main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers m25p20-vmn6tpb: viewers · Ray
m25p20-vmn6tpb-etched.glb Publish 0.1.0 · Ray
m25p20-vmn6tpb-etched.step m25p20-vmn6tpb: factory component page (tier=lcsc) · Ray
m25p20-vmn6tpb-hero.glb m25p20-vmn6tpb: hero GLB from the etched model (keeps the MPN mark) · Ray
m25p20-vmn6tpb-hero.overlay.json Publish 0.1.0 · Ray
m25p20-vmn6tpb.glb Publish 0.1.0 · Ray
m25p20-vmn6tpb.kicad_mod Publish 0.1.0 · Ray
m25p20-vmn6tpb.kicad_sym Publish 0.1.0 · Ray
m25p20-vmn6tpb.lbr Publish 0.1.0 · Ray
m25p20-vmn6tpb.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier lcsc, 8 pins · Ray

M25P20-VMN6TPB

Micron Tech · NOR FLASH · SO-8

M25P20-VMN6TPB from Micron Tech, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 S# input Chip select: when HIGH the device is deselected and DQ1 is high-impedance, and a falling edge on S# is required before any command after power-up (page 8).
2 DQ1 bidirectional Serial data output, shifting data out on the falling edge of C; it is high-impedance when S# is HIGH or during a hold condition (page 8).
3 W# input Write protect: freezes the size of the memory area protected against WRITE, PROGRAM and ERASE as set by the block protect bits in the status register (page 8).
4 VSS power_in Ground: reference for the VCC supply voltage (page 8).
5 DQ0 bidirectional Serial data input: commands, addresses and program data are latched on the rising edge of C (page 8).
6 C input Serial clock: provides the timing of the serial interface, with maximum clock frequency of 75 MHz on VCC 2.7V-3.6V (pages 6 and 8).
7 HOLD# input Hold: pauses serial communication without deselecting the device, with DQ1 high-impedance and DQ0 and C treated as don't care; the device must be selected with S# LOW to start a hold (page 8).
8 VCC power_in Device core power supply; operating voltage is 2.3V to 3.6V for this part (page 8 and page 44).

Key specifications

Parameter Value
Manufacturer Micron Tech
Package SO-8
Category Memory
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input leakage current ILI -2 2 µA 36
Output leakage current ILO -2 2 µA 36
Standby current ICC1 50 µA S# = VCC, VIN = VSS or VCC 36
Deep power-down current ICC2 5 µA S# = VCC, VIN = VSS or VCC 36
Operating current (READ) ICC3 8 mA C = 0.1VCC / 0.9VCC at 40 MHz and 75 MHz, DQ1 = open 36
Operating current (READ) ICC3 4 mA C = 0.1VCC / 0.9VCC at 20 MHz, DQ1 = open 36
Operating current (PAGE PROGRAM) ICC4 15 mA S# = VCC 36
Operating current (WRITE STATUS REGISTER) ICC5 15 mA S# = VCC 36
Operating current (SECTOR ERASE) ICC6 15 mA S# = VCC 36
Operating current (BULK ERASE) ICC7 15 mA S# = VCC 36
Input LOW voltage VIL -0.5 V 36
Output LOW voltage VOL 0.4 V IOL = 1.6mA 37
WRITE STATUS REGISTER cycle time tW 1.3 15 ms Device grade 6 37
PAGE PROGRAM cycle time (256 bytes) tPP 0.8 5 ms Device grade 6, 256 bytes 37
SECTOR ERASE cycle time tSE 0.6 3 s Device grade 6 37
BULK ERASE cycle time tBE 2.5 6 s Device grade 6 37
VCC(min) to S# LOW tVSL 10 µs Device grade 6 34
Time delay to write instruction tPUW 1 10 ms Device grade 6 34
Write Inhibit voltage VWI 1 2.1 V Device grade 6 34
Supply voltage (operating) VCC 2.3 3.6 V 35
Ambient operating temperature (grade 6) TA -40 85 °C Grade 6 35
Storage temperature TSTG -65 150 °C 35
Input and output voltage (with respect to ground) VIO -0.6 V 35
Supply voltage VCC -0.6 4 V 35
Electrostatic discharge voltage (Human Body model) VESD -2000 2000 V JEDEC JESD22-A114A 35
Program/Erase cycles 100000 cycles Cycles per sector, grade 6 35
Data retention 20 years At 55°C 35
Output capacitance (DQ1) COUT 8 pF VOUT = 0 V 38
Input capacitance (other pins) CIN 6 pF VIN = 0 V 38
Load capacitance CL 30 30 pF AC measurement conditions 38
Input rise and fall times 5 ns AC measurement conditions 38
Clock frequency for all commands (except READ) fC 75 MHz VCCmin = 2.7V 39
Clock frequency for READ command fR 33 MHz VCCmin = 2.7V 39
Clock HIGH time tCH 6 ns VCCmin = 2.7V 39
Clock LOW time tCL 6 ns VCCmin = 2.7V 39
Clock rise time (peak-to-peak) tCLCH 0.1 V/ns VCCmin = 2.7V 39
Clock fall time (peak-to-peak) tCHCL 0.1 V/ns VCCmin = 2.7V 39
S# active setup time (relative to C) tSLCH 5 ns VCCmin = 2.7V 39
S# not active hold time (relative to C) tCHSL 5 ns VCCmin = 2.7V 39
Data In setup time tDVCH 2 ns VCCmin = 2.7V 39
Data In hold time tCHDX 5 ns VCCmin = 2.7V 39
S# active hold time (relative to C) tCHSH 5 ns VCCmin = 2.7V 39
S# not active setup time (relative to C) tSHCH 5 ns VCCmin = 2.7V 39
S# deselect time tSHSL 100 ns VCCmin = 2.7V 39
Output disable time tSHQZ 8 ns VCCmin = 2.7V 39
Output hold time tCLQX 0 ns VCCmin = 2.7V 39
HOLD# setup time (relative to C) tHLCH 5 ns VCCmin = 2.7V 39
HOLD# hold time (relative to C) tCHHH 5 ns VCCmin = 2.7V 39
HOLD# to output Low-Z tHHQX 8 ns VCCmin = 2.7V 39
HOLD# to output High-Z tHLQZ 8 ns VCCmin = 2.7V 39
WRITE PROTECT setup time tWHSL 20 ns VCCmin = 2.7V 39
WRITE PROTECT hold time tSHWL 100 ns VCCmin = 2.7V 39
S# HIGH to deep power-down mode tDP 3 µs VCCmin = 2.7V 39
S# HIGH to STANDBY without READ ELECTRONIC SIGNATURE tRES1 30 µs VCCmin = 2.7V 39
S# HIGH to STANDBY with READ ELECTRONIC SIGNATURE tRES2 30 µs VCCmin = 2.7V 39

CAD (KiCad official)

  • Symbol: M25P20-VMN6TPB
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SO-8 (KiCad packages3D, STEP)
  • 3D model files: m25p20-vmn6tpb-etched.step / m25p20-vmn6tpb-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); m25p20-vmn6tpb.step / m25p20-vmn6tpb.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Micron Tech datasheet (46 pp, sha256 1b298df2f2fdd036, retrieved 2026-10-30, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF