Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

M95160-DFMN6TP

STMicroelectronics · EEPROM · SO-8

M95160-DFMN6TP from STMicroelectronics, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 S input Chip Select (active low): when high the device is deselected, Q is high impedance and the device is in Standby Power mode (unless a Write cycle is in progress); driving it low selects the device and places it in Active Power mode.
2 Q tri_state Serial Data Output: transfers data serially out of the device on the falling edge of Serial Clock (C), and is high impedance when the device is deselected or in the Hold condition.
3 W input Write Protect (active low): freezes the size of the memory area protected against Write instructions as set by the BP1 and BP0 bits, must be driven high or low and be stable during all Write instructions.
4 VSS power_in Ground, the reference for all signals including the VCC supply voltage.
5 D input Serial Data Input: receives instructions, addresses and data to be written, with values latched on the rising edge of Serial Clock (C).
6 C input Serial Clock: provides the timing of the serial interface, with inputs latched on the rising edge and Q changing from the falling edge.
7 HOLD input Hold (active low): pauses serial communications without deselecting the device, during which Q is high impedance and D and C are Don't Care.
8 VCC power_in Supply voltage, which must be held stable within VCC(min) to VCC(max) (1.7 V to 5.5 V for M95160-DF) during all operations.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package SO-8
Category Memory
Pins 8

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts tin TLEAD Lead temperature during soldering See note (1) 1. Compliant with JEDEC standard J-STD-020D (for small-body, Sn-Pb or Pb free assembly), the ST 31

CAD (KiCad official)

  • Symbol: M95160-DFMN6TP
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SO-8 (KiCad packages3D, STEP)
  • 3D model files: m95160-dfmn6tp-etched.step / m95160-dfmn6tp-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); m95160-dfmn6tp.step / m95160-dfmn6tp.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (53 pp, sha256 1152e09547a4df75, retrieved 2026-11-05, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text+vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF