main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers m25p16-vmn6tp: viewers · Ray
m25p16-vmn6tp-etched.glb Publish 0.1.0 · Ray
m25p16-vmn6tp-etched.step m25p16-vmn6tp: factory component page (tier=lcsc) · Ray
m25p16-vmn6tp-hero.glb m25p16-vmn6tp: hero GLB from the etched model (keeps the MPN mark) · Ray
m25p16-vmn6tp-hero.overlay.json Publish 0.1.0 · Ray
m25p16-vmn6tp.glb Publish 0.1.0 · Ray
m25p16-vmn6tp.kicad_mod Publish 0.1.0 · Ray
m25p16-vmn6tp.kicad_sym Publish 0.1.0 · Ray
m25p16-vmn6tp.lbr Publish 0.1.0 · Ray
m25p16-vmn6tp.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray

M25P16-VMN6TP

Micron Tech · NOR FLASH · SOIC-8-150mil

M25P16-VMN6TP from Micron Tech, in a SOIC-8-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 S# input Chip select: when HIGH the device is deselected and DQ1 is high impedance (standby unless a program/erase/WRSR cycle is in progress); driving LOW enables the device, and a falling edge is required after power-up before any command.
2 DQ1 output Serial data output: transfers data serially out of the device, shifted out on the falling edge of serial clock C.
3 W# input Write protect: freezes the size of the memory area protected against program or erase as set by the BP2, BP1, BP0 bits of the Status Register.
4 VSS power_in Ground: reference for the VCC supply voltage.
5 DQ0 input Serial data input: receives commands, addresses and data to be programmed, latched on the rising edge of serial clock C.
6 C input Serial clock: provides the timing of the serial interface; inputs are latched on the rising edge and DQ1 changes after the falling edge, up to 75 MHz (33 MHz for READ).
7 HOLD# input Hold: pauses serial communication without deselecting the device; during hold DQ1 is High-Z and DQ0 and C are don't care, and the device must be selected (S# LOW) to start the hold condition.
8 VCC power_in Device core power supply, 2.7V to 3.6V.

Key specifications

Parameter Value
Manufacturer Micron Tech
Package SOIC-8-150mil
Category Memory
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VCC 2.7 3.6 V 37
Ambient operating temperature (grade 6) TA -40 85 °C grade 6 37
Storage temperature TSTG -65 150 °C 37
Supply voltage VCC -0.6 4 V 37
Input and output voltage (minimum) VIO -0.6 V with respect to ground; max is VCC+0.6 37
Electrostatic discharge voltage (HBM) VESD -2000 2000 V Human Body model 37
Input leakage current ILI -2 2 µA 38
Output leakage current ILO -2 2 µA 38
Standby current (grade 6) ICC1 50 µA S# = VCC, VIN = VSS or VCC 38
Deep power-down current (grade 6) ICC2 10 µA S# = VCC, VIN = VSS or VCC 38
Operating current (READ) 75MHz ICC3 8 mA C = 0.1VCC / 0.9VCC at 75MHz, DQ1 = open 38
Operating current (READ) 33MHz ICC3 4 mA C = 0.1VCC / 0.9VCC at 33MHz, DQ1 = open 38
Operating current (PAGE PROGRAM) ICC4 15 mA S# = VCC 38
Operating current (WRITE STATUS REGISTER) ICC5 15 mA S# = VCC 38
Operating current (SECTOR ERASE) ICC6 15 mA S# = VCC 38
Operating current (BULK ERASE) ICC7 15 mA S# = VCC 38
Input LOW voltage (minimum) VIL -0.5 V 38
Input LOW voltage (maximum, multiple of VCC) VIL 0.3 VCC max printed as 0.3VCC 38
Input HIGH voltage (minimum, multiple of VCC) VIH 0.7 VCC min printed as 0.7VCC 38
Output LOW voltage VOL 0.4 V IOL = 1.6mA 38
Output capacitance (DQ1) COUT 8 pF VOUT = 0 V 39
Input capacitance (other pins) CIN 6 pF VIN = 0 V 39
VCC(min) to S# LOW tVSL 30 μs 36
Time delay to write instruction tPUW 1 10 ms 36
Write Inhibit voltage VWI 1 2.1 V 36
Clock frequency for all commands (except READ) fC 75 MHz 41
Clock frequency for READ command fR 33 MHz 41
Clock HIGH time tCH 6 ns 41
Clock LOW time tCL 6 ns 41
Clock rise time (peak to peak) tCLCH 0.1 V/ns 41
Clock fall time (peak to peak) tCHCL 0.1 V/ns 41
S# active setup time (relative to C) tSLCH 5 ns 41
S# not active hold time (relative to C) tCHSL 5 ns 41
Data In setup time tDVCH 2 ns 41
Data In hold time tCHDX 5 ns 41
S# active hold time (relative to C) tCHSH 5 ns 41
S# not active setup time (relative to C) tSHCH 5 ns 41
S# deselect time tSHSL 100 ns 41
Output disable time tSHQZ 8 ns 41
Clock LOW to output valid (30 pF) tCLQV 8 ns under 30 pF 41
Clock LOW to output valid (10 pF) tCLQV 6 ns under 10 pF 41
Output hold time tCLQX 0 ns 41
HOLD# setup time (relative to C) tHLCH 5 ns 41
HOLD# hold time (relative to C) tCHHH 5 ns 41
HOLD# to output LOW-Z tHHQX 8 ns 41
HOLD# to output HIGH-Z tHLQZ 8 ns 41
WRITE PROTECT setup time tWHSL 20 ns 41
WRITE PROTECT hold time tSHWL 100 ns 41
S# HIGH to DEEP POWER-DOWN mode tDP 3 μs 41
S# HIGH to STANDBY without READ ELECTRONIC SIGNATURE tRES1 30 μs 41
S# HIGH to STANDBY with READ ELECTRONIC SIGNATURE tRES2 30 μs 41
WRITE STATUS REGISTER cycle time tW 1.3 15 ms typical at TA = 25 °C 42
PAGE PROGRAM cycle time (256 bytes) tPP 0.64 5 ms typical at TA = 25 °C 42
SECTOR ERASE cycle time tSE 0.6 3 s typical at TA = 25 °C 42
BULK ERASE cycle time tBE 13 40 s typical at TA = 25 °C 42

CAD (KiCad official)

  • Symbol: M25P16-VMN6TP
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8-150mil (KiCad packages3D, STEP)
  • 3D model files: m25p16-vmn6tp-etched.step / m25p16-vmn6tp-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); m25p16-vmn6tp.step / m25p16-vmn6tp.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Micron Tech datasheet (55 pp, sha256 cd877ba6bf01c2d7, retrieved 2026-10-22, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF