main
Ray
pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left)
64c24ef
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275
{
"schema": "adom.pads/1",
"slug": "m24c64-rmn6tp",
"footprint": "SOIC-8_3.9x4.9mm_P1.27mm",
"generated_from": {
"footprint": "SOIC-8_3.9x4.9mm_P1.27mm@sha256:074ecb2092b24fa4",
"pins": "page.json:component.pins",
"overrides": null
},
"pin1": {
"pad": "1",
"at": [
-2.475,
-1.905
],
"corner": "top-left",
"source": "silk-marker",
"derived_from": "SOIC-8_3.9x4.9mm_P1.27mm@sha256:074ecb2092b24fa4"
},
"pad_count": 8,
"symbol_pins": [
"1",
"2",
"3",
"4",
"5",
"6",
"7",
"8"
],
"paste_apertures": 0,
"issues": [],
"pads": [
{
"pad": "1",
"kind": "smd",
"shape": "roundrect",
"at": [
-2.475,
-1.905
],
"rot": 0.0,
"size": [
1.95,
0.6
],
"layers": [
"F.Cu",
"F.Mask",
"F.Paste"
],
"thermal": false,
"pin": "1",
"name": "E0",
"type": "input",
"description": "Chip Enable address input bit 0. Sets bit b1 of the 7-bit I2C device select code, allowing up to 8 M24C64 devices to share a bus. Must be tied to VCC or VSS; if left floating, reads as 0.",
"is_pin1": true,
"source": {
"geometry": "SOIC-8_3.9x4.9mm_P1.27mm.kicad_mod",
"meaning": "page.json:component.pins",
"correspondence": "kicad: symbol pin number == pad name"
}
},
{
"pad": "2",
"kind": "smd",
"shape": "roundrect",
"at": [
-2.475,
-0.635
],
"rot": 0.0,
"size": [
1.95,
0.6
],
"layers": [
"F.Cu",
"F.Mask",
"F.Paste"
],
"thermal": false,
"pin": "2",
"name": "E1",
"type": "input",
"description": "Chip Enable address input bit 1. Sets bit b2 of the 7-bit I2C device select code. Must be tied to VCC or VSS; if left floating, reads as 0.",
"is_pin1": false,
"source": {
"geometry": "SOIC-8_3.9x4.9mm_P1.27mm.kicad_mod",
"meaning": "page.json:component.pins",
"correspondence": "kicad: symbol pin number == pad name"
}
},
{
"pad": "3",
"kind": "smd",
"shape": "roundrect",
"at": [
-2.475,
0.635
],
"rot": 0.0,
"size": [
1.95,
0.6
],
"layers": [
"F.Cu",
"F.Mask",
"F.Paste"
],
"thermal": false,
"pin": "3",
"name": "E2",
"type": "input",
"description": "Chip Enable address input bit 2. Sets bit b3 of the 7-bit I2C device select code. Must be tied to VCC or VSS; if left floating, reads as 0.",
"is_pin1": false,
"source": {
"geometry": "SOIC-8_3.9x4.9mm_P1.27mm.kicad_mod",
"meaning": "page.json:component.pins",
"correspondence": "kicad: symbol pin number == pad name"
}
},
{
"pad": "4",
"kind": "smd",
"shape": "roundrect",
"at": [
-2.475,
1.905
],
"rot": 0.0,
"size": [
1.95,
0.6
],
"layers": [
"F.Cu",
"F.Mask",
"F.Paste"
],
"thermal": false,
"pin": "4",
"name": "VSS",
"type": "power_in",
"description": "Ground reference for VCC supply.",
"is_pin1": false,
"source": {
"geometry": "SOIC-8_3.9x4.9mm_P1.27mm.kicad_mod",
"meaning": "page.json:component.pins",
"correspondence": "kicad: symbol pin number == pad name"
}
},
{
"pad": "5",
"kind": "smd",
"shape": "roundrect",
"at": [
2.475,
1.905
],
"rot": 0.0,
"size": [
1.95,
0.6
],
"layers": [
"F.Cu",
"F.Mask",
"F.Paste"
],
"thermal": false,
"pin": "5",
"name": "SDA",
"type": "bidirectional",
"description": "Serial Data input/output for the I2C bus. Open-drain output that must be pulled up to VCC through a resistor (value calculated per bus capacitance and speed). Used to transfer address, data-in, and data-out.",
"is_pin1": false,
"source": {
"geometry": "SOIC-8_3.9x4.9mm_P1.27mm.kicad_mod",
"meaning": "page.json:component.pins",
"correspondence": "kicad: symbol pin number == pad name"
}
},
{
"pad": "6",
"kind": "smd",
"shape": "roundrect",
"at": [
2.475,
0.635
],
"rot": 0.0,
"size": [
1.95,
0.6
],
"layers": [
"F.Cu",
"F.Mask",
"F.Paste"
],
"thermal": false,
"pin": "6",
"name": "SCL",
"type": "input",
"description": "Serial Clock input for the I2C bus. Strobes data on SDA(in) and clocks out data on SDA(out). Supports 100 kHz, 400 kHz, and 1 MHz I2C bus modes.",
"is_pin1": false,
"source": {
"geometry": "SOIC-8_3.9x4.9mm_P1.27mm.kicad_mod",
"meaning": "page.json:component.pins",
"correspondence": "kicad: symbol pin number == pad name"
}
},
{
"pad": "7",
"kind": "smd",
"shape": "roundrect",
"at": [
2.475,
-0.635
],
"rot": 0.0,
"size": [
1.95,
0.6
],
"layers": [
"F.Cu",
"F.Mask",
"F.Paste"
],
"thermal": false,
"pin": "7",
"name": "WC",
"type": "input",
"description": "Write Control, active-low. When driven high, writes to the entire memory array are inhibited (address bytes are still acknowledged, data bytes are not). When driven low or left floating, write operations are enabled.",
"is_pin1": false,
"source": {
"geometry": "SOIC-8_3.9x4.9mm_P1.27mm.kicad_mod",
"meaning": "page.json:component.pins",
"correspondence": "kicad: symbol pin number == pad name"
}
},
{
"pad": "8",
"kind": "smd",
"shape": "roundrect",
"at": [
2.475,
-1.905
],
"rot": 0.0,
"size": [
1.95,
0.6
],
"layers": [
"F.Cu",
"F.Mask",
"F.Paste"
],
"thermal": false,
"pin": "8",
"name": "VCC",
"type": "power_in",
"description": "Supply voltage input. M24C64-R operating range: 1.8 V to 5.5 V over -40 C to +85 C. Decouple with a 10 nF to 100 nF capacitor between VCC and VSS close to the package.",
"is_pin1": false,
"source": {
"geometry": "SOIC-8_3.9x4.9mm_P1.27mm.kicad_mod",
"meaning": "page.json:component.pins",
"correspondence": "kicad: symbol pin number == pad name"
}
}
]
}