main
Ray Publish 0.1.0 aa640c8
{
  "slug": "m24c64-drmn3tp",
  "version": "0.1.0",
  "type": "component",
  "description": "STMicroelectronics EEPROM, SO-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "memory",
    "m24c64-drmn3tp",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "m24c64-drmn3tp.kicad_sym",
    "m24c64-drmn3tp.kicad_mod",
    "m24c64-drmn3tp.glb",
    "m24c64-drmn3tp.step",
    "m24c64-drmn3tp.lbr",
    "docs/hero.png",
    "docs/m24c64-drmn3tp-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "m24c64-drmn3tp-hero.glb",
    "m24c64-drmn3tp-hero.overlay.json",
    "m24c64-drmn3tp-etched.glb"
  ],
  "component": {
    "mpn": "M24C64-DRMN3TP",
    "manufacturer": "STMicroelectronics",
    "package": "SO-8",
    "pin_count": 8,
    "category": "Memory",
    "subcategory": "EEPROM",
    "datasheet": "https://www.st.com/resource/en/datasheet/m24c64-drmn3tp.pdf",
    "parts": {
      "symbol": "m24c64-drmn3tp.kicad_sym",
      "footprint": "m24c64-drmn3tp.kicad_mod",
      "model_3d": "m24c64-drmn3tp-hero.glb",
      "model_3d_plain": "m24c64-drmn3tp-etched.glb",
      "model_3d_step": "m24c64-drmn3tp-etched.step",
      "model_3d_step_plain": "m24c64-drmn3tp.step",
      "lbr": "m24c64-drmn3tp.lbr"
    },
    "distributor_links": {
      "lcsc": "C377947"
    },
    "distributor_check": {
      "checked_at": "2026-10-23T18:24:49Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "deferred",
        "error": "shared DigiKey quota guard: 884 calls left today"
      },
      "mouser": {
        "pn": null,
        "status": "quota"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "E0",
        "type": "input",
        "description": "Chip Enable input that sets bit b1 of the 7-bit device select code and must be tied to VCC or VSS, and reads as low (0) if left floating."
      },
      {
        "number": "2",
        "name": "E1",
        "type": "input",
        "description": "Chip Enable input that sets bit b2 of the 7-bit device select code and must be tied to VCC or VSS, and reads as low (0) if left floating."
      },
      {
        "number": "3",
        "name": "E2",
        "type": "input",
        "description": "Chip Enable input that sets bit b3 of the 7-bit device select code and must be tied to VCC or VSS, and reads as low (0) if left floating."
      },
      {
        "number": "4",
        "name": "VSS",
        "type": "power_in",
        "description": "Ground, the reference for the VCC supply voltage."
      },
      {
        "number": "5",
        "name": "SDA",
        "type": "bidirectional",
        "description": "Serial Data input/output with an open-drain output that can be wire-OR'ed on the bus, and it needs a pull-up resistor to VCC."
      },
      {
        "number": "6",
        "name": "SCL",
        "type": "input",
        "description": "Serial Clock input that strobes the data on SDA in and out."
      },
      {
        "number": "7",
        "name": "WC",
        "type": "input",
        "description": "Write Control input (active high) that disables write operations to the entire memory array when driven high, and writes are enabled when it is driven low or left floating."
      },
      {
        "number": "8",
        "name": "VCC",
        "type": "power_in",
        "description": "Supply voltage pin, specified from 1.7 V to 5.5 V, with a 10 nF to 100 nF decoupling capacitor recommended close to the VCC/VSS pins."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-sonnet-5-5",
        "primary_mode": "text+vision",
        "consensus_model": "claude-opus-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "vision extraction: provenance cannot be text-verified; needs consensus"
        ],
        "pages_sent": 41,
        "cost_usd": 0.5433,
        "at": "2026-10-23T18:24:36"
      },
      "datasheet": {
        "url": "https://www.st.com/resource/en/datasheet/m24c64-drmn3tp.pdf",
        "pages": 41,
        "sha256": "85c68012834e5400",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "m24c64-drmn3tp.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-23",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "m24c64-drmn3tp-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "7fb6ddbc8602198c7a1df3b4f58b61ce05f20f4f72cad07e3f5731d497990c89",
        "checked": "2026-10-23",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}