main
History Download
Ray Publish 0.1.0 d89b6fd

MA820GQ-Z

Monolithic Power Systems · Position Sensors · QFN-16(3x3)

MA820GQ-Z from Monolithic Power Systems, in a QFN-16(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 /A output Channel A inverted; output of the incremental interface.
2 A output Channel A; output of the incremental interface.
3 Z output Index pulse Z; output of the incremental interface.
4 MOSI input SPI data in, with an internal pull-down resistor.
5 CS input SPI chip select, with an internal pull-up resistor.
6 B output Channel B; output of the incremental interface.
7 MISO tri_state SPI data out, with an internal pull-down resistor enabled at high impedance state.
8 GND power_in Supply ground.
9 /Z output Index pulse Z inverted; output of the incremental interface.
10 TEST input Test pin; connect to ground.
11 MGL output Digital output indicating field strength below MGLT level.
12 SCLK input SPI clock, with an internal pull-down resistor.
13 VDD power_in 3.3V supply (3.0V to 3.6V recommended operating range).
14 N/C unconnected No connection; leave unconnected.
15 /B output Channel B inverted; output of the incremental interface.
16 MGH output Digital output indicating field strength above MGHT level.
17 PAD passive Exposed pad; recommended to be connected to ground for optimum electrical, thermal and mechanical conditions.

Key specifications

Parameter Value
Manufacturer Monolithic Power Systems
Package QFN-16(3x3)
Category Sensors
Pins 17

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VDD 3 3.3 3.6 V 4
Supply current IDD 10.2 11.7 13.8 mA 4
Operating temperature Top -40 125 °C 4
Applied magnetic field B 30 60 mT 4
Supply voltage (abs max) -0.5 4.6 V 3
Input pin voltage VI -0.5 6 V 3
Output pin voltage VO -0.5 4.6 V 3
Continuous power dissipation 2 W TA = +25°C 3
Junction temperature TJ 125 °C 3
Storage temperature -65 150 °C 3
Thermal resistance junction-ambient θJA 50 °C/W QFN-16 (3mmx3mm), JESD51-7 4-layer PCB 3
Thermal resistance junction-case θJC 12 °C/W QFN-16 (3mmx3mm), JESD51-7 4-layer PCB 3
Effective resolution 8 bits 3σ deviation of the noise distribution 5
Noise rms 0.005 0.01 0.02 deg 5
Refresh rate 850 980 1100 kHz 5
Data output length 8 8 bits 5
Power-up time 20 ms 5
INL at 25°C 0.7 deg At room temperature over the full field range 5
INL between -40°C to +125°C 1.1 deg Over the full temperature range and field range 5
Temperature induced drift at room temperature 0.015 0.04 deg/°C 5
Temperature induced variation 25°C to 85°C 0.5 1.2 deg From 25°C to 85°C 5
Temperature induced variation 25°C to 125°C 1 2.1 deg From 25°C to 125°C 5
Pulses per channel per turn PPT+1 1 64 Programmable 5
Resolution - edges per turn 4 256 Programmable 5
Systematic jitter 6 % For PPT = 63, 0 - 100krpm 5
Random jitter (3σ) 0.6 % For PPT = 63, 0 - 100krpm 5
Overall ABZ jitter 0.4 deg 5
Input high voltage VIH 2.5 5.5 V 5
Input low voltage VIL -0.3 0.8 V 5
Pull-up resistor RPU 46 66 97 kΩ 5
Pull-down resistor RPD 43 55 97 kΩ 5
Rising edge slew rate TR 0.7 V/ns CL = 50pF 6
Falling edge slew rate TF 0.7 V/ns CL = 50pF 6
SCLK period tsclk 40 ns 12
Idle time between two angle transmissions tidleAngle 150 ns 12
Idle time before and after register readout tidleReg 750 ns 12
NVM update idle time tnvm 20 ms 12
CS falling to SCLK falling tcsL 80 ns 12
SCLK low level tsclkL 20 ns 12
SCLK high level tsclkH 20 ns 12
SCLK rising to CS rising tcsH 25 ns 12
SCLK setting edge to MISO valid tMISO 15 ns 12
MOSI valid to SCLK reading edge tMOSI 15 ns 12
Latency 4 ms Constant speed propagation delay 5
Filter cutoff frequency Fcutoff 90 Hz 5
Magnetic field detection hysteresis MagHys 6 mT 5
Magnetic field detection threshold temperature drift -600 ppm/°C 5

CAD (KiCad official)

  • Symbol: MA820GQ-Z
  • Footprint: Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm
  • 3D model: QFN-16(3x3) (KiCad packages3D, STEP)
  • 3D model files: ma820gq-z-etched.step / ma820gq-z-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ma820gq-z.step / ma820gq-z.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Monolithic Power Systems datasheet (25 pp, sha256 f80463c32942632b, retrieved 2026-10-31, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF