main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers m24c16-fmn6tp: viewers rendered from the public page · Ray
m24c16-fmn6tp-etched.glb Publish 0.1.0 · Ray
m24c16-fmn6tp-etched.step m24c16-fmn6tp: factory component page (tier=lcsc) · Ray
m24c16-fmn6tp-hero.glb m24c16-fmn6tp: hero GLB from the etched model (keeps the MPN mark) · Ray
m24c16-fmn6tp-hero.overlay.json Publish 0.1.0 · Ray
m24c16-fmn6tp.glb Publish 0.1.0 · Ray
m24c16-fmn6tp.kicad_mod Publish 0.1.0 · Ray
m24c16-fmn6tp.kicad_sym Publish 0.1.0 · Ray
m24c16-fmn6tp.lbr Publish 0.1.0 · Ray
m24c16-fmn6tp.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier lcsc, 8 pins · Ray

M24C16-FMN6TP

STMicroelectronics · EEPROM · SO-8

M24C16-FMN6TP from STMicroelectronics, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NC unconnected Not connected (NC) per the Figure 2 footnote; this pin has no internal connection and is not used.
2 NC unconnected Not connected (NC) per the Figure 2 footnote; this pin has no internal connection and is not used.
3 NC unconnected Not connected (NC) per the Figure 2 footnote; this pin has no internal connection and is not used.
4 VSS power_in Ground; VSS is the reference for the VCC supply voltage.
5 SDA bidirectional Serial data I/O; an open-drain output that may be wire-OR'ed on the bus, requiring a pull-up resistor to VCC.
6 SCL input Serial clock input used to strobe data on SDA(in) and to output data on SDA(out).
7 WC input Write control; when driven high, write operations to the entire memory array are disabled (device select and address bytes are acknowledged, data bytes are not), and when driven low or left floating, writes are enabled.
8 VCC power_in Supply voltage; for the M24C16-F it must be 1.7 V to 5.5 V over the full temperature range, or 1.6 V to 1.7 V over the limited temperature range, and decoupled close to the VCC/VSS pins.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package SO-8
Category Memory
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Ambient operating temperature TA -40 130 °C 15
Storage temperature TSTG -65 150 °C 15
DC output current (SDA = 0) IOL 5 mA SDA = 0 15
Input or output range VIO -0.5 6.5 V 15
Supply voltage VCC -0.5 6.5 V 15
Electrostatic pulse (human body model) VESD 3000 V AEC-Q100-002, C1=100 pF, R1=1500 Ω 15
Supply voltage (limited temperature range) VCC 1.6 V Voltage range F, limited temperature range (1.6 V to 1.7 V) 16
Supply voltage (full temperature range) VCC 1.7 5.5 V Voltage range F, full temperature range 16
Ambient operating temperature: READ TA -40 85 °C READ 16
Ambient operating temperature: WRITE TA -40 85 °C WRITE, full-range VCC column 16
Operating clock frequency fC 400 kHz 16
Load capacitance Cbus 100 pF AC measurement conditions 16
SCL input rise/fall time, SDA input fall time 50 ns AC measurement conditions 16
Input capacitance (SDA) CIN 8 pF Characterized only, not tested in production 17
Input capacitance (other pins) CIN 6 pF Characterized only, not tested in production 17
Input impedance (WC) ZL 30 kΩ VIN < 0.3 VCC 17
Input impedance (WC) ZH 500 kΩ VIN > 0.7 VCC 17
Write cycle endurance Ncycle 4e+06 cycles TA ≤ 25 °C, VCC(min) < VCC < VCC(max) 17
Write cycle endurance Ncycle 1.2e+06 cycles TA = 85 °C, VCC(min) < VCC < VCC(max) 17
Data retention 200 year TA = 55 °C 17
Input leakage current (SCL, SDA) ILI -2 2 µA VIN = VSS or VCC, device in standby mode 20
Output leakage current ILO -2 2 µA SDA in Hi-Z, external voltage applied on SDA: VSS or VCC 20
Supply current (Read) ICC 0.8 mA VCC = 1.6 V or 1.7 V, fc = 400 kHz 20
Supply current (Write) ICC0 1 mA Value overaged over tW, VCC ≤ 2.5 V; characterized only 20
Standby supply current ICC1 1 µA Device not selected, VIN = VSS or VCC, VCC ≤ 1.8 V 20
Input low voltage (SCL, SDA, WC) VIL -0.45 0.3 V / VCC 2.5 V ≤ VCC; max printed as 0.3 VCC 20
Input low voltage (SCL, SDA, WC) VIL -0.45 0.25 V / VCC VCC < 2.5 V; max printed as 0.25 VCC 20
Input high voltage (SCL, SDA) VIH 0.75 6.5 V / VCC VCC < 2.5 V; min printed as 0.75 VCC 20
Input high voltage (WC) VIH 0.75 0.6 V / VCC VCC < 2.5 V; min printed as 0.75 VCC, max printed as VCC+0.6 20
Output low voltage VOL 0.2 V IOL = 0.7 mA, VCC ≤ 1.8 V 20
Operating clock frequency (400 kHz) fC 400 kHz 400 kHz AC characteristics 21
Clock pulse width high tCHCL 600 ns 400 kHz; tHIGH 21
Clock pulse width low tCLCH 1300 ns 400 kHz; tLOW 21
SDA fall time tQL1QL2 20 300 ns 400 kHz; CL = 10 pF 21
Data in setup time tDXCH 100 ns 400 kHz; tSU:DAT 21
Data in hold time tCLDX 0 ns 400 kHz; tHD:DAT 21
Data out hold time tCLQX 100 ns 400 kHz; tDH 21
Clock low to next data valid (access time) tCLQV 900 ns 400 kHz; tAA 21
Start condition setup time tCHDL 600 ns 400 kHz; tSU:STA 21
Start condition hold time tDLCL 600 ns 400 kHz; tHD:STA 21
Stop condition setup time tCHDH 600 ns 400 kHz; tSU:STO 21
Time between Stop and next Start condition tDHDL 1300 ns 400 kHz; tBUF 21
Write time tW 5 ms 400 kHz; tWR 21
Pulse width ignored (input filter on SCL and SDA) tNS 100 ns 400 kHz; single glitch 21
Clock frequency (100 kHz) fC 100 kHz 100 kHz AC characteristics (I2C Standard mode) 22
Clock pulse width high tCHCL 4 µs 100 kHz; tHIGH 22
Clock pulse width low tCLCH 4.7 µs 100 kHz; tLOW 22
Input signal rise time tXH1XH2 1 µs 100 kHz; tR; unit ambiguous in table 22
Input signal fall time tXL1XL2 300 ns 100 kHz; tF 22
SDA fall time tQL1QL2 300 ns 100 kHz; tF 22
Data in setup time tDXCH 250 ns 100 kHz; tSU:DAT 22
Data in hold time tCLDX 0 ns 100 kHz; tHD:DAT 22
Data out hold time tCLQX 200 ns 100 kHz; tDH 22
Clock low to next data valid (access time) tCLQV 3450 ns 100 kHz; tAA 22
Start condition setup time tCHDL 4.7 µs 100 kHz; tSU:STA 22
Start condition hold time tDLCL 4 µs 100 kHz; tHD:STA 22
Stop condition setup time tCHDH 4 µs 100 kHz; tSU:STO 22
Time between Stop and next Start condition tDHDL 4.7 µs 100 kHz; tBUF 22
Pulse width ignored (input filter on SCL and SDA) tNS 100 ns 100 kHz; single glitch 22

CAD (KiCad official)

  • Symbol: M24C16-FMN6TP
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SO-8 (KiCad packages3D, STEP)
  • 3D model files: m24c16-fmn6tp-etched.step / m24c16-fmn6tp-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); m24c16-fmn6tp.step / m24c16-fmn6tp.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (40 pp, sha256 5aa357764dc07b8f, retrieved 2026-11-10, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF