main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers m0g3507qrgzrq1: viewers · Ray
m0g3507qrgzrq1-etched.glb Publish 0.1.0 · Ray
m0g3507qrgzrq1-etched.step m0g3507qrgzrq1: factory component page (tier=mfr) · Ray
m0g3507qrgzrq1-hero.glb m0g3507qrgzrq1: hero GLB from the etched model (keeps the MPN mark) · Ray
m0g3507qrgzrq1-hero.overlay.json Publish 0.1.0 · Ray
m0g3507qrgzrq1.glb Publish 0.1.0 · Ray
m0g3507qrgzrq1.kicad_mod Publish 0.1.0 · Ray
m0g3507qrgzrq1.kicad_sym Publish 0.1.0 · Ray
m0g3507qrgzrq1.lbr Publish 0.1.0 · Ray
m0g3507qrgzrq1.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 49 pins · Ray

M0G3507QRGZRQ1

Texas Instruments · IC · VQFN-48(7x7)

M0G3507QRGZRQ1 from Texas Instruments, in a VQFN-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 PA0 bidirectional General-purpose 5 V-tolerant open-drain I/O with wake from SHUTDOWN, default BSL I2C_SDA, and FCC_IN, UART0_TX, I2C0_SDA and TIMA0_C0 as alternates; an external pull-up is required for output high.
2 PA1 bidirectional General-purpose 5 V-tolerant open-drain I/O with default BSL I2C_SCL, and UART0_RX, I2C0_SCL and TIMA0_C1 as alternates; an external pull-up is required for output high.
3 PA28 bidirectional High-drive GPIO with wake from SHUTDOWN, with UART0_TX, I2C0_SDA and TIMA0_C3 as alternate functions; the high-drive IO is rated for 20 mA sink or source.
4 NRST input Active-low reset input that must be pulled high to VDD for the device to release from reset and start the boot process.
5 PA31 bidirectional High-drive GPIO with wake from SHUTDOWN, with UART0_RX, I2C0_SCL, TIMA0_C3N and CLK_OUT as alternate functions; the high-drive IO is rated for 20 mA.
6 VDD power_in Power supply, 1.62 V to 3.6 V per recommended operating conditions, with a 10 µF capacitor from VDD to VSS required.
7 VSS power_in Ground supply for the device; TI recommends connecting the QFN exposed thermal pad to VSS.
8 PA2 bidirectional General-purpose I/O that is also the ROSC pin; when the SYSOSC frequency correction loop is used, a 100 kΩ ±0.1% resistor to VSS is required on this pin.
9 PA3 bidirectional General-purpose I/O that also serves as the LFXIN input for the 32 kHz low-frequency crystal oscillator (LFXT).
10 PA4 bidirectional General-purpose I/O that also serves as the LFXOUT crystal output or LFCLK_IN digital low-frequency clock input.
11 PA5 bidirectional General-purpose I/O that also serves as the HFXIN input for the high-frequency crystal oscillator (HFXT) or FCC_IN.
12 PA6 bidirectional General-purpose I/O that also serves as the HFXOUT crystal output for HFXT or the HFCLK_IN digital high-frequency clock input.
13 PA7 bidirectional Standard general-purpose I/O with CLK_OUT (configurable clock output), COMP0_OUT, and TIMA0_C2 as alternate functions.
14 PB2 bidirectional Standard general-purpose I/O with UART3_TX, I2C1_SCL and TIMA0_C3 as alternate functions.
15 PB3 bidirectional Standard general-purpose I/O with UART3_RX, I2C1_SDA and TIMA0_C3N as alternate functions.
16 PA8 bidirectional Standard general-purpose I/O with UART1_TX, SPI0_CS0 and TIMA0_C0 as alternate functions.
17 PA9 bidirectional High-speed general-purpose I/O with UART1_RX, SPI0_PICO, RTC_OUT and CLK_OUT as alternate functions.
18 PA10 bidirectional High-drive general-purpose I/O (rated 20 mA) with default BSL UART_TX, UART0_TX, I2C0_SDA and CLK_OUT as alternate functions.
19 PA11 bidirectional High-drive general-purpose I/O (rated 20 mA) with default BSL UART_RX, UART0_RX, I2C0_SCL and COMP0_OUT as alternate functions.
20 PB6 bidirectional Standard general-purpose I/O with UART1_TX, SPI1_CS0 and TIMG8_C0 as alternate functions.
21 PB7 bidirectional Standard general-purpose I/O with UART1_RX, SPI1_POCI and TIMG8_C1 as alternate functions.
22 PB8 bidirectional Standard general-purpose I/O with UART1_CTS, SPI1_PICO, TIMA0_C0 and COMP1_OUT as alternate functions.
23 PB9 bidirectional Standard general-purpose I/O with UART1_RTS, SPI1_SCK and TIMA0_C1 as alternate functions.
24 PB14 bidirectional Standard general-purpose I/O with SPI1_CS3, SPI1_POCI and TIMA0_C0 as alternate functions.
25 PB15 bidirectional Standard general-purpose I/O with UART2_TX, SPI1_PICO and UART3_CTS as alternate functions.
26 PB16 bidirectional Standard general-purpose I/O with UART2_RX, SPI1_SCK and UART3_RTS as alternate functions.
27 PA12 bidirectional High-speed general-purpose I/O with UART3_CTS, SPI0_SCK, CAN_TX and FCC_IN as alternate functions.
28 PA13 bidirectional High-speed general-purpose I/O with COMP0_IN2- analog input, UART3_RTS, SPI0_POCI and CAN_RX as alternate functions.
29 PA14 bidirectional High-speed general-purpose I/O that is also the COMP0_IN2+ analog input and ADC0 analog input A0_12.
30 PA15 bidirectional Standard general-purpose I/O that is also ADC1 analog input A1_0 and DAC_OUT; when DAC_OUT is used, A1_0 cannot sample external signals and external circuitry should be avoided on this pin.
31 PA16 bidirectional Standard general-purpose I/O that is also ADC1 analog input A1_1 and OPA1_OUT, with COMP2_OUT and FCC_IN as alternates.
32 PA17 bidirectional Standard general-purpose I/O with wake from SHUTDOWN that is also ADC1 analog input A1_2, OPA1_IN1- and COMP0_IN1-.
33 PA18 bidirectional Standard general-purpose I/O with wake from SHUTDOWN that is also ADC1 analog input A1_3, OPA1_IN1+, COMP0_IN1+ and GPAMP_IN-, and serves as the default BSL_invoke input.
34 PA19 bidirectional High-speed general-purpose I/O that serves as the SWDIO serial wire debug data input/output.
35 PA20 bidirectional Standard general-purpose I/O that serves as the SWCLK serial wire debug clock input.
36 PB17 bidirectional Standard general-purpose I/O that is also ADC1 analog input A1_4 and COMP1_IN2-, with UART2_TX and SPI0_PICO as alternates.
37 PB18 bidirectional Standard general-purpose I/O that is also ADC1 analog input A1_5 and COMP1_IN2+, with UART2_RX and SPI0_SCK as alternates.
38 PB19 bidirectional Standard general-purpose I/O that is also ADC1 analog input A1_6, COMP2_IN1+ and OPA1_IN0+, with COMP2_OUT as an alternate.
39 PA21 bidirectional Standard general-purpose I/O that is also ADC1 analog input A1_7, COMP2_IN1- and the VREF- reference ground; this pin has an internal test connection and no injection current is allowed on it.
40 PA22 bidirectional Standard general-purpose I/O that is also ADC0 analog input A0_7, GPAMP_OUT and OPA0_OUT, with CLK_OUT as an alternate.
41 PB20 bidirectional Standard general-purpose I/O that is also ADC0 analog input A0_6 and OPA1_IN0-, with SPI0_CS2 and TIMA0_C2 as alternates.
42 PB24 bidirectional Standard general-purpose I/O that is also ADC0 analog input A0_5 and COMP1_IN1+, with SPI0_CS3 and TIMA0_C3 as alternates.
43 PA23 bidirectional Standard general-purpose I/O that serves as the VREF+ voltage reference input (external reference) or internal reference output, and is also COMP1_IN1-.
44 PA24 bidirectional Standard general-purpose I/O that is also ADC0 analog input A0_3 and OPA0_IN1-, with UART2_RX and SPI0_CS2 as alternates.
45 PA25 bidirectional Standard general-purpose I/O that is also ADC0 analog input A0_2 and OPA0_IN1+, with UART3_RX and SPI1_CS3 as alternates.
46 PA26 bidirectional Standard general-purpose I/O that is also ADC0 analog input A0_1, COMP0_IN0+, OPA0_IN0+ and GPAMP_IN+, with UART3_TX and SPI1_CS0 as alternates.
47 PA27 bidirectional Standard general-purpose I/O that is also ADC0 analog input A0_0, COMP0_IN0- and OPA0_IN0-, with RTC_OUT and SPI1_CS1 as alternates.
48 VCORE power_out Regulated core power supply output that requires a 470 nF capacitor to VSS placed close to the device; do not supply any voltage or apply any external load to this pin.
49 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VQFN-48(7x7)
Category
Pins 49

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage at VDD pin VDD -0.3 4.1 V At VDD pin 27
Input voltage, 5-V tolerant open-drain pins VI -0.3 5.5 V Applied to any 5-V tolerant open-drain pins 27
Input voltage, common tolerance pins VI -0.3 4.1 V Applied to any common tolerance pins; printed as VDD + 0.3 (4.1 MAX) 27
Current into VDD pin (source) IVDD 80 mA -40℃ ≤ Tj ≤ 130℃ 27
Current into VDD pin (source) IVDD 100 mA -40℃ ≤ Tj ≤ 90℃ 27
Current out of VSS pin (sink) IVSS 80 mA -40℃ ≤ Tj≤ 130℃ 27
Current out of VSS pin (sink) IVSS 100 mA -40℃ ≤ Tj≤ 90℃ 27
Current of SDIO pin IIO 6 mA Current sunk or sourced by SDIO pin 27
Current of HSIO pin IIO 6 mA Current sunk or sourced by HSIO pin 27
Current of HDIO pin IIO 20 mA Current sunk or sourced by HDIO pin 27
Current of ODIO pin IIO 20 mA Current sunk by ODIO pin 27
Supported diode current ID -2 2 mA Diode current at any device pin 27
Ambient temperature TA -40 125 °C 27
Junction temperature TJ -40 130 °C 27
Storage temperature Tstg -40 150 °C 27
Supply voltage VDD 1.62 3.6 V 27
Ambient temperature, Q version TA -40 125 °C Q version 27
Max junction temperature, Q version TJ 130 °C Q version 27
MCLK, CPUCLK frequency with 2 flash wait states fMCLK 80 MHz MCLK, CPUCLK frequency with 2 flash wait states 28
MCLK, CPUCLK frequency with 1 flash wait state fMCLK 48 MHz MCLK, CPUCLK frequency with 1 flash wait state 28
MCLK, CPUCLK frequency with 0 flash wait states fMCLK 24 MHz MCLK, CPUCLK frequency with 0 flash wait states 28
ULPCLK frequency (PD0 bus clock) fULPCLK 40 MHz 28
High level input voltage, ODIO VIH 5.5 V VDD≥1.62V; printed min is 0.7*VDD 37
High level input voltage, ODIO VIH 2 5.5 V VDD≥2.7V 37
Low level input voltage, ODIO VIL -0.3 V VDD≥1.62V; printed max is 0.3*VDD 37
Low level input voltage, ODIO VIL -0.3 0.8 V VDD≥2.7V 37
Low level input voltage, all I/O except ODIO & Reset VIL -0.3 V VDD≥1.62V; printed max is 0.3*VDD 37
High-Z leakage current (All packages except PM) SDIO Ilkg 50 nA 1.62V ≤ VDD ≤ 3.6V, -40 ℃ ≤ Ta ≤ 125 ℃ 37
Low level output voltage, SDIO VOL 0.4 V VDD≥2.7V, /IIO/,max=6mA; VDD≥1.71V, /IIO/,max=2mA; VDD≥1.62V, /IIO/,max=1.5mA; -40 °C ≤Ta≤25 °C 39
Low level output voltage, SDIO VOL 0.45 V VDD≥2.7V, /IIO/,max=6mA; VDD≥1.71V, /IIO/,max=2mA; VDD≥1.62V, /IIO/,max=1.5mA; -40 °C ≤Ta≤125 °C 39
Low level output voltage, ODIO VOL 0.4 V VDD≥2.7V, IOL,max=8mA; VDD≥1.71V, IOL,max=4mA; -40 °C ≤Ta≤25 °C 39
Low level output voltage, ODIO VOL 0.45 V VDD≥2.7V, IOL,max=8mA; VDD≥1.71V, IOL,max=4mA; -40 °C ≤Ta≤125 °C 39
Output fall time, ODIO tf 120 ns VDD ≥ 1.71V, FM+, CL= 20pF-100pF; printed min is 20*VDD/5.5 40
STOP mode supply current, IDDSTOP0 IDDSTOP0 450 uA VDD=3.3V; 25°C; SYSOSC=32MHz, USE4MHZSTOP=0, DISABLESTOP=0; ULPCLK 4MHz 30
STOP mode supply current, IDDSTOP0 IDDSTOP0 577 uA VDD=3.3V; 125°C; SYSOSC=32MHz, USE4MHZSTOP=0, DISABLESTOP=0; ULPCLK 4MHz 30
STOP mode supply current, IDDSTOP2 IDDSTOP2 67 uA VDD=3.3V; 25°C; SYSOSC off, DISABLESTOP=1, ULPCLK=LFCLK 32kHz 30
STOP mode supply current, IDDSTOP2 IDDSTOP2 170 uA VDD=3.3V; 125°C; SYSOSC off, DISABLESTOP=1, ULPCLK=LFCLK 32kHz 30
SLEEP mode supply current, IDDSLEEP IDDSLEEP 3400 uA VDD=3.3V; 25°C; MCLK=SYSPLL, SYSPLLREF=SYSOSC, CPU is halted, 80MHz 30
SLEEP mode supply current, IDDSLEEP IDDSLEEP 5509 uA VDD=3.3V; 125°C; MCLK=SYSPLL, SYSPLLREF=SYSOSC, CPU is halted, 80MHz 30
STANDBY mode supply current, IDDSTBY0 IDDSTBY0 7 uA VDD=3.3V; 25°C; LFCLK=LFXT, STOPCLKSTBY=0, RTC enabled, 32kHz 31
STANDBY mode supply current, IDDSTBY0 IDDSTBY0 105 uA VDD=3.3V; 125°C; LFCLK=LFXT, STOPCLKSTBY=0, RTC enabled, 32kHz 31
VREF output voltage VREF 1.38 1.4 1.42 V BUFCONFIG = 1 43
VREF output voltage VREF 2.46 2.5 2.54 V BUFCONFIG = 0 43
Power-on reset voltage level, rising VPOR+ 0.95 1.3 1.59 V Rising 31
Power-on reset voltage level, falling VPOR- 0.9 1.25 1.54 V Falling 31
Brown-out reset voltage level 0, rising VBOR0+ 1.56 1.59 1.62 V Rising; device operating in RUN, SLEEP, or STOP mode 32
Integral linearity error (INL) EI -2 2 LSB External reference 42
Differential linearity error (DNL) ED -1 1 LSB Guaranteed no missing codes; External reference 42
Offset error EO -5 5 mV Internal or External reference 42
Gain error EG -4 4 LSB External reference 42
Temperature coefficient TSc -2.1 -1.8 -1.7 mV/℃ -40℃ ≤ Tj ≤ 130℃ 43
Core voltage on VCORE pin VCORE 1.35 V 27
Capacitor connected between VDD and VSS CVDD 10 uF 27
Capacitor connected between VCORE and VSS CVCORE 470 nF 27
Junction-to-ambient thermal resistance (VQFN-48 RGZ) RθJA 29.9 °C/W 28
Junction-to-case (top) thermal resistance (VQFN-48 RGZ) RθJC(top) 20.5 °C/W 28
Junction-to-board thermal resistance (VQFN-48 RGZ) RθJB 12.3 °C/W 28
Junction-to-top characterization parameter (VQFN-48 RGZ) ΨJT 0.4 °C/W 28
Junction-to-board characterization parameter (VQFN-48 RGZ) ΨJB 12.2 °C/W 28
Junction-to-case (bottom) thermal resistance (VQFN-48 RGZ) RθJC(bot) 4.1 °C/W 28

CAD (KiCad official)

  • Symbol: M0G3507QRGZRQ1
  • Footprint: Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.15x5.15mm
  • 3D model: VQFN-48(7x7) (KiCad packages3D, STEP)
  • 3D model files: m0g3507qrgzrq1-etched.step / m0g3507qrgzrq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); m0g3507qrgzrq1.step / m0g3507qrgzrq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (126 pp, sha256 c44df29a9981ebcd, retrieved 2026-10-31, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF