main
Ray Publish 0.1.0 5a03c8a

M95M01-DFMN6TP

STMicroelectronics · EEPROM · SO-8

M95M01-DFMN6TP from STMicroelectronics, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 S input Chip Select: when high the device is deselected with Q at high impedance and in Standby Power mode, and driving it low selects the device and starts Active Power mode.
2 Q tri_state Serial Data Output: data is shifted out on the falling edge of Serial Clock (C) and the pin is high impedance when the device is deselected or in Hold condition.
3 W input Write Protect: freezes the size of the memory area protected by the BP1 and BP0 bits and must be driven high or low and be stable during all Write instructions.
4 VSS power_in Ground: the reference for all signals, including the VCC supply voltage.
5 D input Serial Data Input: receives instructions, addresses and data to be written, latched on the rising edge of Serial Clock (C).
6 C input Serial Clock: provides the timing of the serial interface, with a maximum clock frequency of 16 MHz at VCC of 4.5 V or more.
7 HOLD input Hold: pauses serial communication without deselecting the device, during which Q is high impedance and D and C are Don't Care.
8 VCC power_in Supply voltage of 1.7 V to 5.5 V for the M95M01-DF, which must be stable during operations and should be decoupled with 10 nF to 100 nF close to the VCC/VSS pins.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package SO-8
Category Memory
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage (operating, M95M01-DF) VCC 1.7 5.5 V 33
Ambient operating temperature (operating, device grade 6) TA -40 85 °C 33
Ambient operating temperature (absolute maximum) TAMB -40 130 °C 32
Storage temperature TSTG -65 150 °C 32
Input voltage VI -0.5 6.5 V 32
Supply voltage (absolute maximum) VCC -0.5 6.5 V 32
Output voltage (max printed as VCC+0.6 V) VO -0.5 V 32
DC output current (Q = 0) IOL 5 mA Q = 0 32
DC output current (Q = 1) IOH 5 mA Q = 1 32
Electrostatic discharge voltage (human body model) VESD 4000 V Human body model, AEC-Q100-002 32
Output capacitance (Q) COUT 8 pF VOUT = 0 V 34
Input capacitance (D) CIN 8 pF VIN = 0 V 34
Input capacitance (other pins) CIN 6 pF VIN = 0 V 34
Load capacitance (AC measurement) CL 100 pF 33
Write cycle endurance (TA ≤ 25 °C) Ncycle 4e+06 TA ≤ 25 °C, VCC(min) < VCC < VCC(max) 34
Write cycle endurance (TA = 85 °C) Ncycle 1.2e+06 TA = 85 °C, VCC(min) < VCC < VCC(max) 34
Data retention 200 year TA = 55 °C 34
Input leakage current ILI -2 2 µA VIN = VSS or VCC 35
Output leakage current ILO -2 2 µA S = VCC, VOUT = VSS or VCC 35
Supply current (Read) at 2 MHz, 1.8 V ICC 1.5 mA C = 0.1 VCC/0.9 VCC at 2 MHz, VCC = 1.8 V, Q = open 35
Supply current (Read) at 5 MHz, 1.8 V ICC 2 mA C = 0.1 VCC/0.9 VCC at 5 MHz, VCC = 1.8 V, Q = open 35
Supply current (Read) at 5 MHz, 2.5 V ICC 4 mA C = 0.1 VCC/0.9 VCC at 5 MHz, VCC = 2.5 V, Q = open 35
Supply current (Read) at 10 MHz, 2.5 V ICC 2 mA C = 0.1 VCC/0.9 VCC at 10 MHz, VCC = 2.5 V, Q = open 35
Supply current (Read) at 5 MHz, 5 V ICC 5 mA C = 0.1 VCC/0.9 VCC at 5 MHz, VCC = 5 V, Q = open 35
Supply current (Read) at 10 MHz, 5.5 V ICC 5 mA C = 0.1 VCC/0.9 VCC at 10 MHz, VCC = 5.5 V, Q = open 35
Supply current (Write) ICC0 5 mA During tW, S = VCC 35
Supply current (Standby Power mode) at 1.8 V ICC1 3 µA S = VCC, VIN = VSS or VCC, VCC = 1.8 V 35
Supply current (Standby Power mode) at 1.8 V, temp 25 °C or less ICC1 1 µA S = VCC, VIN = VSS or VCC, VCC = 1.8 V, temp = 25 °C (or less) 35
Supply current (Standby Power mode) at 2.5 V ICC1 3 µA S = VCC, VIN = VSS or VCC, VCC = 2.5 V 35
Supply current (Standby Power mode) at 2.5 V, temp 25 °C or less ICC1 1 µA S = VCC, VIN = VSS or VCC, VCC = 2.5 V, temp = 25 °C (or less) 35
Supply current (Standby Power mode) at 5.5 V ICC1 5 µA S = VCC, VIN = VSS or VCC, VCC = 5.5 V 35
Supply current (Standby Power mode) at 5.5 V, temp 25 °C or less ICC1 1.5 µA S = VCC, VIN = VSS or VCC, VCC = 5.5 V, temp = 25 °C (or less) 35
Input low voltage (max printed as 0.25 VCC) VIL -0.45 V 1.8 V ≤ VCC < 2.5 V 35
Input low voltage (max printed as 0.3 VCC) VIL -0.45 V 2.5 V ≤ VCC ≤ 5.5 V 35
Output low voltage VOL 0.3 V IOL = 0.15 mA, VCC = 1.8 V 35
Output low voltage VOL 0.4 V VCC = 2.5 V, IOL = 1.5 mA or VCC = 5 V, IOL = 2 mA 35
Clock frequency fC 2 MHz VCC ≥ 1.7 V 36
S active setup time tSLCH 150 ns VCC ≥ 1.7 V 36
S not active setup time tSHCH 150 ns VCC ≥ 1.7 V 36
S deselect time tSHSL 200 ns VCC ≥ 1.7 V 36
S active hold time tCHSH 150 ns VCC ≥ 1.7 V 36
S not active hold time tCHSL 150 ns VCC ≥ 1.7 V 36
Clock high time tCH 200 ns VCC ≥ 1.7 V 36
Clock low time tCL 200 ns VCC ≥ 1.7 V 36
Clock rise time tCLCH 2 µs VCC ≥ 1.7 V 36
Clock fall time tCHCL 2 µs VCC ≥ 1.7 V 36
Data in setup time tDVCH 50 ns VCC ≥ 1.7 V 36
Data in hold time tCHDX 50 ns VCC ≥ 1.7 V 36
Clock low hold time after HOLD not active tHHCH 150 ns VCC ≥ 1.7 V 36
Clock low hold time after HOLD active tHLCH 150 ns VCC ≥ 1.7 V 36
Clock low set-up time before HOLD active tCLHL 0 ns VCC ≥ 1.7 V 36
Clock low set-up time before HOLD not active tCLHH 0 ns VCC ≥ 1.7 V 36
Output disable time tSHQZ 200 ns VCC ≥ 1.7 V 36
Clock low to output valid tCLQV 200 ns VCC ≥ 1.7 V 36
Output hold time tCLQX 0 ns VCC ≥ 1.7 V 36
Output rise time tQLQH 200 ns VCC ≥ 1.7 V 36
Output fall time tQHQL 200 ns VCC ≥ 1.7 V 36
HOLD high to output valid tHHQV 200 ns VCC ≥ 1.7 V 36
HOLD low to output high-Z tHLQZ 200 ns VCC ≥ 1.7 V 36
Write time tW 5 ms VCC ≥ 1.7 V 36

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts tin TLEAD Lead temperature during soldering See note (1) 1. Compliant with JEDEC standard J-STD-020D (for small-body, Sn-Pb or Pb free assembly), the ST 32

CAD (KiCad official)

  • Symbol: M95M01-DFMN6TP
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SO-8 (KiCad packages3D, STEP)
  • 3D model files: m95m01-dfmn6tp-etched.step / m95m01-dfmn6tp-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); m95m01-dfmn6tp.step / m95m01-dfmn6tp.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (53 pp, sha256 323ad6b5a1d5fe41, retrieved 2026-11-10, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text+vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF