Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity

main

Generated by kicad-footprint-generator · KiCad file format 20260206

Name	Last commit message	Last updated
docs	Publish 0.1.0 · Ray	16d ago
viewers	max16052aut-t: viewers · Ray	16d ago
max16052aut-t-etched.glb	Publish 0.1.0 · Ray	16d ago
max16052aut-t-etched.step	max16052aut-t: factory component page (tier=lcsc) · Ray	16d ago
max16052aut-t-hero.glb	max16052aut-t: hero GLB from the etched model (keeps the MPN mark) · Ray	16d ago
max16052aut-t-hero.overlay.json	Publish 0.1.0 · Ray	16d ago
max16052aut-t.glb	Publish 0.1.0 · Ray	16d ago
max16052aut-t.kicad_mod	Publish 0.1.0 · Ray	16d ago
max16052aut-t.kicad_sym	Publish 0.1.0 · Ray	16d ago
max16052aut-t.lbr	Publish 0.1.0 · Ray	16d ago
max16052aut-t.step	Publish 0.1.0 · Ray	16d ago
package.json	Publish 0.1.0 · Ray	16d ago
page.json	Set visibility: public · Ray	16d ago
README.md	Publish 0.1.0 · Ray	16d ago

MAX16052AUT+T

Analog Devices Inc Maxim Integrated · Supervisor And Reset ICs · SOT-23-6

MAX16052AUT+T from Analog Devices Inc Maxim Integrated, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin	Name	Type	Function
1	EN	input	Active-high logic-enable input that, when driven low, de-asserts OUT immediately independent of VIN; connect to VCC if not used.
2	GND	power_in	Ground reference for the device; all voltages are referenced to GND.
3	IN	input	High-impedance monitor input whose rising threshold is 0.5V and falling threshold is 0.495V, set by an external resistive divider.
4	OUT	output	Active-high open-drain output on the MAX16052 that requires an external pullup resistor and can be pulled up to 28V.
5	VCC	power_in	Supply voltage input that must be connected to 2.25V to 28V; bypass with a 0.1µF ceramic capacitor to GND in noisy systems.
6	CDELAY	passive	Capacitor-adjustable delay node where an external CDELAY capacitor to GND sets the IN-to-OUT delay as tDELAY = CDELAY × 4.0×10^6 + 30µs.

Key specifications

Parameter	Value
Manufacturer	Analog Devices Inc Maxim Integrated
Package	SOT-23-6
Category	Power Management (PMIC)
Pins	6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter	Symbol	Min	Typ	Max	Unit	Conditions	Page
Operating Voltage Range	VCC	2.25		28	V		2
Operating Temperature Range	TA	-40		125	°C		2
Undervoltage Lockout	UVLO	1.8		2	V	VCC falling (Note 2)	2
VCC Supply Current	ICC		18	37	µA	MAX16052, no load, VCC = 3.3V	2
VCC Supply Current	ICC		23	45	µA	MAX16052, no load, VCC = 12V	2
VCC Supply Current	ICC		38	61	µA	MAX16052, no load, VCC = 28V	2
Threshold Voltage	VTH	0.491	0.5	0.509	V	VIN rising, 2.25V ≤ VCC ≤ 28V	2
Hysteresis	VHYST		5		mV	VIN falling	2
Input Current	IIN	-110	25	110	nA	VIN = 0 or 28V	2
CDELAY Charge Current	ICD	200	250	300	nA	VCDELAY = 0V	2
CDELAY Threshold	VTCD	0.95	1	1.05	V	VCDELAY rising	2
CDELAY Pulldown Resistance	RCDELAY	15		60	Ω	VCC ≥ 2.25V, ISINK = 200μA	2
EN Low Voltage	VIL			0.5	V		2
EN High Voltage	VIH	1.4			V		2
EN Leakage Current	ILEAK	-110	20	110	nA	VEN = 0 or 28V	2
OUT Low Voltage (Open-Drain or Push-Pull)	VOL			0.2	V	VCC ≥ 1.2V, ISINK = 90μA	2
OUT Low Voltage (Open-Drain or Push-Pull)	VOL			0.3	V	VCC ≥ 2.25V, ISINK = 0.5mA	2
OUT Low Voltage (Open-Drain or Push-Pull)	VOL			0.4	V	VCC > 4.5V, ISINK = 1mA	2
OUT Leakage Current (Open-Drain, MAX16052)	ILKG			150	nA	Output not asserted low, VOUT = 28V	2
Absolute Max VCC	VCC	-0.3		30	V	Voltages referenced to GND	2
Absolute Max OUT (open-drain, MAX16052)	OUT	-0.3		30	V	Voltages referenced to GND	2
Absolute Max EN, IN	EN, IN	-0.3			V	Maximum is VCC + 0.3V, referenced to GND	2
Absolute Max CDELAY	CDELAY	-0.3		6	V	Voltages referenced to GND	2
Input/Output Current (all pins)		-20		20	mA		2
Junction Temperature	TJ			150	°C		2
Storage Temperature Range	TSTG	-65		150	°C		2
Lead Temperature (soldering, 10s)				300	°C	soldering, 10s	2
Soldering Temperature (reflow)				260	°C	reflow	2
IN to OUT Propagation Delay	tDELAY		30		µs	VCC = 3.3V, VIN rising, VIN = VTH + 25mV, MAX16052 100kΩ pullup, CCDELAY = 0	3
IN to OUT Propagation Delay	tDELAY		190		ms	VCC = 3.3V, VIN rising, VIN = VTH + 25mV, MAX16052 100kΩ pullup, CCDELAY = 0.047μF	3
IN to OUT Falling Propagation Delay	tDL		18		µs	VCC = 3.3V, VIN falling, VIN = VTH - 30mV	3
Startup Delay (Note 3)			0.5		ms	VCC = 2.25V, VIN = 0.525V, CCDELAY = 0	3
EN Minimum Input Pulse Width	tMPW		1		µs		3
EN Glitch Rejection			100		ns		3
EN to OUT Delay (device enabled to disabled)	tOFF		250		ns	VCC = 3.3V, MAX16052, 100kΩ pullup resistor	3
EN to OUT Delay (device enabled to disabled)	tOFF		300		ns	VCC = 12V, MAX16052, 100kΩ pullup resistor	3
EN to OUT Delay (device disabled to enabled)	tPROP		14		µs	VCC = 3.3V, MAX16052, 100kΩ pullup resistor, CCDELAY = 0	3
EN to OUT Delay (device disabled to enabled)	tPROP		190		ms	MAX16052, 100kΩ pullup resistor, CCDELAY = 0.047μF	3

CAD (KiCad official)

Symbol: MAX16052AUT+T
Footprint: Package_TO_SOT_SMD:SOT-23-6
3D model: SOT-23-6 (KiCad packages3D, STEP)
3D model files: max16052aut-t-etched.step / max16052aut-t-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); max16052aut-t.step / max16052aut-t.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

Datasheet: Analog Devices Inc Maxim Integrated datasheet (12 pp, sha256 ae27260a5658fd21, retrieved 2026-10-19, tier: lcsc)
Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF