Generated by kicad-footprint-generator · KiCad file format 20260206
MA820GQ-Z
Monolithic Power Systems · Position Sensors · QFN-16(3x3)
MA820GQ-Z from Monolithic Power Systems, in a QFN-16(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | /A | output | Channel A inverted; output of the incremental interface. |
| 2 | A | output | Channel A; output of the incremental interface. |
| 3 | Z | output | Index pulse Z; output of the incremental interface. |
| 4 | MOSI | input | SPI data in, with an internal pull-down resistor. |
| 5 | CS | input | SPI chip select, with an internal pull-up resistor. |
| 6 | B | output | Channel B; output of the incremental interface. |
| 7 | MISO | tri_state | SPI data out, with an internal pull-down resistor enabled at high impedance state. |
| 8 | GND | power_in | Supply ground. |
| 9 | /Z | output | Index pulse Z inverted; output of the incremental interface. |
| 10 | TEST | input | Test pin; connect to ground. |
| 11 | MGL | output | Digital output indicating field strength below MGLT level. |
| 12 | SCLK | input | SPI clock, with an internal pull-down resistor. |
| 13 | VDD | power_in | 3.3V supply (3.0V to 3.6V recommended operating range). |
| 14 | N/C | unconnected | No connection; leave unconnected. |
| 15 | /B | output | Channel B inverted; output of the incremental interface. |
| 16 | MGH | output | Digital output indicating field strength above MGHT level. |
| 17 | PAD | passive | Exposed pad; recommended to be connected to ground for optimum electrical, thermal and mechanical conditions. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Monolithic Power Systems |
| Package | QFN-16(3x3) |
| Category | Sensors |
| Pins | 17 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VDD | 3 | 3.3 | 3.6 | V | 4 | |
| Supply current | IDD | 10.2 | 11.7 | 13.8 | mA | 4 | |
| Operating temperature | Top | -40 | 125 | °C | 4 | ||
| Applied magnetic field | B | 30 | 60 | mT | 4 | ||
| Supply voltage (abs max) | -0.5 | 4.6 | V | 3 | |||
| Input pin voltage | VI | -0.5 | 6 | V | 3 | ||
| Output pin voltage | VO | -0.5 | 4.6 | V | 3 | ||
| Continuous power dissipation | 2 | W | TA = +25°C | 3 | |||
| Junction temperature | TJ | 125 | °C | 3 | |||
| Storage temperature | -65 | 150 | °C | 3 | |||
| Thermal resistance junction-ambient | θJA | 50 | °C/W | QFN-16 (3mmx3mm), JESD51-7 4-layer PCB | 3 | ||
| Thermal resistance junction-case | θJC | 12 | °C/W | QFN-16 (3mmx3mm), JESD51-7 4-layer PCB | 3 | ||
| Effective resolution | 8 | bits | 3σ deviation of the noise distribution | 5 | |||
| Noise rms | 0.005 | 0.01 | 0.02 | deg | 5 | ||
| Refresh rate | 850 | 980 | 1100 | kHz | 5 | ||
| Data output length | 8 | 8 | bits | 5 | |||
| Power-up time | 20 | ms | 5 | ||||
| INL at 25°C | 0.7 | deg | At room temperature over the full field range | 5 | |||
| INL between -40°C to +125°C | 1.1 | deg | Over the full temperature range and field range | 5 | |||
| Temperature induced drift at room temperature | 0.015 | 0.04 | deg/°C | 5 | |||
| Temperature induced variation 25°C to 85°C | 0.5 | 1.2 | deg | From 25°C to 85°C | 5 | ||
| Temperature induced variation 25°C to 125°C | 1 | 2.1 | deg | From 25°C to 125°C | 5 | ||
| Pulses per channel per turn | PPT+1 | 1 | 64 | Programmable | 5 | ||
| Resolution - edges per turn | 4 | 256 | Programmable | 5 | |||
| Systematic jitter | 6 | % | For PPT = 63, 0 - 100krpm | 5 | |||
| Random jitter (3σ) | 0.6 | % | For PPT = 63, 0 - 100krpm | 5 | |||
| Overall ABZ jitter | 0.4 | deg | 5 | ||||
| Input high voltage | VIH | 2.5 | 5.5 | V | 5 | ||
| Input low voltage | VIL | -0.3 | 0.8 | V | 5 | ||
| Pull-up resistor | RPU | 46 | 66 | 97 | kΩ | 5 | |
| Pull-down resistor | RPD | 43 | 55 | 97 | kΩ | 5 | |
| Rising edge slew rate | TR | 0.7 | V/ns | CL = 50pF | 6 | ||
| Falling edge slew rate | TF | 0.7 | V/ns | CL = 50pF | 6 | ||
| SCLK period | tsclk | 40 | ns | 12 | |||
| Idle time between two angle transmissions | tidleAngle | 150 | ns | 12 | |||
| Idle time before and after register readout | tidleReg | 750 | ns | 12 | |||
| NVM update idle time | tnvm | 20 | ms | 12 | |||
| CS falling to SCLK falling | tcsL | 80 | ns | 12 | |||
| SCLK low level | tsclkL | 20 | ns | 12 | |||
| SCLK high level | tsclkH | 20 | ns | 12 | |||
| SCLK rising to CS rising | tcsH | 25 | ns | 12 | |||
| SCLK setting edge to MISO valid | tMISO | 15 | ns | 12 | |||
| MOSI valid to SCLK reading edge | tMOSI | 15 | ns | 12 | |||
| Latency | 4 | ms | Constant speed propagation delay | 5 | |||
| Filter cutoff frequency | Fcutoff | 90 | Hz | 5 | |||
| Magnetic field detection hysteresis | MagHys | 6 | mT | 5 | |||
| Magnetic field detection threshold temperature drift | -600 | ppm/°C | 5 |
CAD (KiCad official)
- Symbol:
MA820GQ-Z - Footprint:
Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm - 3D model: QFN-16(3x3) (KiCad packages3D, STEP)
- 3D model files:
ma820gq-z-etched.step/ma820gq-z-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ma820gq-z.step/ma820gq-z.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Monolithic Power Systems datasheet (25 pp, sha256
f80463c32942632b, retrieved 2026-10-31, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).