3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownM93C56-WDW6TP
STMicroelectronics · EEPROM · TSSOP-8
M93C56-WDW6TP from STMicroelectronics, in a TSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | S | input | Chip Select input; a rising edge with C held low starts each instruction, and S must be driven to VSS (pull-down recommended) during power-up. |
| 2 | C | input | Serial Clock input with a clock frequency of up to 2 MHz for the M93Cx6-W. |
| 3 | D | input | Serial Data input, sampled on the rising edge of Serial Clock C. |
| 4 | Q | output | Serial Data output that shifts out read data and gives READY/BUSY status (Q=0 busy, Q=1 ready) during write or erase cycles, and is high impedance when the device is not selected. |
| 5 | VSS | power_in | Ground. |
| 6 | ORG | input | Organization Select: x16 if unconnected or tied to VCC, x8 if tied to VSS, and it should be set to VSS or VCC in Standby to minimize current. |
| 7 | DU | unconnected | Don't Use, reserved for ST test sequences; may be left unconnected or connected to VCC or VSS. |
| 8 | VCC | power_in | Supply voltage of 2.5 V to 5.5 V for the M93Cx6-W, to be decoupled with about 10 nF to 100 nF close to the pins. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | TSSOP-8 |
| Category | Memory |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
M93C56-WDW6TP - Footprint:
Package_SO:TSSOP-8_4.4x3mm_P0.65mm - 3D model: TSSOP-8 (KiCad packages3D, STEP)
- 3D model files:
m93c56-wdw6tp-etched.step/m93c56-wdw6tp-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);m93c56-wdw6tp.step/m93c56-wdw6tp.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (35 pp, sha256
7b1f76e6c602697a, retrieved 2026-10-23, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).