Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MAX13485EESA+T

Analog Devices Inc Maxim Integrated · RS-485 / RS-422 ICs · SOIC-8

MAX13485EESA+T from Analog Devices Inc Maxim Integrated, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RO output Receiver output: logic-high when A-B is greater than or equal to -50mV and logic-low when A-B is less than or equal to -200mV, and high impedance when RE is high.
2 RE input Receiver output enable: drive low to enable RO; drive high to make RO high impedance, and drive RE high with DE low to enter low-power shutdown (hot-swap input).
3 DE input Driver output enable: drive high to enable the driver outputs, which are high impedance when DE is low; RE high with DE low enters low-power shutdown (hot-swap input).
4 DI input Driver input: driving DI low forces the noninverting output low and the inverting output high, and driving DI high forces the noninverting output high and the inverting output low; logic inputs are rated VIL 0.8V max and VIH 2.0V min.
5 GND power_in Ground reference for all voltages on the device.
6 A bidirectional Noninverting receiver input and noninverting driver output, with ESD protection of ±15kV Human Body Model.
7 B bidirectional Inverting receiver input and inverting driver output, with ESD protection of ±15kV Human Body Model.
8 VCC power_in Positive supply, VCC = +5V ±5% (4.75V to 5.25V); bypass VCC to GND with a 0.1µF capacitor.

Key specifications

Parameter Value
Manufacturer Analog Devices Inc Maxim Integrated
Package SOIC-8
Category Interface
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Differential Driver Output Voltage (RDIFF = 100Ω) VOD 2 V RDIFF = 100Ω, Figure 1 2
Differential Driver Output Voltage (RDIFF = 54Ω) VOD 1.5 V RDIFF = 54Ω, Figure 1 2
Change in Magnitude of Differential Output Voltage ΔVOD 0.2 V RDIFF = 100Ω or 54Ω, Figure 1 (Note 3) 2
Driver Common-Mode Output Voltage VOC 3 V RDIFF = 100Ω or 54Ω, Figure 1 2
Change in Magnitude of Common-Mode Voltage ΔVOC 0.2 V RDIFF = 100Ω or 54Ω, Figure 1 (Note 3) 2
Input-High Voltage VIH 2 V DI, DE, RE 2
Input-Low Voltage VIL 0.8 V DI, DE, RE 2
Input Current IIN -1 1 µA DI, DE, RE 2
Driver Short-Circuit Output Current (positive) IOSD 50 250 mA 0V < VOUT < +12V (Note 4) 2
Driver Short-Circuit Output Current (negative) IOSD -250 -50 mA -7V < VOUT < 0V (Note 4) 2
Driver Short-Circuit Foldback Output Current (positive) IOSDF 20 mA (VCC - 1V) < VOUT < +12V (Note 3) 2
Driver Short-Circuit Foldback Output Current (negative) IOSDF -20 mA -7V < VOUT < 0V (Note 3) 2
Input Current (A and B) at +12V IA, B 250 µA DE = GND, VCC = GND or +5V; VIN = +12V 2
Input Current (A and B) at -7V IA, B -200 µA DE = GND, VCC = GND or +5V; VIN = -7V 2
Receiver-Differential-Threshold Voltage VTH -200 -50 mV -7V < VCM < +12V 2
Output-Low Voltage VOL 0.4 V IO = 1mA, VA - VB < -VTH 3
Tri-State Output Current at Receiver IOZR -1 1 µA 0V < VO < VCC 3
Receiver Input Resistance RIN 48 kΩ -7V < VCM < +12V 3
Receiver-Output Short-Circuit Current IOSR 7 95 mA 0V < VRO < VCC 3
Supply Voltage VCC 4.75 5.25 V 3
Supply Current ICC 4.5 mA DE = 1, RE = 0, no load 3
Shutdown Supply Current ISHDN 10 µA DE = 0, RE = 1 3
ESD Protection (A, B) Air Gap Discharge IEC61000-4-2 (MAX13485E) -15 15 kV IEC61000-4-2 3
ESD Protection (A, B) Human Body Model -15 15 kV Human Body Model 3
ESD Protection (All Other Pins) Human Body Model -2 2 kV Human Body Model 3
Driver Propagation Delay (tDPLH) tDPLH 200 1000 ns RDIFF = 54Ω, CL = 50pF, Figures 2 and 3 3
Driver Propagation Delay (tDPHL) tDPHL 200 1000 ns RDIFF = 54Ω, CL = 50pF, Figures 2 and 3 3
Driver-Differential Output Rise or Fall Time (tHL) tHL 250 900 ns RDIFF = 54Ω, CL = 50pF, Figures 2 and 3 3
Driver-Differential Output Rise or Fall Time (tLH) tLH 250 900 ns RDIFF = 54Ω, CL = 50pF, Figures 2 and 3 3
Driver-Differential Output Skew /tDPLH - tDPHL/ 140 ns RDIFF = 54Ω, CL = 50pF, Figures 2 and 3 3
Driver Enable to Output High tDZH 2500 ns Figures 4 and 5 3
Driver Enable to Output Low tDZL 2500 ns Figures 4 and 5 3
Driver Disable Time from High tDHZ 100 ns Figures 4 and 5 3
Driver Disable Time from Low tDLZ 100 ns Figures 4 and 5 3
Driver Enable from Shutdown to Output High tDZH(SHDN) 5500 ns Figures 4 and 5 3
Driver Enable from Shutdown to Output Low tDZL(SHDN) 5500 ns Figures 4 and 5 3
Time to Shutdown tSHDN 50 340 700 ns 3
Receiver Propagation Delay (tRPLH) tRPLH 80 ns CL = 15pF, Figures 6 and 7 3
Receiver Propagation Delay (tRPHL) tRPHL 80 ns CL = 15pF, Figures 6 and 7 3
Receiver Output Skew tRSKEW 13 ns CL = 15pF, Figure 7 3
Receiver Enable to Output High tRZH 50 ns Figure 8 4
Receiver Enable to Output Low tRZL 50 ns Figure 8 4
Receiver Disable Time from High tRHZ 50 ns Figure 8 4
Receiver Disable Time from Low tRLZ 50 ns Figure 8 4
Receiver Enable from Shutdown to Output High tRZH(SHDN) 2200 ns Figure 8 4
Receiver Enable from Shutdown to Output Low tRZL(SHDN) 2200 ns Figure 8 4
Supply Voltage (absolute maximum, VCC to GND) VCC 6 V Referenced to GND 2
Digital Input/Enable Voltage (DE, RE, DI) DE, RE, DI -0.3 6 V Referenced to GND 2
Bus Pin Voltage (A, B) A, B -8 13 V Referenced to GND 2
Operating Temperature Range TA -40 85 °C 2
Junction Temperature TJ 150 °C 2
Storage Temperature Range TSTG -65 150 °C 2
Lead Temperature (soldering, 10s) 300 °C Soldering, 10s 2
Input Hysteresis (receiver) ΔVTH 25 mV VA + VB = 0V 2

CAD (KiCad official)

  • Symbol: MAX13485EESA+T
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: max13485eesa-t-etched.step / max13485eesa-t-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); max13485eesa-t.step / max13485eesa-t.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices Inc Maxim Integrated datasheet (16 pp, sha256 72f065fccab28fc9, retrieved 2026-10-19, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF