main
Ray
Publish 0.1.0
53c26f5
M95160-DFMN6TP
STMicroelectronics · EEPROM · SO-8
M95160-DFMN6TP from STMicroelectronics, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | S | input | Chip Select (active low): when high the device is deselected, Q is high impedance and the device is in Standby Power mode (unless a Write cycle is in progress); driving it low selects the device and places it in Active Power mode. |
| 2 | Q | tri_state | Serial Data Output: transfers data serially out of the device on the falling edge of Serial Clock (C), and is high impedance when the device is deselected or in the Hold condition. |
| 3 | W | input | Write Protect (active low): freezes the size of the memory area protected against Write instructions as set by the BP1 and BP0 bits, must be driven high or low and be stable during all Write instructions. |
| 4 | VSS | power_in | Ground, the reference for all signals including the VCC supply voltage. |
| 5 | D | input | Serial Data Input: receives instructions, addresses and data to be written, with values latched on the rising edge of Serial Clock (C). |
| 6 | C | input | Serial Clock: provides the timing of the serial interface, with inputs latched on the rising edge and Q changing from the falling edge. |
| 7 | HOLD | input | Hold (active low): pauses serial communications without deselecting the device, during which Q is high impedance and D and C are Don't Care. |
| 8 | VCC | power_in | Supply voltage, which must be held stable within VCC(min) to VCC(max) (1.7 V to 5.5 V for M95160-DF) during all operations. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SO-8 |
| Category | Memory |
| Pins | 8 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | TLEAD Lead temperature during soldering See note (1) 1. Compliant with JEDEC standard J-STD-020D (for small-body, Sn-Pb or Pb free assembly), the ST | 31 |
CAD (KiCad official)
- Symbol:
M95160-DFMN6TP - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SO-8 (KiCad packages3D, STEP)
- 3D model files:
m95160-dfmn6tp-etched.step/m95160-dfmn6tp-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);m95160-dfmn6tp.step/m95160-dfmn6tp.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (53 pp, sha256
1152e09547a4df75, retrieved 2026-11-05, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# M95160-DFMN6TP
**STMicroelectronics** · EEPROM · SO-8
M95160-DFMN6TP from STMicroelectronics, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | S | input | Chip Select (active low): when high the device is deselected, Q is high impedance and the device is in Standby Power mode (unless a Write cycle is in progress); driving it low selects the device and places it in Active Power mode. |
| 2 | Q | tri_state | Serial Data Output: transfers data serially out of the device on the falling edge of Serial Clock (C), and is high impedance when the device is deselected or in the Hold condition. |
| 3 | W | input | Write Protect (active low): freezes the size of the memory area protected against Write instructions as set by the BP1 and BP0 bits, must be driven high or low and be stable during all Write instructions. |
| 4 | VSS | power_in | Ground, the reference for all signals including the VCC supply voltage. |
| 5 | D | input | Serial Data Input: receives instructions, addresses and data to be written, with values latched on the rising edge of Serial Clock (C). |
| 6 | C | input | Serial Clock: provides the timing of the serial interface, with inputs latched on the rising edge and Q changing from the falling edge. |
| 7 | HOLD | input | Hold (active low): pauses serial communications without deselecting the device, during which Q is high impedance and D and C are Don't Care. |
| 8 | VCC | power_in | Supply voltage, which must be held stable within VCC(min) to VCC(max) (1.7 V to 5.5 V for M95160-DF) during all operations. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SO-8 |
| Category | Memory |
| Pins | 8 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | | tin | TLEAD Lead temperature during soldering See note (1) 1. Compliant with JEDEC standard J-STD-020D (for small-body, Sn-Pb or Pb free assembly), the ST | 31 |
## CAD (KiCad official)
- Symbol: `M95160-DFMN6TP`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SO-8 (KiCad packages3D, STEP)
- 3D model files: `m95160-dfmn6tp-etched.step` / `m95160-dfmn6tp-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `m95160-dfmn6tp.step` / `m95160-dfmn6tp.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [STMicroelectronics datasheet](https://www.st.com/resource/en/datasheet/m95160-dfmn6tp.pdf) (53 pp, sha256 `1152e09547a4df75`, retrieved 2026-11-05, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text+vision), consensus `claude-opus-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/m95160-dfmn6tp-datasheet.pdf)