Generated by kicad-footprint-generator · KiCad file format 20260206
MAX13485EESA+T
Analog Devices Inc Maxim Integrated · RS-485 / RS-422 ICs · SOIC-8
MAX13485EESA+T from Analog Devices Inc Maxim Integrated, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RO | output | Receiver output: logic-high when A-B is greater than or equal to -50mV and logic-low when A-B is less than or equal to -200mV, and high impedance when RE is high. |
| 2 | RE | input | Receiver output enable: drive low to enable RO; drive high to make RO high impedance, and drive RE high with DE low to enter low-power shutdown (hot-swap input). |
| 3 | DE | input | Driver output enable: drive high to enable the driver outputs, which are high impedance when DE is low; RE high with DE low enters low-power shutdown (hot-swap input). |
| 4 | DI | input | Driver input: driving DI low forces the noninverting output low and the inverting output high, and driving DI high forces the noninverting output high and the inverting output low; logic inputs are rated VIL 0.8V max and VIH 2.0V min. |
| 5 | GND | power_in | Ground reference for all voltages on the device. |
| 6 | A | bidirectional | Noninverting receiver input and noninverting driver output, with ESD protection of ±15kV Human Body Model. |
| 7 | B | bidirectional | Inverting receiver input and inverting driver output, with ESD protection of ±15kV Human Body Model. |
| 8 | VCC | power_in | Positive supply, VCC = +5V ±5% (4.75V to 5.25V); bypass VCC to GND with a 0.1µF capacitor. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices Inc Maxim Integrated |
| Package | SOIC-8 |
| Category | Interface |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Differential Driver Output Voltage (RDIFF = 100Ω) | VOD | 2 | V | RDIFF = 100Ω, Figure 1 | 2 | ||
| Differential Driver Output Voltage (RDIFF = 54Ω) | VOD | 1.5 | V | RDIFF = 54Ω, Figure 1 | 2 | ||
| Change in Magnitude of Differential Output Voltage | ΔVOD | 0.2 | V | RDIFF = 100Ω or 54Ω, Figure 1 (Note 3) | 2 | ||
| Driver Common-Mode Output Voltage | VOC | 3 | V | RDIFF = 100Ω or 54Ω, Figure 1 | 2 | ||
| Change in Magnitude of Common-Mode Voltage | ΔVOC | 0.2 | V | RDIFF = 100Ω or 54Ω, Figure 1 (Note 3) | 2 | ||
| Input-High Voltage | VIH | 2 | V | DI, DE, RE | 2 | ||
| Input-Low Voltage | VIL | 0.8 | V | DI, DE, RE | 2 | ||
| Input Current | IIN | -1 | 1 | µA | DI, DE, RE | 2 | |
| Driver Short-Circuit Output Current (positive) | IOSD | 50 | 250 | mA | 0V < VOUT < +12V (Note 4) | 2 | |
| Driver Short-Circuit Output Current (negative) | IOSD | -250 | -50 | mA | -7V < VOUT < 0V (Note 4) | 2 | |
| Driver Short-Circuit Foldback Output Current (positive) | IOSDF | 20 | mA | (VCC - 1V) < VOUT < +12V (Note 3) | 2 | ||
| Driver Short-Circuit Foldback Output Current (negative) | IOSDF | -20 | mA | -7V < VOUT < 0V (Note 3) | 2 | ||
| Input Current (A and B) at +12V | IA, B | 250 | µA | DE = GND, VCC = GND or +5V; VIN = +12V | 2 | ||
| Input Current (A and B) at -7V | IA, B | -200 | µA | DE = GND, VCC = GND or +5V; VIN = -7V | 2 | ||
| Receiver-Differential-Threshold Voltage | VTH | -200 | -50 | mV | -7V < VCM < +12V | 2 | |
| Output-Low Voltage | VOL | 0.4 | V | IO = 1mA, VA - VB < -VTH | 3 | ||
| Tri-State Output Current at Receiver | IOZR | -1 | 1 | µA | 0V < VO < VCC | 3 | |
| Receiver Input Resistance | RIN | 48 | kΩ | -7V < VCM < +12V | 3 | ||
| Receiver-Output Short-Circuit Current | IOSR | 7 | 95 | mA | 0V < VRO < VCC | 3 | |
| Supply Voltage | VCC | 4.75 | 5.25 | V | 3 | ||
| Supply Current | ICC | 4.5 | mA | DE = 1, RE = 0, no load | 3 | ||
| Shutdown Supply Current | ISHDN | 10 | µA | DE = 0, RE = 1 | 3 | ||
| ESD Protection (A, B) Air Gap Discharge IEC61000-4-2 (MAX13485E) | -15 | 15 | kV | IEC61000-4-2 | 3 | ||
| ESD Protection (A, B) Human Body Model | -15 | 15 | kV | Human Body Model | 3 | ||
| ESD Protection (All Other Pins) Human Body Model | -2 | 2 | kV | Human Body Model | 3 | ||
| Driver Propagation Delay (tDPLH) | tDPLH | 200 | 1000 | ns | RDIFF = 54Ω, CL = 50pF, Figures 2 and 3 | 3 | |
| Driver Propagation Delay (tDPHL) | tDPHL | 200 | 1000 | ns | RDIFF = 54Ω, CL = 50pF, Figures 2 and 3 | 3 | |
| Driver-Differential Output Rise or Fall Time (tHL) | tHL | 250 | 900 | ns | RDIFF = 54Ω, CL = 50pF, Figures 2 and 3 | 3 | |
| Driver-Differential Output Rise or Fall Time (tLH) | tLH | 250 | 900 | ns | RDIFF = 54Ω, CL = 50pF, Figures 2 and 3 | 3 | |
| Driver-Differential Output Skew | /tDPLH - tDPHL/ | 140 | ns | RDIFF = 54Ω, CL = 50pF, Figures 2 and 3 | 3 | ||
| Driver Enable to Output High | tDZH | 2500 | ns | Figures 4 and 5 | 3 | ||
| Driver Enable to Output Low | tDZL | 2500 | ns | Figures 4 and 5 | 3 | ||
| Driver Disable Time from High | tDHZ | 100 | ns | Figures 4 and 5 | 3 | ||
| Driver Disable Time from Low | tDLZ | 100 | ns | Figures 4 and 5 | 3 | ||
| Driver Enable from Shutdown to Output High | tDZH(SHDN) | 5500 | ns | Figures 4 and 5 | 3 | ||
| Driver Enable from Shutdown to Output Low | tDZL(SHDN) | 5500 | ns | Figures 4 and 5 | 3 | ||
| Time to Shutdown | tSHDN | 50 | 340 | 700 | ns | 3 | |
| Receiver Propagation Delay (tRPLH) | tRPLH | 80 | ns | CL = 15pF, Figures 6 and 7 | 3 | ||
| Receiver Propagation Delay (tRPHL) | tRPHL | 80 | ns | CL = 15pF, Figures 6 and 7 | 3 | ||
| Receiver Output Skew | tRSKEW | 13 | ns | CL = 15pF, Figure 7 | 3 | ||
| Receiver Enable to Output High | tRZH | 50 | ns | Figure 8 | 4 | ||
| Receiver Enable to Output Low | tRZL | 50 | ns | Figure 8 | 4 | ||
| Receiver Disable Time from High | tRHZ | 50 | ns | Figure 8 | 4 | ||
| Receiver Disable Time from Low | tRLZ | 50 | ns | Figure 8 | 4 | ||
| Receiver Enable from Shutdown to Output High | tRZH(SHDN) | 2200 | ns | Figure 8 | 4 | ||
| Receiver Enable from Shutdown to Output Low | tRZL(SHDN) | 2200 | ns | Figure 8 | 4 | ||
| Supply Voltage (absolute maximum, VCC to GND) | VCC | 6 | V | Referenced to GND | 2 | ||
| Digital Input/Enable Voltage (DE, RE, DI) | DE, RE, DI | -0.3 | 6 | V | Referenced to GND | 2 | |
| Bus Pin Voltage (A, B) | A, B | -8 | 13 | V | Referenced to GND | 2 | |
| Operating Temperature Range | TA | -40 | 85 | °C | 2 | ||
| Junction Temperature | TJ | 150 | °C | 2 | |||
| Storage Temperature Range | TSTG | -65 | 150 | °C | 2 | ||
| Lead Temperature (soldering, 10s) | 300 | °C | Soldering, 10s | 2 | |||
| Input Hysteresis (receiver) | ΔVTH | 25 | mV | VA + VB = 0V | 2 |
CAD (KiCad official)
- Symbol:
MAX13485EESA+T - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
max13485eesa-t-etched.step/max13485eesa-t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);max13485eesa-t.step/max13485eesa-t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices Inc Maxim Integrated datasheet (16 pp, sha256
72f065fccab28fc9, retrieved 2026-10-19, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).