main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs max1487esa-t-jsm: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers max1487esa-t-jsm: viewers · Ray
max1487esa-t-jsm-etched.fit.json max1487esa-t-jsm: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
max1487esa-t-jsm-etched.glb max1487esa-t-jsm: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
max1487esa-t-jsm-etched.step max1487esa-t-jsm: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
max1487esa-t-jsm.glb Publish 0.1.0 · Ray
max1487esa-t-jsm.kicad_mod Publish 0.1.0 · Ray
max1487esa-t-jsm.kicad_sym Publish 0.1.0 · Ray
max1487esa-t-jsm.lbr Publish 0.1.0 · Ray
max1487esa-t-jsm.step Publish 0.1.0 · Ray
package.json max1487esa-t-jsm: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json max1487esa-t-jsm: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md Initial commit: component/max1487esa-t-jsm · Ray

MAX1487ESA+T-JSM

JSMSEMI · RS-485 / RS-422 ICs · SOP-8

MAX1487ESA+T-JSM from JSMSEMI, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RO output Receiver output; outputs high when A−B ≥ −50 mV and low when A−B ≤ −200 mV with /RE low; goes high-impedance when /RE is high.
2 /RE input Receiver output enable, active low; RO is enabled when /RE is low; RO enters high-impedance state when /RE is high.
3 DE input Driver output enable; driver outputs are active when DE is high; driver outputs are high-impedance when DE is low; device enters low-power shutdown mode when /RE is high and DE is low.
4 DI input Driver input; with DE high, DI high forces B output high and A output low; DI low forces A output high and B output low.
5 GND power_in Ground reference, 0 V.
6 A bidirectional Non-inverting receiver input and non-inverting driver output; RS-485/RS-422 bus line A; receiver input voltage range ±15 kV ESD protected.
7 B bidirectional Inverting receiver input and inverting driver output; RS-485/RS-422 bus line B; receiver input voltage range ±15 kV ESD protected.
8 VCC power_in Positive supply voltage; operating range 3.0 V to 5.5 V; absolute maximum +7 V.

Key specifications

Parameter Value
Manufacturer JSMSEMI
Package SOP-8
Category Interface
Pins 8

CAD (KiCad official)

  • Symbol: MAX1487ESA+T-JSM
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: max1487esa-t-jsm-etched.step / max1487esa-t-jsm-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); max1487esa-t-jsm.step / max1487esa-t-jsm.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: JSMSEMI datasheet (12 pp, sha256 ee499a0af46b6dad, retrieved 2026-09-18, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-sonnet-4-6 (vision), consensus claude-opus-4-7 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF