHYST 5 mV VIN falling 2
Input Current IIN -110 25 110 nA VIN = 0 or 28V 2
CDELAY Charge Current ICD 200 250 300 nA VCDELAY = 0V 2
CDELAY Threshold VTCD 0.95 1 1.05 V VCDELAY rising 2
CDELAY Pulldown Resistance RCDELAY 15 60 Ω VCC ≥ 2.25V, ISINK = 200μA 2
EN Low Voltage VIL 0.5 V 2
EN High Voltage VIH 1.4 V 2
EN Leakage Current ILEAK -110 20 110 nA VEN = 0 or 28V 2
OUT Low Voltage (Open-Drain or Push-Pull) VOL 0.2 V VCC ≥ 1.2V, ISINK = 90μA 2
OUT Low Voltage (Open-Drain or Push-Pull) VOL 0.3 V VCC ≥ 2.25V, ISINK = 0.5mA 2
OUT Low Voltage (Open-Drain or Push-Pull) VOL 0.4 V VCC > 4.5V, ISINK = 1mA 2
OUT Leakage Current (Open-Drain, MAX16052) ILKG 150 nA Output not asserted low, VOUT = 28V 2
Absolute Max VCC VCC -0.3 30 V Voltages referenced to GND 2
Absolute Max OUT (open-drain, MAX16052) OUT -0.3 30 V Voltages referenced to GND 2
Absolute Max EN, IN EN, IN -0.3 V Maximum is VCC + 0.3V, referenced to GND 2
Absolute Max CDELAY CDELAY -0.3 6 V Voltages referenced to GND 2
Input/Output Current (all pins) -20 20 mA 2
Junction Temperature TJ 150 °C 2
Storage Temperature Range TSTG -65 150 °C 2
Lead Temperature (soldering, 10s) 300 °C soldering, 10s 2
Soldering Temperature (reflow) 260 °C reflow 2
IN to OUT Propagation Delay tDELAY 30 µs VCC = 3.3V, VIN rising, VIN = VTH + 25mV, MAX16052 100kΩ pullup, CCDELAY = 0 3
IN to OUT Propagation Delay tDELAY 190 ms VCC = 3.3V, VIN rising, VIN = VTH + 25mV, MAX16052 100kΩ pullup, CCDELAY = 0.047μF 3
IN to OUT Falling Propagation Delay tDL 18 µs VCC = 3.3V, VIN falling, VIN = VTH - 30mV 3
Startup Delay (Note 3) 0.5 ms VCC = 2.25V, VIN = 0.525V, CCDELAY = 0 3
EN Minimum Input Pulse Width tMPW 1 µs 3
EN Glitch Rejection 100 ns 3
EN to OUT Delay (device enabled to disabled) tOFF 250 ns VCC = 3.3V, MAX16052, 100kΩ pullup resistor 3
EN to OUT Delay (device enabled to disabled) tOFF 300 ns VCC = 12V, MAX16052, 100kΩ pullup resistor 3
EN to OUT Delay (device disabled to enabled) tPROP 14 µs VCC = 3.3V, MAX16052, 100kΩ pullup resistor, CCDELAY = 0 3
EN to OUT Delay (device disabled to enabled) tPROP 190 ms MAX16052, 100kΩ pullup resistor, CCDELAY = 0.047μF 3

CAD (KiCad official)

  • Symbol: MAX16052AUT+T
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6 (KiCad packages3D, STEP)
  • 3D model files: max16052aut-t-etched.step / max16052aut-t-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); max16052aut-t.step / max16052aut-t.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices Inc Maxim Integrated datasheet (12 pp, sha256 ae27260a5658fd21, retrieved 2026-10-19, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF