main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers m95160-drdw3tp: viewers rendered from the public page · Ray
m95160-drdw3tp-etched.glb Publish 0.1.0 · Ray
m95160-drdw3tp-etched.step m95160-drdw3tp: factory component page (tier=lcsc) · Ray
m95160-drdw3tp-hero.glb m95160-drdw3tp: hero GLB from the etched model (keeps the MPN mark) · Ray
m95160-drdw3tp-hero.overlay.json Publish 0.1.0 · Ray
m95160-drdw3tp.glb Publish 0.1.0 · Ray
m95160-drdw3tp.kicad_mod Publish 0.1.0 · Ray
m95160-drdw3tp.kicad_sym Publish 0.1.0 · Ray
m95160-drdw3tp.lbr Publish 0.1.0 · Ray
m95160-drdw3tp.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier lcsc, 8 pins · Ray

M95160-DRDW3TP

The maker sells this part only as M95160-DRDW3TP/K (ST ordering information scheme: "T = Tape and reel packing", "/K = Manufacturing technology code"; the bare code lacks the process letter (Table 19, p.40)). The DigiKey and Mouser numbers on this page are for M95160-DRDW3TP/K.

STMicroelectronics · EEPROM · TSSOP-8

M95160-DRDW3TP from STMicroelectronics, in a TSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 S input Chip Select, active low: driving it low selects the device and starts communication, driving it high deselects the device and puts Q in high impedance.
2 Q tri_state Serial Data output, shifts data out on the falling edge of C, MSB first, and is high impedance in all other cases.
3 W input Write Protect, active low, used to write-protect the Status Register.
4 VSS power_in Ground, the reference for all signals including the VCC supply voltage.
5 D input Serial Data input, receives instructions, addresses and data to be written, latched on the rising edge of C, MSB first.
6 C input Serial Clock, synchronizes the serial interface, with inputs latched on the rising edge and Q changing after the falling edge, up to 20 MHz for VCC ≥ 4.5 V.
7 HOLD input Hold, active low, pauses serial communication without deselecting the device or resetting the clocking sequence.
8 VCC power_in Supply voltage, 1.7 V to 5.5 V for voltage range R (up to 125 °C); decouple with 10 nF to 100 nF close to VCC/VSS.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package TSSOP-8
Category Memory
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Storage temperature TSTG -65 150 °C 28
Ambient operating temperature TAMR -40 150 °C 28
Voltage on Q pin VO -0.5 V max printed as VCC+0.6 V 28
Input voltage VI -0.5 6.5 V 28
DC output current (Q = 0) IOL 5 mA 28
DC output current (Q = 1) IOH 5 mA 28
Supply voltage VCC -0.5 6.5 V 28
Electrostatic pulse (Human Body Model) VESD 4000 V AEC-Q100-002, C1=100 pF, R1=1500 Ω, R2=500 Ω 28
Write cycle endurance Ncycle 4e+06 Write cycle TA ≤ 25 °C, 1.7 V < VCC < 5.5 V 29
Write cycle endurance Ncycle 1.2e+06 Write cycle TA = 85 °C, 1.7 V < VCC < 5.5 V 29
Write cycle endurance Ncycle 600000 Write cycle TA = 125 °C, 1.7 V < VCC < 5.5 V 29
Supply voltage VCC 1.7 5.5 V 29
Ambient operating temperature TA -40 125 °C 29
Operating clock frequency fC 10 MHz VCC ≥ 2.5 V, capacitive load on Q pin ≤100pF 29
Operating clock frequency fC 5 MHz VCC ≥ 1.7 V, capacitive load on Q pin ≤100pF 29
Output capacitance (Q) COUT 8 pF VOUT = 0 V 31
Input capacitance CIN 6 pF VIN = 0 V 31
Input leakage current ILI 2 µA VIN = VSS or VCC 31
Output leakage current ILO 3 µA S = VCC, VOUT = VSS or VCC 31
Supply current (Read) ICC 2 mA VCC = 1.7 V, C = 0.1 VCC/0.9 VCC, Q = open, fC = 5 MHz 31
Supply current (Read) ICC 5 mA VCC = 5.5 V, fC = 20 MHz, C = 0.1 VCC/0.9 VCC, Q = open; -40 °C < t° < 85 °C 31
Supply current (Write) ICC0 2 mA 1.7 V ≤ VCC < 5.5 V during tW, S = VCC; average value during write cycle 31
Supply current (Standby mode) ICC1 1 µA t° = 85 °C, VCC = 1.7 V, S = VCC, VIN = VSS or VCC 31
Supply current (Standby mode) ICC1 2 µA t° = 85 °C, VCC = 2.5 V, S = VCC, VIN = VSS or VCC 31
Supply current (Standby mode) ICC1 3 µA t° = 85 °C, VCC = 5.5 V, S = VCC, VIN = VSS or VCC 31
Supply current (Standby mode) ICC1 15 µA t° = 125 °C, VCC = 1.7 V, S = VCC, VIN = VSS or VCC 31
Supply current (Standby mode) ICC1 20 µA t° = 125 °C, VCC = 5.5 V, S = VCC, VIN = VSS or VCC 31
Input low voltage VIL -0.45 0.25 V 1.7 V ≤ VCC < 2.5 V; max printed as 0.25 VCC 31
Input low voltage VIL -0.45 0.3 V 2.5 V ≤ VCC < 5.5 V; max printed as 0.3 VCC 31
Input high voltage VIH 0.75 V 1.7 V ≤ VCC < 2.5 V; min printed as 0.75 VCC, max printed as VCC+1 31
Input high voltage VIH 0.7 V 2.5 V ≤ VCC < 5.5 V; min printed as 0.7 VCC, max printed as VCC+1 31
Output low voltage VOL 0.3 V VCC = 1.7 V, IOL = 1 mA 31
Output low voltage VOL 0.4 V VCC ≥ 2.5 V, IOL = 2 mA 31
Output high voltage VOH 0.8 V VCC = 1.7 V, IOH = 1 mA; min printed as 0.8 VCC 31
Internal reset threshold voltage VRES 0.5 1.5 V 31
Clock frequency fC 5 MHz Test conditions specified in Table 11 32
S active setup time tSLCH 60 ns Test conditions specified in Table 11 32
S not active setup time tSHCH 60 ns Test conditions specified in Table 11 32
S deselect time tSHSL 90 ns Test conditions specified in Table 11 32
S active hold time tCHSH 60 ns Test conditions specified in Table 11 32
S not active hold time tCHSL 60 ns Test conditions specified in Table 11 32
Clock high time tCH 80 ns Test conditions specified in Table 11 32
Clock low time tCL 80 ns Test conditions specified in Table 11 32
Clock rise time tCLCH 2 µs Test conditions specified in Table 11; value guaranteed by characterization 32
Clock fall time tCHCL 2 µs Test conditions specified in Table 11; value guaranteed by characterization 32
Data in setup time tDVCH 20 ns Test conditions specified in Table 11 32
Data in hold time tCHDX 20 ns Test conditions specified in Table 11 32
Clock low hold time after HOLD not active tHHCH 60 ns Test conditions specified in Table 11 32
Clock low hold time after HOLD active tHLCH 60 ns Test conditions specified in Table 11 32
Output disable time tSHQZ 80 ns Test conditions specified in Table 11; value guaranteed by characterization 32
Clock low to output valid tCLQV 80 ns Test conditions specified in Table 11 32
Output hold time tCLQX 0 ns Test conditions specified in Table 11 32
Output rise time tQLQH 20 ns Test conditions specified in Table 11; value guaranteed by characterization 32
Output fall time tQHQL 20 ns Test conditions specified in Table 11; value guaranteed by characterization 32
HOLD high to output valid tHHQV 80 ns Test conditions specified in Table 11 32
HOLD low to output high-Z tHLQZ 80 ns Test conditions specified in Table 11; value guaranteed by characterization 32
Write time tW 4 ms Test conditions specified in Table 11 32

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts tin TLEAD Lead temperature during soldering See note (1) 1. Compliant with JEDEC Std J-STD-020D (for small body, Sn-Pb or Pb-free assembly), the ST ECOPACK® 28

CAD (KiCad official)

  • Symbol: M95160-DRDW3TP
  • Footprint: Package_SO:TSSOP-8_4.4x3mm_P0.65mm
  • 3D model: TSSOP-8 (KiCad packages3D, STEP)
  • 3D model files: m95160-drdw3tp-etched.step / m95160-drdw3tp-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); m95160-drdw3tp.step / m95160-drdw3tp.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (43 pp, sha256 49916e39586de793, retrieved 2026-11-12, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF