component
MAX1487ESA+T-JSM
Public Made by Adomby adom
JSMSEMI RS-485 / RS-422 ICs, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
Initial commit: component/max1487esa-t-jsm
a183869
MAX1487ESA+T-JSM
JSMSEMI · RS-485 / RS-422 ICs · SOP-8
MAX1487ESA+T-JSM from JSMSEMI, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RO | output | Receiver output; outputs high when A−B ≥ −50 mV and low when A−B ≤ −200 mV with /RE low; goes high-impedance when /RE is high. |
| 2 | /RE | input | Receiver output enable, active low; RO is enabled when /RE is low; RO enters high-impedance state when /RE is high. |
| 3 | DE | input | Driver output enable; driver outputs are active when DE is high; driver outputs are high-impedance when DE is low; device enters low-power shutdown mode when /RE is high and DE is low. |
| 4 | DI | input | Driver input; with DE high, DI high forces B output high and A output low; DI low forces A output high and B output low. |
| 5 | GND | power_in | Ground reference, 0 V. |
| 6 | A | bidirectional | Non-inverting receiver input and non-inverting driver output; RS-485/RS-422 bus line A; receiver input voltage range ±15 kV ESD protected. |
| 7 | B | bidirectional | Inverting receiver input and inverting driver output; RS-485/RS-422 bus line B; receiver input voltage range ±15 kV ESD protected. |
| 8 | VCC | power_in | Positive supply voltage; operating range 3.0 V to 5.5 V; absolute maximum +7 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | JSMSEMI |
| Package | SOP-8 |
| Category | Interface |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
MAX1487ESA+T-JSM - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
max1487esa-t-jsm-etched.step/max1487esa-t-jsm-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);max1487esa-t-jsm.step/max1487esa-t-jsm.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: JSMSEMI datasheet (12 pp, sha256
ee499a0af46b6dad, retrieved 2026-09-18, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-sonnet-4-6(vision), consensusclaude-opus-4-7(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MAX1487ESA+T-JSM
**JSMSEMI** · RS-485 / RS-422 ICs · SOP-8
MAX1487ESA+T-JSM from JSMSEMI, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RO | output | Receiver output; outputs high when A−B ≥ −50 mV and low when A−B ≤ −200 mV with /RE low; goes high-impedance when /RE is high. |
| 2 | /RE | input | Receiver output enable, active low; RO is enabled when /RE is low; RO enters high-impedance state when /RE is high. |
| 3 | DE | input | Driver output enable; driver outputs are active when DE is high; driver outputs are high-impedance when DE is low; device enters low-power shutdown mode when /RE is high and DE is low. |
| 4 | DI | input | Driver input; with DE high, DI high forces B output high and A output low; DI low forces A output high and B output low. |
| 5 | GND | power_in | Ground reference, 0 V. |
| 6 | A | bidirectional | Non-inverting receiver input and non-inverting driver output; RS-485/RS-422 bus line A; receiver input voltage range ±15 kV ESD protected. |
| 7 | B | bidirectional | Inverting receiver input and inverting driver output; RS-485/RS-422 bus line B; receiver input voltage range ±15 kV ESD protected. |
| 8 | VCC | power_in | Positive supply voltage; operating range 3.0 V to 5.5 V; absolute maximum +7 V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | JSMSEMI |
| Package | SOP-8 |
| Category | Interface |
| Pins | 8 |
## CAD (KiCad official)
- Symbol: `MAX1487ESA+T-JSM`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files: `max1487esa-t-jsm-etched.step` / `max1487esa-t-jsm-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `max1487esa-t-jsm.step` / `max1487esa-t-jsm.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [JSMSEMI datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590931346347151360) (12 pp, sha256 `ee499a0af46b6dad`, retrieved 2026-09-18, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-sonnet-4-6` (vision), consensus `claude-opus-4-7` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/max1487esa-t-jsm-datasheet.pdf)