MachinePinLargeShort - Short Large Machine Pin

{
  "mpn": "MachinePinLargeShort",
  "wiki": "https://wiki.adom.inc/adom/machinepinlargeshort",
  "source": "/home/adom/aiflow-esc-astra/components/quality-audit/provenance-snapshots/adom__machinepinlargeshort/MachinePinLargeShort.step",
  "sourceSha256": "5475aa33d2f5ec24d675ad72c0b576f612b24dc06f0fd15ba330dc87dc7a2f0e",
  "processingInputSha256": "5475aa33d2f5ec24d675ad72c0b576f612b24dc06f0fd15ba330dc87dc7a2f0e",
  "rotationDegrees": 0,
  "restoredOriginalFrame": true,
  "text": "MachinePinLargeShort",
  "mode": "flat",
  "classification": "source-derived identification variant; marking geometry generated by Adom STEP engine",
  "generator": "Adom STEP engine 1.3.0 f02d0909",
  "reusedReviewedCache": false,
  "job": {
    "ok": true,
    "job_id": "6ad71f22b311716e",
    "status": "queued",
    "poll": "/jobs/6ad71f22b311716e",
    "result_type": "application/step",
    "client": "astra-esc-mpn",
    "job_name": "machinepinlargeshort-long-axis"
  },
  "plainBoundsMm": {
    "xmin": -2.4000000000000323,
    "xmax": 2.400000000000028,
    "ymin": -2.40000000000003,
    "ymax": 2.40000000000003,
    "zmin": -10.35,
    "zmax": 8.4000001,
    "xlen": 4.80000000000006,
    "ylen": 4.80000000000006,
    "zlen": 18.7500001
  },
  "markedBoundsMm": {
    "xmin": -2.400000000000002,
    "xmax": 2.3999999999999995,
    "ymin": -2.4,
    "ymax": 2.4,
    "zmin": -10.350000000000001,
    "zmax": 8.4000001,
    "xlen": 4.800000000000002,
    "ylen": 4.8,
    "zlen": 18.7500001
  },
  "step": "/home/adom/aiflow-esc-astra/components/quality-audit/all-marked/machinepinlargeshort/machinepinlargeshort-mpn.step",
  "stepSha256": "b27ad91ad472b59e3d0e4c93a1ff7ab93e5ad8eb4ea4ebcb51edbfd5ea9f431e",
  "limitations": "Identification aid, not factory marking or dimensional qualification. Tiny passives require zoom. Original geometry provenance and rights remain those of the source.",
  "review": "Contact sheet and representative closeups reviewed; geometric fit checked; native board check reported on ESC project",
  "surfaceFit": {
    "fittedTextBoundsMm": [
      0.30302308827722985,
      2.6880000000000335,
      0.001
    ],
    "textCenterMm": [
      -1.8240000000000252,
      0.0,
      8.400500000000001
    ],
    "textRotationDegrees": 270,
    "generatedTextScale": 0.32508703595396354,
    "fitRule": "Largest sampled rectangle on upper planar body face (including body below raised terminals); 86% length and 70% width maximum, both orientations compared; 1um identification geometry; sampled face containment excludes holes",
    "plainGeometryPreserved": "Original assembly retained; only separate text group added"
  },
  "colorPreservingDocument": true,
  "fitRevision": 2,
  "localGlyphFallback": true,
  "glb": "/home/adom/aiflow-esc-astra/components/quality-audit/all-marked/machinepinlargeshort/machinepinlargeshort-mpn.glb",
  "glbSha256": "d971d404379a093b17c85570b060fbdd82de36b01475e2ac49a5a245eda13d75",
  "png": "/home/adom/aiflow-esc-astra/components/quality-audit/all-marked/machinepinlargeshort/machinepinlargeshort-mpn.png",
  "pngSha256": "257eb8a9ae268359d67cb33e891aa4b29a665cb34e333cb5ba1be9b4e202a49f",
  "publishedUtc": "2026-09-16T22:48:09.919669+00:00",
  "combinedModelPublished": true,
  "redistributionEvidence": "Adom-owned source model. Adom CEO explicitly authorized publication of these MPN-marked derivatives on 2026-09-16; see ADOM-ASSET-PERMISSION.md and adom-asset-authorization.json. Original package license is retained; this records additional permission for the marked variant, not a replacement blanket license.",
  "sourceFileHeader": "ISO-10303-21;\nHEADER;\n/* Generated by software containing ST-Developer\n * from STEP Tools, Inc. (www.steptools.com) \n */\n\nFILE_DESCRIPTION(\n/* description */ (''),\n/* implementation_level */ '2;1');\n\nFILE_NAME(\n/* name */ 'MachinePin_Large_Short_Gold v74.step',\n/* time_stamp */ '2026-01-07T11:18:06-08:00',\n/* author */ (''),\n/* organization */ (''),\n/* preprocessor_version */ 'ST-DEVELOPER v20.1',\n/* originating_system */ 'Autodesk Translation Framework v14.21.0.0',\n/* authorisation */ '');\n\nFILE_SCHEMA (('AUTOMOTIVE_DESIGN { 1 0 10303 214 3 1 1 }'));\nENDSEC;\n\nDATA;\n#10=MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',(#20,#21),\n#4388);\n#11=ITEM_DEFINED_TRANSFORMATION($,$,#2076,#2239);\n#12=(\nREPRESENTATION_RELATIONSHIP($,$,#4399,#4398)\nREPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#11)\nSHAPE_REPRESENTATION_RELATIONSHIP()\n);\n#13=CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#12,#4397);\n#14=NEXT_ASSEMBLY_USAGE_OCCURRENCE('MpinContact_Large v3:4',\n'MpinContact_Large v3:4','MpinContact_Large v3:4',#4401,#4402,\n'MpinContact_Large v3:4');\n#15=SPHERICAL_SURFACE('',#2235,0.92500000000001);\n#16=SHAPE_REPRESENTATION_RELATIONSHIP('SRR','None',#4399,#18);\n#17=SHAPE_REPRESENTATION_RELATIONSHIP('SRR','None',#4398,#19);\n#18=ADVANCED_BREP_SHAPE_REPRESENTATION('',(#22),#4387);\n#19=ADVANCED_BREP_SHAPE_REPRESENTATION('',(#23),#4386);\n#20=STYLED_ITEM('',(#4413),#22);\n#21=STYLED_ITEM('',(#4412),#23);\n#22=MANIFOLD_SOLID_BREP('Body2',#2061);\n#23=MANIFOLD_SOLID_BREP('Body1',#2062);\n#24=(\nBOUNDED_CURVE()\nB_SPLINE_CURVE(2,(#3683,#3684,#3685),.UNSPECIFIED.,.F.,.F.)\nB_SPLINE_CURVE_WITH_KNOTS((3,3),(0.122215177678264,0.132489023114736),\n .UNSPECIFIED.)\nCURVE()\nGEOMETRIC_REPRESENTATION_ITEM()\nRATIONAL_B_SPLINE_CURVE((1.01393884885927,1.01380820297288,1.01355709050227))\nREPRESENTATION_ITEM('')\n);\n#25=(\nBOUNDED_CURVE()\nB_SPLINE_CURVE(2,(#3686,#3687,#3688),.UNSPECIFIED.,.F.,.F.)\nB_SPLINE_CURVE_WITH_KNOTS((3,3),(0.0896573826745192,0.0999312304886047),\n .UNSPECIFIED.)\nCURVE()\nGEOMETRIC_REPRESENTATION_ITEM()\nRATIONAL_B_SPLINE_CURVE((1.01355709050222,1.01380820303095,1.01393884891969))\nREPRESENTATION_ITEM('')\n);\n#26=(\nBOUNDED_CURVE()\nB_SPLINE_CURVE(2,(#3810,#3811,#3812),.UNSPECIFIED.,.F.,.F.)\nB_SPLINE_CURVE_WITH_KNOTS((3,3),(0.122215177678254,0.132489023114726),\n .UNSPECIFIED.)\nCURVE()\nGEOMETRIC_REPRESENTATION_ITEM()\nRATIONAL_B_SPLINE_CURVE((1.01393884885925,1.01380820297286,1.01355709050225))\nREPRESENTATION_ITEM('')\n);\n#27=(\nBOUNDED_CURVE()\nB_SPLINE_CURVE(2,(#3813,#3814,#3815),.UNSPECIFIED.,.F.,.F.)\nB_SPLINE_CURVE_WITH_KNOTS((3,3),(0.0896573826745263,0.0999312304886114),\n .UNSPECIFIED.)\nCURVE()\nGEOMETRIC_REPRESENTATION_ITEM()\nRATIONAL_B_SPLINE_CURVE((1.01355709050213,1.01380820303085,1.01393884891959))\nREPRESENTATION_ITEM('')\n);\n#28=(\nBOUNDED_CURVE()\nB_SPLINE_CURVE(2,(#3937,#3938,#3939),.UNSPECIFIED.,.F.,.F.)\nB_SPLINE_CURVE_WITH_KNOTS((3,3),(0.122215177678256,0.132489023114728),\n .UNSPECIFIED.)\nCURVE()\nGEOMETRIC_REPRESENTATION_ITEM()\nRATIONAL_B_SPLINE_CURVE((1.01393884885928,1.01380820297289,1.01355709050228))\nREPRESENTATION_ITEM('')\n);\n#29=(\nBOUNDED_CURVE()\nB_SPLINE_CURVE(2,(#3940,#3941,#3942),.UNSPECIFIED.,.F.,.F.)\nB_SPLINE_CURVE_WITH_KNOTS((3,3),(0.0896573826745116,0.0999312304885955),\n .UNSPECIFIED.)\nCURVE()\nGEOMETRIC_REPRESENTATION_ITEM()\nRATIONAL_B_SPLINE_CURVE((1.01355709050217,1.01380820303089,1.01393884891963))\nREPRESENTATION_ITEM('')\n);\n#30=(\nBOUNDED_CURVE()\nB_SPLINE_CURVE(2,(#4064,#4065,#4066),.UNSPECIFIED.,.F.,.F.)\nB_SPLINE_CURVE_WITH_KNOTS((3,3),(0.12221517767819,0.132489023114661),\n .UNSPECIFIED.)\nCURVE()\nGEOMETRIC_REPRESENTATION_ITEM()\nRATIONAL_B_SPLINE_CURVE((1.01393884885893,1.01380820297255,1.01355709050194))\nREPRESENTATION_ITEM('')\n);\n#31=(\nBOUNDED_CURVE()\nB_SPLINE_CURVE(2,(#4067,#4068,#4069),.UNSPECIFIED.,.F.,.F.)\nB_SPLINE_CURVE_WITH_KNOTS((3,3),(0.0896573826745843,0.0999312304886698),\n .UNSPECIFIED.)\nCURVE()\nGEOMETRIC_REPRESENTATION_ITEM()\nRATIONAL_B_SPLINE_CURVE((1.01355709050191,1.01380820303063,1.01393884891937))\nREPRESENTATION_ITEM('')\n);\n#32=(\nBOUNDED_CURVE()\nB_SPLINE_CURVE(2,(#4191,#4192,#4193),.UNSPECIFIED.,.F.,.F.)\nB_SPLINE_CURVE_WITH_KNOTS((3,3),(0.122215177678273,0.132489023114745),\n .UNSPECIFIED.)\nCURVE()\nGEOMETRIC_REPRESENTATION_ITEM()\nRATIONAL_B_SPLINE_CURVE((1.01393884885937,1.01380820297298,1.01355709050237))\nREPRESENTATION_ITEM('')\n);\n#33=(\nBOUNDED_CURVE()\nB_SPLINE_CURVE(2,(#4194,#4195,#4196),.UNSPECIFIED.,.F.,.F.)\nB_SPLINE_CURVE_WITH_KNOTS((3,3),(0.089657382674551,0.099931230488636),\n .UNSPECIFIED.)\nCURVE()\nGEOMETRIC_REPRESENTATION_ITEM()\nRATIONAL_B_SPLINE_CURVE((1.01355709050199,1.01380820303071,1.01393884891945))\nREPRESENTATION_ITEM('')\n);\n#34=(\nBOUNDED_CURVE()\nB_SPLINE_CURVE(2,(#4318,#4319,#4320),.UNSPECIFIED.,.F.,.F.)\nB_SPLINE_CURVE_WITH_KNOTS((3,3),(0.122215177678256,0.132489023114728),\n .UNSPECIFIED.)\nCURVE()\nGEOMETRIC_REPRESENTATION_ITEM()\nRATIONAL_B_SPLINE_CURVE((1.01393884885929,1.0138082029729,1.01355709050229))\nREPRESENTATION_ITEM('')\n);\n#35=(\nBOUNDED_CURVE()\nB_SPLINE_CURVE(2,(#4321,#4322,#4323),.UNSPECIFIED.,.F.,.F.)\nB_SPLINE_CURVE_WITH_KNOTS((3,3),(0.0896573826745967,0.0999312304886822),\n .UNSPECIFIED.)\nCURVE()\nGEOMETRIC_REPRESENTATION_ITEM()\nRATIONAL_B_SPLINE_CURVE((1.01355709050182,1.01380820303054,1.01393884891928))\nREPRESENTATION_ITEM('')\n);\n#36=CONICAL_SURFACE('',#2111,1.175,0.230002824274458);\n#37=CONICAL_SURFACE('',#2112,0.895,0.230002824274458);\n#38=CONICAL_SURFACE('',#2130,1.175,0.230002824274458);\n#39=CONICAL_SURFACE('',#2131,0.895,0.230002824274458);\n#40=CONICAL_SURFACE('',#2149,1.175,0.230002824274458);\n#41=CONICAL_SURFACE('',#2150,0.895,0.230002824274458);\n#42=CONICAL_SURFACE('',#2168,1.175,0.230002824274458);\n#43=CONICAL_SURFACE('',#2169,0.895,0.230002824274458);\n#44=CONICAL_SURFACE('',#2187,1.175,0.230002824274458);\n#45=CONICAL_SURFACE('',#2188,0.895,0.230002824274458);\n#46=CONICAL_SURFACE('',#2206,1.175,0.230002824274458);\n#47=CONICAL_SURFACE('',#2207,0.895,0.230002824274458);\n#48=CONICAL_SURFACE('',#2210,1.725,0.785398163397451);\n#49=CONICAL_SURFACE('",
  "overlaySha256": "1a0eb1292f13fc80d56e829001683f0be55e9d5afc8586dae6f37599f9c96c30",
  "overlayClassification": "AI-generated fitted identification glyph geometry, separate from original component body",
  "sourceChange": null
}