main
Ray
Publish 0.1.0
66b4ef2
M24C16-FMN6TP
STMicroelectronics · EEPROM · SO-8
M24C16-FMN6TP from STMicroelectronics, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | Not connected (NC) per the Figure 2 footnote; this pin has no internal connection and is not used. |
| 2 | NC | unconnected | Not connected (NC) per the Figure 2 footnote; this pin has no internal connection and is not used. |
| 3 | NC | unconnected | Not connected (NC) per the Figure 2 footnote; this pin has no internal connection and is not used. |
| 4 | VSS | power_in | Ground; VSS is the reference for the VCC supply voltage. |
| 5 | SDA | bidirectional | Serial data I/O; an open-drain output that may be wire-OR'ed on the bus, requiring a pull-up resistor to VCC. |
| 6 | SCL | input | Serial clock input used to strobe data on SDA(in) and to output data on SDA(out). |
| 7 | WC | input | Write control; when driven high, write operations to the entire memory array are disabled (device select and address bytes are acknowledged, data bytes are not), and when driven low or left floating, writes are enabled. |
| 8 | VCC | power_in | Supply voltage; for the M24C16-F it must be 1.7 V to 5.5 V over the full temperature range, or 1.6 V to 1.7 V over the limited temperature range, and decoupled close to the VCC/VSS pins. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SO-8 |
| Category | Memory |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Ambient operating temperature | TA | -40 | 130 | °C | 15 | ||
| Storage temperature | TSTG | -65 | 150 | °C | 15 | ||
| DC output current (SDA = 0) | IOL | 5 | mA | SDA = 0 | 15 | ||
| Input or output range | VIO | -0.5 | 6.5 | V | 15 | ||
| Supply voltage | VCC | -0.5 | 6.5 | V | 15 | ||
| Electrostatic pulse (human body model) | VESD | 3000 | V | AEC-Q100-002, C1=100 pF, R1=1500 Ω | 15 | ||
| Supply voltage (limited temperature range) | VCC | 1.6 | V | Voltage range F, limited temperature range (1.6 V to 1.7 V) | 16 | ||
| Supply voltage (full temperature range) | VCC | 1.7 | 5.5 | V | Voltage range F, full temperature range | 16 | |
| Ambient operating temperature: READ | TA | -40 | 85 | °C | READ | 16 | |
| Ambient operating temperature: WRITE | TA | -40 | 85 | °C | WRITE, full-range VCC column | 16 | |
| Operating clock frequency | fC | 400 | kHz | 16 | |||
| Load capacitance | Cbus | 100 | pF | AC measurement conditions | 16 | ||
| SCL input rise/fall time, SDA input fall time | 50 | ns | AC measurement conditions | 16 | |||
| Input capacitance (SDA) | CIN | 8 | pF | Characterized only, not tested in production | 17 | ||
| Input capacitance (other pins) | CIN | 6 | pF | Characterized only, not tested in production | 17 | ||
| Input impedance (WC) | ZL | 30 | kΩ | VIN < 0.3 VCC | 17 | ||
| Input impedance (WC) | ZH | 500 | kΩ | VIN > 0.7 VCC | 17 | ||
| Write cycle endurance | Ncycle | 4e+06 | cycles | TA ≤ 25 °C, VCC(min) < VCC < VCC(max) | 17 | ||
| Write cycle endurance | Ncycle | 1.2e+06 | cycles | TA = 85 °C, VCC(min) < VCC < VCC(max) | 17 | ||
| Data retention | 200 | year | TA = 55 °C | 17 | |||
| Input leakage current (SCL, SDA) | ILI | -2 | 2 | µA | VIN = VSS or VCC, device in standby mode | 20 | |
| Output leakage current | ILO | -2 | 2 | µA | SDA in Hi-Z, external voltage applied on SDA: VSS or VCC | 20 | |
| Supply current (Read) | ICC | 0.8 | mA | VCC = 1.6 V or 1.7 V, fc = 400 kHz | 20 | ||
| Supply current (Write) | ICC0 | 1 | mA | Value overaged over tW, VCC ≤ 2.5 V; characterized only | 20 | ||
| Standby supply current | ICC1 | 1 | µA | Device not selected, VIN = VSS or VCC, VCC ≤ 1.8 V | 20 | ||
| Input low voltage (SCL, SDA, WC) | VIL | -0.45 | 0.3 | V / VCC | 2.5 V ≤ VCC; max printed as 0.3 VCC | 20 | |
| Input low voltage (SCL, SDA, WC) | VIL | -0.45 | 0.25 | V / VCC | VCC < 2.5 V; max printed as 0.25 VCC | 20 | |
| Input high voltage (SCL, SDA) | VIH | 0.75 | 6.5 | V / VCC | VCC < 2.5 V; min printed as 0.75 VCC | 20 | |
| Input high voltage (WC) | VIH | 0.75 | 0.6 | V / VCC | VCC < 2.5 V; min printed as 0.75 VCC, max printed as VCC+0.6 | 20 | |
| Output low voltage | VOL | 0.2 | V | IOL = 0.7 mA, VCC ≤ 1.8 V | 20 | ||
| Operating clock frequency (400 kHz) | fC | 400 | kHz | 400 kHz AC characteristics | 21 | ||
| Clock pulse width high | tCHCL | 600 | ns | 400 kHz; tHIGH | 21 | ||
| Clock pulse width low | tCLCH | 1300 | ns | 400 kHz; tLOW | 21 | ||
| SDA fall time | tQL1QL2 | 20 | 300 | ns | 400 kHz; CL = 10 pF | 21 | |
| Data in setup time | tDXCH | 100 | ns | 400 kHz; tSU:DAT | 21 | ||
| Data in hold time | tCLDX | 0 | ns | 400 kHz; tHD:DAT | 21 | ||
| Data out hold time | tCLQX | 100 | ns | 400 kHz; tDH | 21 | ||
| Clock low to next data valid (access time) | tCLQV | 900 | ns | 400 kHz; tAA | 21 | ||
| Start condition setup time | tCHDL | 600 | ns | 400 kHz; tSU:STA | 21 | ||
| Start condition hold time | tDLCL | 600 | ns | 400 kHz; tHD:STA | 21 | ||
| Stop condition setup time | tCHDH | 600 | ns | 400 kHz; tSU:STO | 21 | ||
| Time between Stop and next Start condition | tDHDL | 1300 | ns | 400 kHz; tBUF | 21 | ||
| Write time | tW | 5 | ms | 400 kHz; tWR | 21 | ||
| Pulse width ignored (input filter on SCL and SDA) | tNS | 100 | ns | 400 kHz; single glitch | 21 | ||
| Clock frequency (100 kHz) | fC | 100 | kHz | 100 kHz AC characteristics (I2C Standard mode) | 22 | ||
| Clock pulse width high | tCHCL | 4 | µs | 100 kHz; tHIGH | 22 | ||
| Clock pulse width low | tCLCH | 4.7 | µs | 100 kHz; tLOW | 22 | ||
| Input signal rise time | tXH1XH2 | 1 | µs | 100 kHz; tR; unit ambiguous in table | 22 | ||
| Input signal fall time | tXL1XL2 | 300 | ns | 100 kHz; tF | 22 | ||
| SDA fall time | tQL1QL2 | 300 | ns | 100 kHz; tF | 22 | ||
| Data in setup time | tDXCH | 250 | ns | 100 kHz; tSU:DAT | 22 | ||
| Data in hold time | tCLDX | 0 | ns | 100 kHz; tHD:DAT | 22 | ||
| Data out hold time | tCLQX | 200 | ns | 100 kHz; tDH | 22 | ||
| Clock low to next data valid (access time) | tCLQV | 3450 | ns | 100 kHz; tAA | 22 | ||
| Start condition setup time | tCHDL | 4.7 | µs | 100 kHz; tSU:STA | 22 | ||
| Start condition hold time | tDLCL | 4 | µs | 100 kHz; tHD:STA | 22 | ||
| Stop condition setup time | tCHDH | 4 | µs | 100 kHz; tSU:STO | 22 | ||
| Time between Stop and next Start condition | tDHDL | 4.7 | µs | 100 kHz; tBUF | 22 | ||
| Pulse width ignored (input filter on SCL and SDA) | tNS | 100 | ns | 100 kHz; single glitch | 22 |
CAD (KiCad official)
- Symbol:
M24C16-FMN6TP - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SO-8 (KiCad packages3D, STEP)
- 3D model files:
m24c16-fmn6tp-etched.step/m24c16-fmn6tp-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);m24c16-fmn6tp.step/m24c16-fmn6tp.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (40 pp, sha256
5aa357764dc07b8f, retrieved 2026-11-10, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# M24C16-FMN6TP
**STMicroelectronics** · EEPROM · SO-8
M24C16-FMN6TP from STMicroelectronics, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | Not connected (NC) per the Figure 2 footnote; this pin has no internal connection and is not used. |
| 2 | NC | unconnected | Not connected (NC) per the Figure 2 footnote; this pin has no internal connection and is not used. |
| 3 | NC | unconnected | Not connected (NC) per the Figure 2 footnote; this pin has no internal connection and is not used. |
| 4 | VSS | power_in | Ground; VSS is the reference for the VCC supply voltage. |
| 5 | SDA | bidirectional | Serial data I/O; an open-drain output that may be wire-OR'ed on the bus, requiring a pull-up resistor to VCC. |
| 6 | SCL | input | Serial clock input used to strobe data on SDA(in) and to output data on SDA(out). |
| 7 | WC | input | Write control; when driven high, write operations to the entire memory array are disabled (device select and address bytes are acknowledged, data bytes are not), and when driven low or left floating, writes are enabled. |
| 8 | VCC | power_in | Supply voltage; for the M24C16-F it must be 1.7 V to 5.5 V over the full temperature range, or 1.6 V to 1.7 V over the limited temperature range, and decoupled close to the VCC/VSS pins. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SO-8 |
| Category | Memory |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Ambient operating temperature | TA | -40 | | 130 | °C | | 15 |
| Storage temperature | TSTG | -65 | | 150 | °C | | 15 |
| DC output current (SDA = 0) | IOL | | | 5 | mA | SDA = 0 | 15 |
| Input or output range | VIO | -0.5 | | 6.5 | V | | 15 |
| Supply voltage | VCC | -0.5 | | 6.5 | V | | 15 |
| Electrostatic pulse (human body model) | VESD | | | 3000 | V | AEC-Q100-002, C1=100 pF, R1=1500 Ω | 15 |
| Supply voltage (limited temperature range) | VCC | 1.6 | | | V | Voltage range F, limited temperature range (1.6 V to 1.7 V) | 16 |
| Supply voltage (full temperature range) | VCC | 1.7 | | 5.5 | V | Voltage range F, full temperature range | 16 |
| Ambient operating temperature: READ | TA | -40 | | 85 | °C | READ | 16 |
| Ambient operating temperature: WRITE | TA | -40 | | 85 | °C | WRITE, full-range VCC column | 16 |
| Operating clock frequency | fC | | | 400 | kHz | | 16 |
| Load capacitance | Cbus | | | 100 | pF | AC measurement conditions | 16 |
| SCL input rise/fall time, SDA input fall time | | | | 50 | ns | AC measurement conditions | 16 |
| Input capacitance (SDA) | CIN | | | 8 | pF | Characterized only, not tested in production | 17 |
| Input capacitance (other pins) | CIN | | | 6 | pF | Characterized only, not tested in production | 17 |
| Input impedance (WC) | ZL | 30 | | | kΩ | VIN < 0.3 VCC | 17 |
| Input impedance (WC) | ZH | 500 | | | kΩ | VIN > 0.7 VCC | 17 |
| Write cycle endurance | Ncycle | | | 4e+06 | cycles | TA ≤ 25 °C, VCC(min) < VCC < VCC(max) | 17 |
| Write cycle endurance | Ncycle | | | 1.2e+06 | cycles | TA = 85 °C, VCC(min) < VCC < VCC(max) | 17 |
| Data retention | | 200 | | | year | TA = 55 °C | 17 |
| Input leakage current (SCL, SDA) | ILI | -2 | | 2 | µA | VIN = VSS or VCC, device in standby mode | 20 |
| Output leakage current | ILO | -2 | | 2 | µA | SDA in Hi-Z, external voltage applied on SDA: VSS or VCC | 20 |
| Supply current (Read) | ICC | | | 0.8 | mA | VCC = 1.6 V or 1.7 V, fc = 400 kHz | 20 |
| Supply current (Write) | ICC0 | | | 1 | mA | Value overaged over tW, VCC ≤ 2.5 V; characterized only | 20 |
| Standby supply current | ICC1 | | | 1 | µA | Device not selected, VIN = VSS or VCC, VCC ≤ 1.8 V | 20 |
| Input low voltage (SCL, SDA, WC) | VIL | -0.45 | | 0.3 | V / VCC | 2.5 V ≤ VCC; max printed as 0.3 VCC | 20 |
| Input low voltage (SCL, SDA, WC) | VIL | -0.45 | | 0.25 | V / VCC | VCC < 2.5 V; max printed as 0.25 VCC | 20 |
| Input high voltage (SCL, SDA) | VIH | 0.75 | | 6.5 | V / VCC | VCC < 2.5 V; min printed as 0.75 VCC | 20 |
| Input high voltage (WC) | VIH | 0.75 | | 0.6 | V / VCC | VCC < 2.5 V; min printed as 0.75 VCC, max printed as VCC+0.6 | 20 |
| Output low voltage | VOL | | | 0.2 | V | IOL = 0.7 mA, VCC ≤ 1.8 V | 20 |
| Operating clock frequency (400 kHz) | fC | | | 400 | kHz | 400 kHz AC characteristics | 21 |
| Clock pulse width high | tCHCL | 600 | | | ns | 400 kHz; tHIGH | 21 |
| Clock pulse width low | tCLCH | 1300 | | | ns | 400 kHz; tLOW | 21 |
| SDA fall time | tQL1QL2 | 20 | | 300 | ns | 400 kHz; CL = 10 pF | 21 |
| Data in setup time | tDXCH | 100 | | | ns | 400 kHz; tSU:DAT | 21 |
| Data in hold time | tCLDX | 0 | | | ns | 400 kHz; tHD:DAT | 21 |
| Data out hold time | tCLQX | 100 | | | ns | 400 kHz; tDH | 21 |
| Clock low to next data valid (access time) | tCLQV | | | 900 | ns | 400 kHz; tAA | 21 |
| Start condition setup time | tCHDL | 600 | | | ns | 400 kHz; tSU:STA | 21 |
| Start condition hold time | tDLCL | 600 | | | ns | 400 kHz; tHD:STA | 21 |
| Stop condition setup time | tCHDH | 600 | | | ns | 400 kHz; tSU:STO | 21 |
| Time between Stop and next Start condition | tDHDL | 1300 | | | ns | 400 kHz; tBUF | 21 |
| Write time | tW | | | 5 | ms | 400 kHz; tWR | 21 |
| Pulse width ignored (input filter on SCL and SDA) | tNS | | | 100 | ns | 400 kHz; single glitch | 21 |
| Clock frequency (100 kHz) | fC | | | 100 | kHz | 100 kHz AC characteristics (I2C Standard mode) | 22 |
| Clock pulse width high | tCHCL | 4 | | | µs | 100 kHz; tHIGH | 22 |
| Clock pulse width low | tCLCH | 4.7 | | | µs | 100 kHz; tLOW | 22 |
| Input signal rise time | tXH1XH2 | | | 1 | µs | 100 kHz; tR; unit ambiguous in table | 22 |
| Input signal fall time | tXL1XL2 | | | 300 | ns | 100 kHz; tF | 22 |
| SDA fall time | tQL1QL2 | | | 300 | ns | 100 kHz; tF | 22 |
| Data in setup time | tDXCH | 250 | | | ns | 100 kHz; tSU:DAT | 22 |
| Data in hold time | tCLDX | 0 | | | ns | 100 kHz; tHD:DAT | 22 |
| Data out hold time | tCLQX | 200 | | | ns | 100 kHz; tDH | 22 |
| Clock low to next data valid (access time) | tCLQV | | | 3450 | ns | 100 kHz; tAA | 22 |
| Start condition setup time | tCHDL | 4.7 | | | µs | 100 kHz; tSU:STA | 22 |
| Start condition hold time | tDLCL | 4 | | | µs | 100 kHz; tHD:STA | 22 |
| Stop condition setup time | tCHDH | 4 | | | µs | 100 kHz; tSU:STO | 22 |
| Time between Stop and next Start condition | tDHDL | 4.7 | | | µs | 100 kHz; tBUF | 22 |
| Pulse width ignored (input filter on SCL and SDA) | tNS | | | 100 | ns | 100 kHz; single glitch | 22 |
## CAD (KiCad official)
- Symbol: `M24C16-FMN6TP`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SO-8 (KiCad packages3D, STEP)
- 3D model files: `m24c16-fmn6tp-etched.step` / `m24c16-fmn6tp-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `m24c16-fmn6tp.step` / `m24c16-fmn6tp.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589828589920559104) (40 pp, sha256 `5aa357764dc07b8f`, retrieved 2026-11-10, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/m24c16-fmn6tp-datasheet.pdf)