main
Ray
Initial commit: component/m95040-wdw6tp
643772d
M95040-WDW6TP
STMicroelectronics · EEPROM · TSSOP-8
M95040-WDW6TP from STMicroelectronics, in a TSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | S | input | Active-low Chip Select; high deselects the device and puts Q in high impedance (standby), low selects it, and a falling edge is required after power-up before any instruction. |
| 2 | Q | tri_state | Serial Data Output that shifts data out on the falling edge of C and is high impedance when S is high or during the Hold condition. |
| 3 | W | input | Active-low Write Protect; when held low, writes to the memory are disabled, and it must be driven high or low and not left floating. |
| 4 | VSS | power_in | Ground, the reference for the VCC supply voltage. |
| 5 | D | input | Serial Data Input that receives instructions, addresses and data to be written, latched on the rising edge of C. |
| 6 | C | input | Serial Clock input providing the timing of the serial interface, with inputs latched on the rising edge and Q changing after the falling edge. |
| 7 | HOLD | input | Active-low Hold input that pauses serial communication without deselecting the device, with Q in high impedance and D and C don't care during Hold. |
| 8 | VCC | power_in | Supply voltage of 2.5 V to 5.5 V for the M950x0-W, to be held stable and decoupled with about 10 nF to 100 nF close to the VCC/VSS pins. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | TSSOP-8 |
| Category | Memory |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
M95040-WDW6TP - Footprint:
Package_SO:TSSOP-8_3x3mm_P0.65mm - 3D model: TSSOP-8 (KiCad packages3D, STEP)
- 3D model files:
m95040-wdw6tp-etched.step/m95040-wdw6tp-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);m95040-wdw6tp.step/m95040-wdw6tp.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (46 pp, sha256
1b7ee07d5879b564, retrieved 2026-10-03, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# M95040-WDW6TP
**STMicroelectronics** · EEPROM · TSSOP-8
M95040-WDW6TP from STMicroelectronics, in a TSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | S | input | Active-low Chip Select; high deselects the device and puts Q in high impedance (standby), low selects it, and a falling edge is required after power-up before any instruction. |
| 2 | Q | tri_state | Serial Data Output that shifts data out on the falling edge of C and is high impedance when S is high or during the Hold condition. |
| 3 | W | input | Active-low Write Protect; when held low, writes to the memory are disabled, and it must be driven high or low and not left floating. |
| 4 | VSS | power_in | Ground, the reference for the VCC supply voltage. |
| 5 | D | input | Serial Data Input that receives instructions, addresses and data to be written, latched on the rising edge of C. |
| 6 | C | input | Serial Clock input providing the timing of the serial interface, with inputs latched on the rising edge and Q changing after the falling edge. |
| 7 | HOLD | input | Active-low Hold input that pauses serial communication without deselecting the device, with Q in high impedance and D and C don't care during Hold. |
| 8 | VCC | power_in | Supply voltage of 2.5 V to 5.5 V for the M950x0-W, to be held stable and decoupled with about 10 nF to 100 nF close to the VCC/VSS pins. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | TSSOP-8 |
| Category | Memory |
| Pins | 8 |
## CAD (KiCad official)
- Symbol: `M95040-WDW6TP`
- Footprint: `Package_SO:TSSOP-8_3x3mm_P0.65mm`
- 3D model: TSSOP-8 (KiCad packages3D, STEP)
- 3D model files: `m95040-wdw6tp-etched.step` / `m95040-wdw6tp-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `m95040-wdw6tp.step` / `m95040-wdw6tp.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588939240567029760) (46 pp, sha256 `1b7ee07d5879b564`, retrieved 2026-10-03, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text+vision), consensus `claude-opus-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/m95040-wdw6tp-datasheet.pdf)