Generated by kicad-footprint-generator · KiCad file format 20260206
M0G3107QPTRQ1
TI(德州仪器) · IC · LQFP-48(7x7)
M0G3107QPTRQ1 from TI(德州仪器), in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PA0 | bidirectional | 5V-tolerant open-drain GPIO with wake from SHUTDOWN (UART0_TX, I2C0_SDA, TIMA0_C0, FCC_IN), default BSL I2C data (BSLSDA); needs a pullup to output high. |
| 2 | PA1 | bidirectional | 5V-tolerant open-drain GPIO with wake from SHUTDOWN (UART0_RX, I2C0_SCL, TIMA0_C1), default BSL I2C clock (BSLSCL); needs a pullup to output high. |
| 3 | PA28 | bidirectional | High-drive GPIO with wake from SHUTDOWN (UART0_TX, I2C0_SDA, TIMA0_C3, TIMA_FAL0). |
| 4 | NRST | input | Active-low reset input; must be pulled high to VDD or the device cannot start. |
| 5 | PA31 | bidirectional | High-drive GPIO with wake from SHUTDOWN (UART0_RX, I2C0_SCL, CLK_OUT, TIMA0_C3N). |
| 6 | VDD | power_in | Power supply, 1.62 V to 3.6 V, with 10 µF decoupling to VSS. |
| 7 | VSS | power_in | Ground supply. |
| 8 | PA2/ROSC | bidirectional | Standard GPIO or ROSC external resistor pin (100 kΩ to VSS) improving SYSOSC accuracy; usable as GPIO when FCL is not used. |
| 9 | PA3 | bidirectional | Standard GPIO or input for the low-frequency crystal oscillator (LFXT); also SPI0_CS1, UART2_CTS, I2C1_SDA. |
| 10 | PA4 | bidirectional | Standard GPIO or output of the low-frequency crystal oscillator (LFXT) or LFCLK_IN digital clock input; also SPI0_POCI, UART2_RTS, I2C1_SCL. |
| 11 | PA5 | bidirectional | Standard GPIO or input for the high-frequency crystal oscillator (HFXT); also SPI0_PICO, FCC_IN. |
| 12 | PA6 | bidirectional | Standard GPIO or output of the high-frequency crystal oscillator (HFXT) or HFCLK_IN digital clock input; also SPI0_SCK. |
| 13 | PA7 | bidirectional | Standard GPIO with CLK_OUT, TIMG8_C0, TIMA0_C2 functions. |
| 14 | PB2 | bidirectional | Standard GPIO (UART3_TX, UART2_CTS, I2C1_SCL, TIMA0_C3). |
| 15 | PB3 | bidirectional | Standard GPIO (UART3_RX, UART2_RTS, I2C1_SDA, TIMA0_C3N). |
| 16 | PA8 | bidirectional | Standard GPIO (UART1_TX, SPI0_CS0, UART0_RTS, TIMA0_C0). |
| 17 | PA9 | bidirectional | High-speed GPIO (UART1_RX, SPI0_PICO, UART0_CTS, RTC_OUT, CLK_OUT). |
| 18 | PA10 | bidirectional | High-drive GPIO with wake from SHUTDOWN (UART0_TX, SPI0_POCI, I2C0_SDA, CLK_OUT); default BSL UART transmit (BSLTX). |
| 19 | PA11 | bidirectional | High-drive GPIO with wake from SHUTDOWN (UART0_RX, SPI0_SCK, I2C0_SCL); default BSL UART receive (BSLRX). |
| 20 | PB6 | bidirectional | Standard GPIO (UART1_TX, SPI1_CS0, SPI0_CS1, TIMG8_C0). |
| 21 | PB7 | bidirectional | Standard GPIO (UART1_RX, SPI1_POCI, SPI0_CS2, TIMG8_C1). |
| 22 | PB8 | bidirectional | Standard GPIO (UART1_CTS, SPI1_PICO, TIMA0_C0). |
| 23 | PB9 | bidirectional | Standard GPIO (UART1_RTS, SPI1_SCK, TIMA0_C1). |
| 24 | PB14 | bidirectional | Standard GPIO (SPI1_CS3, SPI1_POCI, SPI0_CS3, TIMG12_C1). |
| 25 | PB15 | bidirectional | Standard GPIO (UART2_TX, SPI1_PICO, UART3_CTS, TIMG8_C0). |
| 26 | PB16 | bidirectional | Standard GPIO (UART2_RX, SPI1_SCK, UART3_RTS, TIMG8_C1). |
| 27 | PA12 | bidirectional | High-speed GPIO (UART3_CTS, SPI0_SCK, CAN_TX, FCC_IN). |
| 28 | PA13 | bidirectional | High-speed GPIO (UART3_RTS, SPI0_POCI, UART3_RX, CAN_RX). |
| 29 | PA14 | bidirectional | High-speed GPIO with ADC0 analog input 12 (UART0_CTS, SPI0_PICO, UART3_TX, CLK_OUT). |
| 30 | PA15 | bidirectional | Standard GPIO with ADC1 analog input 0 (UART0_RTS, SPI1_CS2, I2C1_SCL). |
| 31 | PA16 | bidirectional | Standard GPIO with ADC1 analog input 1 (SPI1_POCI, I2C1_SDA, FCC_IN). |
| 32 | PA17 | bidirectional | Standard GPIO with wake from SHUTDOWN and ADC1 analog input 2 (UART1_TX, SPI1_SCK, I2C1_SCL). |
| 33 | PA18 | bidirectional | Standard GPIO with wake from SHUTDOWN, ADC1 analog input 3, GPAMP_IN- and BSL_invoke input. |
| 34 | PA19 | bidirectional | High-speed GPIO, serial wire debug data input/output (SWDIO). |
| 35 | PA20 | input | Standard GPIO, serial wire debug input clock (SWCLK). |
| 36 | PB17 | bidirectional | Standard GPIO with ADC1 analog input 4 (UART2_TX, SPI0_PICO, SPI1_CS1). |
| 37 | PB18 | bidirectional | Standard GPIO with ADC1 analog input 5 (UART2_RX, SPI0_SCK, SPI1_CS2). |
| 38 | PB19 | bidirectional | Standard GPIO with ADC1 analog input 6 (SPI0_POCI, TIMG8_C1, UART0_CTS). |
| 39 | PA21 | bidirectional | Standard GPIO with ADC1 analog input 7 and VREF- (voltage reference ground / external reference input); no injection current allowed on this pin. |
| 40 | PA22 | bidirectional | Standard GPIO with ADC0 analog input 7 and GPAMP_OUT (UART2_RX, CLK_OUT). |
| 41 | PB20 | bidirectional | Standard GPIO with ADC0 analog input 6 (SPI0_CS2, SPI1_CS0, TIMA0_C2). |
| 42 | PB24 | bidirectional | Standard GPIO with ADC0 analog input 5 (SPI0_CS3, SPI0_CS1, TIMA0_C3). |
| 43 | PA23 | bidirectional | Standard GPIO or VREF+ (voltage reference supply, external reference input / internal reference output); needs decoupling capacitor to VREF-/GND. |
| 44 | PA24 | bidirectional | Standard GPIO with ADC0 analog input 3 (UART2_RX, SPI0_CS2). |
| 45 | PA25 | bidirectional | Standard GPIO with ADC0 analog input 2 (UART3_RX, SPI1_CS3). |
| 46 | PA26 | bidirectional | Standard GPIO with ADC0 analog input 1 and GPAMP_IN+ (UART3_TX, SPI1_CS0, CAN_TX). |
| 47 | PA27 | bidirectional | Standard GPIO with ADC0 analog input 0 (RTC_OUT, SPI1_CS1, CAN_RX). |
| 48 | VCORE | power_out | Regulated core power supply output; connect only a 470 nF capacitor to VSS and apply no external voltage or load. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | TI(德州仪器) |
| Package | LQFP-48(7x7) |
| Category | |
| Pins | 48 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VDD | -0.3 | 4.1 | V | At VDD pin | 25 | |
| Input voltage, 5-V tolerant open-drain pins | VI | -0.3 | 5.5 | V | Applied to any 5-V tolerant open-drain pins | 25 | |
| Junction temperature | TJ | -40 | 130 | °C | Junction temperature | 25 | |
| Storage temperature | Tstg | -40 | 150 | °C | 25 | ||
| ESD HBM | V(ESD) | -2000 | 2000 | V | Human body model, AEC-Q100-002 | 25 | |
| Supply voltage | VDD | 1.62 | 3.6 | V | 25 | ||
| Ambient temperature, Q version | TA | -40 | 125 | °C | 25 | ||
| VDD capacitor | CVDD | 10 | uF | Between VDD and VSS | 25 | ||
| VCORE capacitor | CVCORE | 470 | nF | Between VCORE and VSS | 25 | ||
| Junction-to-ambient thermal resistance | RθJA | 70.7 | °C/W | LQFP-48 (PT) (Auto) | 27 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 27.3 | °C/W | LQFP-48 (PT) (Auto) | 27 | ||
| Junction-to-board thermal resistance | RθJB | 34.9 | °C/W | LQFP-48 (PT) (Auto) | 27 | ||
| Supply current in SHUTDOWN mode | IDDSHDN | 40 | 80 | nA | VDD=3.3V, 25°C column | 29 | |
| Power-on reset voltage level, rising | VPOR+ | 0.95 | 1.3 | 1.59 | V | Rising | 29 |
| Power-on reset voltage level, falling | VPOR- | 0.9 | 1.25 | 1.54 | V | Falling | 29 |
| POR hysteresis | VHYS, POR | 30 | 58 | 74 | mV | 29 | |
| Brown-out reset level 0, rising | VBOR0+ | 1.56 | 1.59 | 1.62 | V | Rising (1) | 30 |
| Brown-out reset level 0, falling | VBOR0- | 1.55 | 1.58 | 1.61 | V | Falling (1) | 30 |
| Program and erase supply voltage | VDDPGM/ERASE | 1.62 | 3.6 | V | 30 | ||
| Flash retention | tRET_85 | 60 | years | -40°C <= Tj <= 85°C | 30 | ||
| SYSOSC accuracy, FCL enabled, internal ROSC, 32MHz | fSYSOSC | -2.1 | 1.6 | % | SETUSEFCL=1 -40 ℃ ≤ Ta ≤ 125 ℃ | 32 | |
| LFOSC accuracy | LFOSC accuracy | -5 | 5 | % | -40 ℃ ≤ Ta ≤ 125 ℃ | 33 | |
| SYSPLL output frequency range | fSYSPLL | 2.5 | 200 | MHz | SYSPLLCLK0, SYSPLLCLK1 | 33 | |
| HFXT frequency | fHFXT | 4 | 8 | MHz | HFXTRSEL=00 | 34 | |
| High-level input voltage, ODIO | VIH | 2 | 5.5 | V | ODIO, VDD≥2.7V | 35 | |
| Low-level input voltage, ODIO | VIL | -0.3 | 0.8 | V | ODIO, VDD≥2.7V | 35 | |
| High-Z leakage current (all packages except PM) | Ilkg | 50 | nA | SDIO, 1.62V ≤ VDD ≤ 3.6V, -40 ℃ ≤ Ta ≤ 125 ℃ | 35 | ||
| Pull up resistance | RPU | 40 | kΩ | All I/O except ODIO | 35 | ||
| Pull down resistance | RPD | 40 | kΩ | 35 | |||
| Input capacitance | CI | 5 | pF | 35 | |||
| Low-level output voltage, SDIO | VOL | 0.45 | V | SDIO, -40 °C ≤Ta≤125 °C | 37 | ||
| ADC analog input voltage range | Vin(ADC) | 0 | V | Applies to all ADC analog input pins | 38 | ||
| ADC ENOB, external reference | ENOB | 10.9 | 11.1 | bit | f_in = 10KHz, External reference | 39 | |
| Supply Monitor accuracy | VSupplyMon | -1.5 | 1.5 | % | ADC input channel: Supply Monitor | 39 | |
| ADC INL | EI | -2 | 2 | LSB | External reference | 40 | |
| ADC DNL | ED | -1 | 1 | LSB | External reference | 40 | |
| ADC offset error | EO | -5 | 5 | mV | Internal or External reference | 40 | |
| ADC gain error | EG | -4 | 4 | LSB | External reference | 40 | |
| VREF output voltage | VREF | 1.38 | 1.4 | 1.42 | V | BUFCONFIG = 1 | 41 |
| VREF output voltage | VREF | 2.46 | 2.5 | 2.54 | V | BUFCONFIG = 0 | 41 |
| VREF operating supply current | IVREF | 189 | 330 | µA | BUFCONFIG = {0, 1}, No load | 41 | |
| Temperature sensor coefficient | TSc | -2.1 | -1.8 | -1.7 | mV/℃ | -40℃ ≤ Tj ≤ 130℃ | 41 |
| GPAMP input offset voltage | VOS | -9 | 9 | mV | CHOP = 0x0, Noninverting, unity gain, TA = 25℃, VDD = 3.3V | 42 |
CAD (KiCad official)
- Symbol:
M0G3107QPTRQ1 - Footprint:
Package_QFP:LQFP-48_7x7mm_P0.5mm - 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)
- 3D model files:
m0g3107qptrq1-etched.step/m0g3107qptrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);m0g3107qptrq1.step/m0g3107qptrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: TI(德州仪器) datasheet (119 pp, sha256
26a2af921de18f14, retrieved 2026-10-27, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).