main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs m24c02-wmn6tp: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers m24c02-wmn6tp: viewers · Ray
m24c02-wmn6tp-etched.fit.json m24c02-wmn6tp: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
m24c02-wmn6tp-etched.glb m24c02-wmn6tp: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC bo… · Ray
m24c02-wmn6tp-etched.step m24c02-wmn6tp: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC bo… · Ray
m24c02-wmn6tp.glb Publish 0.1.0 · Ray
m24c02-wmn6tp.kicad_mod Publish 0.1.0 · Ray
m24c02-wmn6tp.kicad_sym Publish 0.1.0 · Ray
m24c02-wmn6tp.lbr Publish 0.1.0 · Ray
m24c02-wmn6tp.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json m24c02-wmn6tp: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC bo… · Ray
README.md m24c02-wmn6tp: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray

M24C02-WMN6TP

STMicroelectronics · EEPROM · SOIC-8

M24C02-WMN6TP from STMicroelectronics, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 E0 input Chip Enable address input bit 0. Tied to VCC or VSS to set b1 of the 7-bit I2C device select code, allowing up to 8 devices on one bus. Read as low (0) if left floating.
2 E1 input Chip Enable address input bit 1. Tied to VCC or VSS to set b2 of the 7-bit I2C device select code. Read as low (0) if left floating.
3 E2 input Chip Enable address input bit 2. Tied to VCC or VSS to set b3 of the 7-bit I2C device select code. Read as low (0) if left floating.
4 VSS power_in Ground reference for VCC supply voltage.
5 SDA bidirectional I2C Serial Data. Open-drain input/output; requires an external pull-up resistor to VCC. May be wire-OR'ed with other open-drain devices on the bus.
6 SCL input I2C Serial Clock input. Strobes data on SDA(in) and clocks data out on SDA(out). Supports 100 kHz and 400 kHz I2C modes.
7 WC input Write Control input (active-low, shown overlined WC). When driven high, write operations to the entire memory array are inhibited (device select and address are ACKed but data bytes are not). Writes are enabled when driven low or left floating.
8 VCC power_in Supply voltage. For the -W option: 2.5 V to 5.5 V. Decouple to VSS with a 10-100 nF capacitor close to the package pins.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package SOIC-8
Category Memory
Pins 8

Ordering variants

  • M24C02-WMN6TPMN
  • M24C02-WMN6TPMN6
  • M24C02-WMN6TPMN6T
  • M24C02-WMN6TPMN6TP
  • M24C02-WMN6TPMN6TG
  • M24C02-WMN6TPDW
  • M24C02-WMN6TPDW6
  • M24C02-WMN6TPDW6T
  • M24C02-WMN6TPDW6TP
  • M24C02-WMN6TPDW6TG
  • M24C02-WMN6TPBN
  • M24C02-WMN6TPBN6
  • M24C02-WMN6TPBN6P
  • M24C02-WMN6TPMC
  • M24C02-WMN6TPMC6
  • M24C02-WMN6TPMC6T
  • M24C02-WMN6TPMC6TP
  • M24C02-WMN6TPMC6TG

CAD (KiCad official)

  • Symbol: M24C02-WMN6TP
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: m24c02-wmn6tp-etched.step / m24c02-wmn6tp-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); m24c02-wmn6tp.step / m24c02-wmn6tp.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (34 pp, sha256 3f5964536654d374, retrieved 2026-08-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF