3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownM25P16-VMN6TP
Micron Tech · NOR FLASH · SOIC-8-150mil
M25P16-VMN6TP from Micron Tech, in a SOIC-8-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | S# | input | Chip select: when HIGH the device is deselected and DQ1 is high impedance (standby unless a program/erase/WRSR cycle is in progress); driving LOW enables the device, and a falling edge is required after power-up before any command. |
| 2 | DQ1 | output | Serial data output: transfers data serially out of the device, shifted out on the falling edge of serial clock C. |
| 3 | W# | input | Write protect: freezes the size of the memory area protected against program or erase as set by the BP2, BP1, BP0 bits of the Status Register. |
| 4 | VSS | power_in | Ground: reference for the VCC supply voltage. |
| 5 | DQ0 | input | Serial data input: receives commands, addresses and data to be programmed, latched on the rising edge of serial clock C. |
| 6 | C | input | Serial clock: provides the timing of the serial interface; inputs are latched on the rising edge and DQ1 changes after the falling edge, up to 75 MHz (33 MHz for READ). |
| 7 | HOLD# | input | Hold: pauses serial communication without deselecting the device; during hold DQ1 is High-Z and DQ0 and C are don't care, and the device must be selected (S# LOW) to start the hold condition. |
| 8 | VCC | power_in | Device core power supply, 2.7V to 3.6V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Micron Tech |
| Package | SOIC-8-150mil |
| Category | Memory |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | 2.7 | 3.6 | V | 37 | ||
| Ambient operating temperature (grade 6) | TA | -40 | 85 | °C | grade 6 | 37 | |
| Storage temperature | TSTG | -65 | 150 | °C | 37 | ||
| Supply voltage | VCC | -0.6 | 4 | V | 37 | ||
| Input and output voltage (minimum) | VIO | -0.6 | V | with respect to ground; max is VCC+0.6 | 37 | ||
| Electrostatic discharge voltage (HBM) | VESD | -2000 | 2000 | V | Human Body model | 37 | |
| Input leakage current | ILI | -2 | 2 | µA | 38 | ||
| Output leakage current | ILO | -2 | 2 | µA | 38 | ||
| Standby current (grade 6) | ICC1 | 50 | µA | S# = VCC, VIN = VSS or VCC | 38 | ||
| Deep power-down current (grade 6) | ICC2 | 10 | µA | S# = VCC, VIN = VSS or VCC | 38 | ||
| Operating current (READ) 75MHz | ICC3 | 8 | mA | C = 0.1VCC / 0.9VCC at 75MHz, DQ1 = open | 38 | ||
| Operating current (READ) 33MHz | ICC3 | 4 | mA | C = 0.1VCC / 0.9VCC at 33MHz, DQ1 = open | 38 | ||
| Operating current (PAGE PROGRAM) | ICC4 | 15 | mA | S# = VCC | 38 | ||
| Operating current (WRITE STATUS REGISTER) | ICC5 | 15 | mA | S# = VCC | 38 | ||
| Operating current (SECTOR ERASE) | ICC6 | 15 | mA | S# = VCC | 38 | ||
| Operating current (BULK ERASE) | ICC7 | 15 | mA | S# = VCC | 38 | ||
| Input LOW voltage (minimum) | VIL | -0.5 | V | 38 | |||
| Input LOW voltage (maximum, multiple of VCC) | VIL | 0.3 | VCC | max printed as 0.3VCC | 38 | ||
| Input HIGH voltage (minimum, multiple of VCC) | VIH | 0.7 | VCC | min printed as 0.7VCC | 38 | ||
| Output LOW voltage | VOL | 0.4 | V | IOL = 1.6mA | 38 | ||
| Output capacitance (DQ1) | COUT | 8 | pF | VOUT = 0 V | 39 | ||
| Input capacitance (other pins) | CIN | 6 | pF | VIN = 0 V | 39 | ||
| VCC(min) to S# LOW | tVSL | 30 | μs | 36 | |||
| Time delay to write instruction | tPUW | 1 | 10 | ms | 36 | ||
| Write Inhibit voltage | VWI | 1 | 2.1 | V | 36 | ||
| Clock frequency for all commands (except READ) | fC | 75 | MHz | 41 | |||
| Clock frequency for READ command | fR | 33 | MHz | 41 | |||
| Clock HIGH time | tCH | 6 | ns | 41 | |||
| Clock LOW time | tCL | 6 | ns | 41 | |||
| Clock rise time (peak to peak) | tCLCH | 0.1 | V/ns | 41 | |||
| Clock fall time (peak to peak) | tCHCL | 0.1 | V/ns | 41 | |||
| S# active setup time (relative to C) | tSLCH | 5 | ns | 41 | |||
| S# not active hold time (relative to C) | tCHSL | 5 | ns | 41 | |||
| Data In setup time | tDVCH | 2 | ns | 41 | |||
| Data In hold time | tCHDX | 5 | ns | 41 | |||
| S# active hold time (relative to C) | tCHSH | 5 | ns | 41 | |||
| S# not active setup time (relative to C) | tSHCH | 5 | ns | 41 | |||
| S# deselect time | tSHSL | 100 | ns | 41 | |||
| Output disable time | tSHQZ | 8 | ns | 41 | |||
| Clock LOW to output valid (30 pF) | tCLQV | 8 | ns | under 30 pF | 41 | ||
| Clock LOW to output valid (10 pF) | tCLQV | 6 | ns | under 10 pF | 41 | ||
| Output hold time | tCLQX | 0 | ns | 41 | |||
| HOLD# setup time (relative to C) | tHLCH | 5 | ns | 41 | |||
| HOLD# hold time (relative to C) | tCHHH | 5 | ns | 41 | |||
| HOLD# to output LOW-Z | tHHQX | 8 | ns | 41 | |||
| HOLD# to output HIGH-Z | tHLQZ | 8 | ns | 41 | |||
| WRITE PROTECT setup time | tWHSL | 20 | ns | 41 | |||
| WRITE PROTECT hold time | tSHWL | 100 | ns | 41 | |||
| S# HIGH to DEEP POWER-DOWN mode | tDP | 3 | μs | 41 | |||
| S# HIGH to STANDBY without READ ELECTRONIC SIGNATURE | tRES1 | 30 | μs | 41 | |||
| S# HIGH to STANDBY with READ ELECTRONIC SIGNATURE | tRES2 | 30 | μs | 41 | |||
| WRITE STATUS REGISTER cycle time | tW | 1.3 | 15 | ms | typical at TA = 25 °C | 42 | |
| PAGE PROGRAM cycle time (256 bytes) | tPP | 0.64 | 5 | ms | typical at TA = 25 °C | 42 | |
| SECTOR ERASE cycle time | tSE | 0.6 | 3 | s | typical at TA = 25 °C | 42 | |
| BULK ERASE cycle time | tBE | 13 | 40 | s | typical at TA = 25 °C | 42 |
CAD (KiCad official)
- Symbol:
M25P16-VMN6TP - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8-150mil (KiCad packages3D, STEP)
- 3D model files:
m25p16-vmn6tp-etched.step/m25p16-vmn6tp-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);m25p16-vmn6tp.step/m25p16-vmn6tp.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Micron Tech datasheet (55 pp, sha256
cd877ba6bf01c2d7, retrieved 2026-10-22, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).