main
History Download
Ray Publish 0.1.0 bca4e11

M93C56-WDW6TP

STMicroelectronics · EEPROM · TSSOP-8

M93C56-WDW6TP from STMicroelectronics, in a TSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 S input Chip Select input; a rising edge with C held low starts each instruction, and S must be driven to VSS (pull-down recommended) during power-up.
2 C input Serial Clock input with a clock frequency of up to 2 MHz for the M93Cx6-W.
3 D input Serial Data input, sampled on the rising edge of Serial Clock C.
4 Q output Serial Data output that shifts out read data and gives READY/BUSY status (Q=0 busy, Q=1 ready) during write or erase cycles, and is high impedance when the device is not selected.
5 VSS power_in Ground.
6 ORG input Organization Select: x16 if unconnected or tied to VCC, x8 if tied to VSS, and it should be set to VSS or VCC in Standby to minimize current.
7 DU unconnected Don't Use, reserved for ST test sequences; may be left unconnected or connected to VCC or VSS.
8 VCC power_in Supply voltage of 2.5 V to 5.5 V for the M93Cx6-W, to be decoupled with about 10 nF to 100 nF close to the pins.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package TSSOP-8
Category Memory
Pins 8

CAD (KiCad official)

  • Symbol: M93C56-WDW6TP
  • Footprint: Package_SO:TSSOP-8_4.4x3mm_P0.65mm
  • 3D model: TSSOP-8 (KiCad packages3D, STEP)
  • 3D model files: m93c56-wdw6tp-etched.step / m93c56-wdw6tp-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); m93c56-wdw6tp.step / m93c56-wdw6tp.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (35 pp, sha256 7b1f76e6c602697a, retrieved 2026-10-23, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text+vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF