main
Download ZIP Propose a change
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers m95040-wdw6tp: one-pass backfill (courtyard 21.24 -> 19.29 mm2 (margin 0.25, default), re-etched) · Ray
m95040-wdw6tp-etched.fit.json m95040-wdw6tp: one-pass backfill (courtyard 21.24 -> 19.29 mm2 (margin 0.25, default), re-etched) · Ray
m95040-wdw6tp-etched.glb m95040-wdw6tp: one-pass backfill (courtyard 21.24 -> 19.29 mm2 (margin 0.25, default), re-etched) · Ray
m95040-wdw6tp-etched.step m95040-wdw6tp: one-pass backfill (courtyard 21.24 -> 19.29 mm2 (margin 0.25, default), re-etched) · Ray
m95040-wdw6tp-hero.glb m95040-wdw6tp: one-pass backfill (courtyard 21.24 -> 19.29 mm2 (margin 0.25, default), re-etched) · Ray
m95040-wdw6tp-hero.overlay.json m95040-wdw6tp: one-pass backfill (courtyard 21.24 -> 19.29 mm2 (margin 0.25, default), re-etched) · Ray
m95040-wdw6tp.glb Publish 0.1.0 · Ray
m95040-wdw6tp.kicad_mod m95040-wdw6tp: one-pass backfill (courtyard 21.24 -> 19.29 mm2 (margin 0.25, default), re-etched) · Ray
m95040-wdw6tp.kicad_sym Publish 0.1.0 · Ray
m95040-wdw6tp.lbr m95040-wdw6tp: one-pass backfill (courtyard 21.24 -> 19.29 mm2 (margin 0.25, default), re-etched) · Ray
m95040-wdw6tp.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Initial commit: component/m95040-wdw6tp · Ray

M95040-WDW6TP

STMicroelectronics · EEPROM · TSSOP-8

M95040-WDW6TP from STMicroelectronics, in a TSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 S input Active-low Chip Select; high deselects the device and puts Q in high impedance (standby), low selects it, and a falling edge is required after power-up before any instruction.
2 Q tri_state Serial Data Output that shifts data out on the falling edge of C and is high impedance when S is high or during the Hold condition.
3 W input Active-low Write Protect; when held low, writes to the memory are disabled, and it must be driven high or low and not left floating.
4 VSS power_in Ground, the reference for the VCC supply voltage.
5 D input Serial Data Input that receives instructions, addresses and data to be written, latched on the rising edge of C.
6 C input Serial Clock input providing the timing of the serial interface, with inputs latched on the rising edge and Q changing after the falling edge.
7 HOLD input Active-low Hold input that pauses serial communication without deselecting the device, with Q in high impedance and D and C don't care during Hold.
8 VCC power_in Supply voltage of 2.5 V to 5.5 V for the M950x0-W, to be held stable and decoupled with about 10 nF to 100 nF close to the VCC/VSS pins.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package TSSOP-8
Category Memory
Pins 8

CAD (KiCad official)

  • Symbol: M95040-WDW6TP
  • Footprint: Package_SO:TSSOP-8_3x3mm_P0.65mm
  • 3D model: TSSOP-8 (KiCad packages3D, STEP)
  • 3D model files: m95040-wdw6tp-etched.step / m95040-wdw6tp-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); m95040-wdw6tp.step / m95040-wdw6tp.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (46 pp, sha256 1b7ee07d5879b564, retrieved 2026-10-03, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text+vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF