Generated by kicad-footprint-generator · KiCad file format 20260206
M95M01-DFMN6TP
STMicroelectronics · EEPROM · SO-8
M95M01-DFMN6TP from STMicroelectronics, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | S | input | Chip Select: when high the device is deselected with Q at high impedance and in Standby Power mode, and driving it low selects the device and starts Active Power mode. |
| 2 | Q | tri_state | Serial Data Output: data is shifted out on the falling edge of Serial Clock (C) and the pin is high impedance when the device is deselected or in Hold condition. |
| 3 | W | input | Write Protect: freezes the size of the memory area protected by the BP1 and BP0 bits and must be driven high or low and be stable during all Write instructions. |
| 4 | VSS | power_in | Ground: the reference for all signals, including the VCC supply voltage. |
| 5 | D | input | Serial Data Input: receives instructions, addresses and data to be written, latched on the rising edge of Serial Clock (C). |
| 6 | C | input | Serial Clock: provides the timing of the serial interface, with a maximum clock frequency of 16 MHz at VCC of 4.5 V or more. |
| 7 | HOLD | input | Hold: pauses serial communication without deselecting the device, during which Q is high impedance and D and C are Don't Care. |
| 8 | VCC | power_in | Supply voltage of 1.7 V to 5.5 V for the M95M01-DF, which must be stable during operations and should be decoupled with 10 nF to 100 nF close to the VCC/VSS pins. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SO-8 |
| Category | Memory |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (operating, M95M01-DF) | VCC | 1.7 | 5.5 | V | 33 | ||
| Ambient operating temperature (operating, device grade 6) | TA | -40 | 85 | °C | 33 | ||
| Ambient operating temperature (absolute maximum) | TAMB | -40 | 130 | °C | 32 | ||
| Storage temperature | TSTG | -65 | 150 | °C | 32 | ||
| Input voltage | VI | -0.5 | 6.5 | V | 32 | ||
| Supply voltage (absolute maximum) | VCC | -0.5 | 6.5 | V | 32 | ||
| Output voltage (max printed as VCC+0.6 V) | VO | -0.5 | V | 32 | |||
| DC output current (Q = 0) | IOL | 5 | mA | Q = 0 | 32 | ||
| DC output current (Q = 1) | IOH | 5 | mA | Q = 1 | 32 | ||
| Electrostatic discharge voltage (human body model) | VESD | 4000 | V | Human body model, AEC-Q100-002 | 32 | ||
| Output capacitance (Q) | COUT | 8 | pF | VOUT = 0 V | 34 | ||
| Input capacitance (D) | CIN | 8 | pF | VIN = 0 V | 34 | ||
| Input capacitance (other pins) | CIN | 6 | pF | VIN = 0 V | 34 | ||
| Load capacitance (AC measurement) | CL | 100 | pF | 33 | |||
| Write cycle endurance (TA ≤ 25 °C) | Ncycle | 4e+06 | TA ≤ 25 °C, VCC(min) < VCC < VCC(max) | 34 | |||
| Write cycle endurance (TA = 85 °C) | Ncycle | 1.2e+06 | TA = 85 °C, VCC(min) < VCC < VCC(max) | 34 | |||
| Data retention | 200 | year | TA = 55 °C | 34 | |||
| Input leakage current | ILI | -2 | 2 | µA | VIN = VSS or VCC | 35 | |
| Output leakage current | ILO | -2 | 2 | µA | S = VCC, VOUT = VSS or VCC | 35 | |
| Supply current (Read) at 2 MHz, 1.8 V | ICC | 1.5 | mA | C = 0.1 VCC/0.9 VCC at 2 MHz, VCC = 1.8 V, Q = open | 35 | ||
| Supply current (Read) at 5 MHz, 1.8 V | ICC | 2 | mA | C = 0.1 VCC/0.9 VCC at 5 MHz, VCC = 1.8 V, Q = open | 35 | ||
| Supply current (Read) at 5 MHz, 2.5 V | ICC | 4 | mA | C = 0.1 VCC/0.9 VCC at 5 MHz, VCC = 2.5 V, Q = open | 35 | ||
| Supply current (Read) at 10 MHz, 2.5 V | ICC | 2 | mA | C = 0.1 VCC/0.9 VCC at 10 MHz, VCC = 2.5 V, Q = open | 35 | ||
| Supply current (Read) at 5 MHz, 5 V | ICC | 5 | mA | C = 0.1 VCC/0.9 VCC at 5 MHz, VCC = 5 V, Q = open | 35 | ||
| Supply current (Read) at 10 MHz, 5.5 V | ICC | 5 | mA | C = 0.1 VCC/0.9 VCC at 10 MHz, VCC = 5.5 V, Q = open | 35 | ||
| Supply current (Write) | ICC0 | 5 | mA | During tW, S = VCC | 35 | ||
| Supply current (Standby Power mode) at 1.8 V | ICC1 | 3 | µA | S = VCC, VIN = VSS or VCC, VCC = 1.8 V | 35 | ||
| Supply current (Standby Power mode) at 1.8 V, temp 25 °C or less | ICC1 | 1 | µA | S = VCC, VIN = VSS or VCC, VCC = 1.8 V, temp = 25 °C (or less) | 35 | ||
| Supply current (Standby Power mode) at 2.5 V | ICC1 | 3 | µA | S = VCC, VIN = VSS or VCC, VCC = 2.5 V | 35 | ||
| Supply current (Standby Power mode) at 2.5 V, temp 25 °C or less | ICC1 | 1 | µA | S = VCC, VIN = VSS or VCC, VCC = 2.5 V, temp = 25 °C (or less) | 35 | ||
| Supply current (Standby Power mode) at 5.5 V | ICC1 | 5 | µA | S = VCC, VIN = VSS or VCC, VCC = 5.5 V | 35 | ||
| Supply current (Standby Power mode) at 5.5 V, temp 25 °C or less | ICC1 | 1.5 | µA | S = VCC, VIN = VSS or VCC, VCC = 5.5 V, temp = 25 °C (or less) | 35 | ||
| Input low voltage (max printed as 0.25 VCC) | VIL | -0.45 | V | 1.8 V ≤ VCC < 2.5 V | 35 | ||
| Input low voltage (max printed as 0.3 VCC) | VIL | -0.45 | V | 2.5 V ≤ VCC ≤ 5.5 V | 35 | ||
| Output low voltage | VOL | 0.3 | V | IOL = 0.15 mA, VCC = 1.8 V | 35 | ||
| Output low voltage | VOL | 0.4 | V | VCC = 2.5 V, IOL = 1.5 mA or VCC = 5 V, IOL = 2 mA | 35 | ||
| Clock frequency | fC | 2 | MHz | VCC ≥ 1.7 V | 36 | ||
| S active setup time | tSLCH | 150 | ns | VCC ≥ 1.7 V | 36 | ||
| S not active setup time | tSHCH | 150 | ns | VCC ≥ 1.7 V | 36 | ||
| S deselect time | tSHSL | 200 | ns | VCC ≥ 1.7 V | 36 | ||
| S active hold time | tCHSH | 150 | ns | VCC ≥ 1.7 V | 36 | ||
| S not active hold time | tCHSL | 150 | ns | VCC ≥ 1.7 V | 36 | ||
| Clock high time | tCH | 200 | ns | VCC ≥ 1.7 V | 36 | ||
| Clock low time | tCL | 200 | ns | VCC ≥ 1.7 V | 36 | ||
| Clock rise time | tCLCH | 2 | µs | VCC ≥ 1.7 V | 36 | ||
| Clock fall time | tCHCL | 2 | µs | VCC ≥ 1.7 V | 36 | ||
| Data in setup time | tDVCH | 50 | ns | VCC ≥ 1.7 V | 36 | ||
| Data in hold time | tCHDX | 50 | ns | VCC ≥ 1.7 V | 36 | ||
| Clock low hold time after HOLD not active | tHHCH | 150 | ns | VCC ≥ 1.7 V | 36 | ||
| Clock low hold time after HOLD active | tHLCH | 150 | ns | VCC ≥ 1.7 V | 36 | ||
| Clock low set-up time before HOLD active | tCLHL | 0 | ns | VCC ≥ 1.7 V | 36 | ||
| Clock low set-up time before HOLD not active | tCLHH | 0 | ns | VCC ≥ 1.7 V | 36 | ||
| Output disable time | tSHQZ | 200 | ns | VCC ≥ 1.7 V | 36 | ||
| Clock low to output valid | tCLQV | 200 | ns | VCC ≥ 1.7 V | 36 | ||
| Output hold time | tCLQX | 0 | ns | VCC ≥ 1.7 V | 36 | ||
| Output rise time | tQLQH | 200 | ns | VCC ≥ 1.7 V | 36 | ||
| Output fall time | tQHQL | 200 | ns | VCC ≥ 1.7 V | 36 | ||
| HOLD high to output valid | tHHQV | 200 | ns | VCC ≥ 1.7 V | 36 | ||
| HOLD low to output high-Z | tHLQZ | 200 | ns | VCC ≥ 1.7 V | 36 | ||
| Write time | tW | 5 | ms | VCC ≥ 1.7 V | 36 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | TLEAD Lead temperature during soldering See note (1) 1. Compliant with JEDEC standard J-STD-020D (for small-body, Sn-Pb or Pb free assembly), the ST | 32 |
CAD (KiCad official)
- Symbol:
M95M01-DFMN6TP - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SO-8 (KiCad packages3D, STEP)
- 3D model files:
m95m01-dfmn6tp-etched.step/m95m01-dfmn6tp-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);m95m01-dfmn6tp.step/m95m01-dfmn6tp.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (53 pp, sha256
323ad6b5a1d5fe41, retrieved 2026-11-10, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).