main
Ray
m24c02-wmn6tp: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC bo…
673c0d3
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166
{
"slug": "m24c02-wmn6tp",
"version": "0.1.0",
"type": "component",
"description": "STMicroelectronics EEPROM, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
"tags": [
"component",
"memory",
"m24c02-wmn6tp"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"m24c02-wmn6tp.kicad_sym",
"m24c02-wmn6tp.kicad_mod",
"m24c02-wmn6tp.glb",
"m24c02-wmn6tp.step",
"m24c02-wmn6tp.lbr",
"docs/hero.png",
"docs/m24c02-wmn6tp-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"m24c02-wmn6tp-etched.step"
],
"visibility": {
"public": true
},
"author": {
"name": "Ray"
},
"component": {
"mpn": "M24C02-WMN6TP",
"manufacturer": "STMicroelectronics",
"package": "SOIC-8",
"pin_count": 8,
"category": "EEPROM",
"datasheet": "https://www.st.com/resource/en/datasheet/m24c02-wmn6tp.pdf",
"parts": {
"symbol": "m24c02-wmn6tp.kicad_sym",
"footprint": "m24c02-wmn6tp.kicad_mod",
"model_3d": "m24c02-wmn6tp-etched.glb",
"model_3d_plain": "m24c02-wmn6tp.glb",
"model_3d_step": "m24c02-wmn6tp-etched.step",
"model_3d_step_plain": "m24c02-wmn6tp.step",
"lbr": "m24c02-wmn6tp.lbr"
},
"pins": [
{
"number": "1",
"name": "E0",
"type": "input",
"description": "Chip Enable address input bit 0. Tied to VCC or VSS to set b1 of the 7-bit I2C device select code, allowing up to 8 devices on one bus. Read as low (0) if left floating."
},
{
"number": "2",
"name": "E1",
"type": "input",
"description": "Chip Enable address input bit 1. Tied to VCC or VSS to set b2 of the 7-bit I2C device select code. Read as low (0) if left floating."
},
{
"number": "3",
"name": "E2",
"type": "input",
"description": "Chip Enable address input bit 2. Tied to VCC or VSS to set b3 of the 7-bit I2C device select code. Read as low (0) if left floating."
},
{
"number": "4",
"name": "VSS",
"type": "power_in",
"description": "Ground reference for VCC supply voltage."
},
{
"number": "5",
"name": "SDA",
"type": "bidirectional",
"description": "I2C Serial Data. Open-drain input/output; requires an external pull-up resistor to VCC. May be wire-OR'ed with other open-drain devices on the bus."
},
{
"number": "6",
"name": "SCL",
"type": "input",
"description": "I2C Serial Clock input. Strobes data on SDA(in) and clocks data out on SDA(out). Supports 100 kHz and 400 kHz I2C modes."
},
{
"number": "7",
"name": "WC",
"type": "input",
"description": "Write Control input (active-low, shown overlined WC). When driven high, write operations to the entire memory array are inhibited (device select and address are ACKed but data bytes are not). Writes are enabled when driven low or left floating."
},
{
"number": "8",
"name": "VCC",
"type": "power_in",
"description": "Supply voltage. For the -W option: 2.5 V to 5.5 V. Decouple to VSS with a 10-100 nF capacitor close to the package pins."
}
],
"provenance": {
"rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"distributor_links": {
"digikey": "497-8552-2-ND",
"mouser": "511-M24C02-WMN6TP"
},
"distributor_check": {
"checked_at": "2026-10-05T19:06:58Z",
"source": "Component Ocean /api/assign-pns + lcsc_map",
"digikey": {
"pn": "497-8552-2-ND",
"status": "found"
},
"mouser": {
"pn": "511-M24C02-WMN6TP",
"status": "found"
}
},
"models_3d": [
{
"file": "m24c02-wmn6tp.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6,
4.9,
1.75
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "m24c02-wmn6tp-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6,
4.9,
1.75
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "0ad27319bf4d30c2616b0073d40d1899e6a700045de318b3001e539ecbb6586c",
"checked": "2026-11-03",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}