Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

M0G3107QPTRQ1

TI(德州仪器) · IC · LQFP-48(7x7)

M0G3107QPTRQ1 from TI(德州仪器), in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 PA0 bidirectional 5V-tolerant open-drain GPIO with wake from SHUTDOWN (UART0_TX, I2C0_SDA, TIMA0_C0, FCC_IN), default BSL I2C data (BSLSDA); needs a pullup to output high.
2 PA1 bidirectional 5V-tolerant open-drain GPIO with wake from SHUTDOWN (UART0_RX, I2C0_SCL, TIMA0_C1), default BSL I2C clock (BSLSCL); needs a pullup to output high.
3 PA28 bidirectional High-drive GPIO with wake from SHUTDOWN (UART0_TX, I2C0_SDA, TIMA0_C3, TIMA_FAL0).
4 NRST input Active-low reset input; must be pulled high to VDD or the device cannot start.
5 PA31 bidirectional High-drive GPIO with wake from SHUTDOWN (UART0_RX, I2C0_SCL, CLK_OUT, TIMA0_C3N).
6 VDD power_in Power supply, 1.62 V to 3.6 V, with 10 µF decoupling to VSS.
7 VSS power_in Ground supply.
8 PA2/ROSC bidirectional Standard GPIO or ROSC external resistor pin (100 kΩ to VSS) improving SYSOSC accuracy; usable as GPIO when FCL is not used.
9 PA3 bidirectional Standard GPIO or input for the low-frequency crystal oscillator (LFXT); also SPI0_CS1, UART2_CTS, I2C1_SDA.
10 PA4 bidirectional Standard GPIO or output of the low-frequency crystal oscillator (LFXT) or LFCLK_IN digital clock input; also SPI0_POCI, UART2_RTS, I2C1_SCL.
11 PA5 bidirectional Standard GPIO or input for the high-frequency crystal oscillator (HFXT); also SPI0_PICO, FCC_IN.
12 PA6 bidirectional Standard GPIO or output of the high-frequency crystal oscillator (HFXT) or HFCLK_IN digital clock input; also SPI0_SCK.
13 PA7 bidirectional Standard GPIO with CLK_OUT, TIMG8_C0, TIMA0_C2 functions.
14 PB2 bidirectional Standard GPIO (UART3_TX, UART2_CTS, I2C1_SCL, TIMA0_C3).
15 PB3 bidirectional Standard GPIO (UART3_RX, UART2_RTS, I2C1_SDA, TIMA0_C3N).
16 PA8 bidirectional Standard GPIO (UART1_TX, SPI0_CS0, UART0_RTS, TIMA0_C0).
17 PA9 bidirectional High-speed GPIO (UART1_RX, SPI0_PICO, UART0_CTS, RTC_OUT, CLK_OUT).
18 PA10 bidirectional High-drive GPIO with wake from SHUTDOWN (UART0_TX, SPI0_POCI, I2C0_SDA, CLK_OUT); default BSL UART transmit (BSLTX).
19 PA11 bidirectional High-drive GPIO with wake from SHUTDOWN (UART0_RX, SPI0_SCK, I2C0_SCL); default BSL UART receive (BSLRX).
20 PB6 bidirectional Standard GPIO (UART1_TX, SPI1_CS0, SPI0_CS1, TIMG8_C0).
21 PB7 bidirectional Standard GPIO (UART1_RX, SPI1_POCI, SPI0_CS2, TIMG8_C1).
22 PB8 bidirectional Standard GPIO (UART1_CTS, SPI1_PICO, TIMA0_C0).
23 PB9 bidirectional Standard GPIO (UART1_RTS, SPI1_SCK, TIMA0_C1).
24 PB14 bidirectional Standard GPIO (SPI1_CS3, SPI1_POCI, SPI0_CS3, TIMG12_C1).
25 PB15 bidirectional Standard GPIO (UART2_TX, SPI1_PICO, UART3_CTS, TIMG8_C0).
26 PB16 bidirectional Standard GPIO (UART2_RX, SPI1_SCK, UART3_RTS, TIMG8_C1).
27 PA12 bidirectional High-speed GPIO (UART3_CTS, SPI0_SCK, CAN_TX, FCC_IN).
28 PA13 bidirectional High-speed GPIO (UART3_RTS, SPI0_POCI, UART3_RX, CAN_RX).
29 PA14 bidirectional High-speed GPIO with ADC0 analog input 12 (UART0_CTS, SPI0_PICO, UART3_TX, CLK_OUT).
30 PA15 bidirectional Standard GPIO with ADC1 analog input 0 (UART0_RTS, SPI1_CS2, I2C1_SCL).
31 PA16 bidirectional Standard GPIO with ADC1 analog input 1 (SPI1_POCI, I2C1_SDA, FCC_IN).
32 PA17 bidirectional Standard GPIO with wake from SHUTDOWN and ADC1 analog input 2 (UART1_TX, SPI1_SCK, I2C1_SCL).
33 PA18 bidirectional Standard GPIO with wake from SHUTDOWN, ADC1 analog input 3, GPAMP_IN- and BSL_invoke input.
34 PA19 bidirectional High-speed GPIO, serial wire debug data input/output (SWDIO).
35 PA20 input Standard GPIO, serial wire debug input clock (SWCLK).
36 PB17 bidirectional Standard GPIO with ADC1 analog input 4 (UART2_TX, SPI0_PICO, SPI1_CS1).
37 PB18 bidirectional Standard GPIO with ADC1 analog input 5 (UART2_RX, SPI0_SCK, SPI1_CS2).
38 PB19 bidirectional Standard GPIO with ADC1 analog input 6 (SPI0_POCI, TIMG8_C1, UART0_CTS).
39 PA21 bidirectional Standard GPIO with ADC1 analog input 7 and VREF- (voltage reference ground / external reference input); no injection current allowed on this pin.
40 PA22 bidirectional Standard GPIO with ADC0 analog input 7 and GPAMP_OUT (UART2_RX, CLK_OUT).
41 PB20 bidirectional Standard GPIO with ADC0 analog input 6 (SPI0_CS2, SPI1_CS0, TIMA0_C2).
42 PB24 bidirectional Standard GPIO with ADC0 analog input 5 (SPI0_CS3, SPI0_CS1, TIMA0_C3).
43 PA23 bidirectional Standard GPIO or VREF+ (voltage reference supply, external reference input / internal reference output); needs decoupling capacitor to VREF-/GND.
44 PA24 bidirectional Standard GPIO with ADC0 analog input 3 (UART2_RX, SPI0_CS2).
45 PA25 bidirectional Standard GPIO with ADC0 analog input 2 (UART3_RX, SPI1_CS3).
46 PA26 bidirectional Standard GPIO with ADC0 analog input 1 and GPAMP_IN+ (UART3_TX, SPI1_CS0, CAN_TX).
47 PA27 bidirectional Standard GPIO with ADC0 analog input 0 (RTC_OUT, SPI1_CS1, CAN_RX).
48 VCORE power_out Regulated core power supply output; connect only a 470 nF capacitor to VSS and apply no external voltage or load.

Key specifications

Parameter Value
Manufacturer TI(德州仪器)
Package LQFP-48(7x7)
Category
Pins 48

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VDD -0.3 4.1 V At VDD pin 25
Input voltage, 5-V tolerant open-drain pins VI -0.3 5.5 V Applied to any 5-V tolerant open-drain pins 25
Junction temperature TJ -40 130 °C Junction temperature 25
Storage temperature Tstg -40 150 °C 25
ESD HBM V(ESD) -2000 2000 V Human body model, AEC-Q100-002 25
Supply voltage VDD 1.62 3.6 V 25
Ambient temperature, Q version TA -40 125 °C 25
VDD capacitor CVDD 10 uF Between VDD and VSS 25
VCORE capacitor CVCORE 470 nF Between VCORE and VSS 25
Junction-to-ambient thermal resistance RθJA 70.7 °C/W LQFP-48 (PT) (Auto) 27
Junction-to-case (top) thermal resistance RθJC(top) 27.3 °C/W LQFP-48 (PT) (Auto) 27
Junction-to-board thermal resistance RθJB 34.9 °C/W LQFP-48 (PT) (Auto) 27
Supply current in SHUTDOWN mode IDDSHDN 40 80 nA VDD=3.3V, 25°C column 29
Power-on reset voltage level, rising VPOR+ 0.95 1.3 1.59 V Rising 29
Power-on reset voltage level, falling VPOR- 0.9 1.25 1.54 V Falling 29
POR hysteresis VHYS, POR 30 58 74 mV 29
Brown-out reset level 0, rising VBOR0+ 1.56 1.59 1.62 V Rising (1) 30
Brown-out reset level 0, falling VBOR0- 1.55 1.58 1.61 V Falling (1) 30
Program and erase supply voltage VDDPGM/ERASE 1.62 3.6 V 30
Flash retention tRET_85 60 years -40°C <= Tj <= 85°C 30
SYSOSC accuracy, FCL enabled, internal ROSC, 32MHz fSYSOSC -2.1 1.6 % SETUSEFCL=1 -40 ℃ ≤ Ta ≤ 125 ℃ 32
LFOSC accuracy LFOSC accuracy -5 5 % -40 ℃ ≤ Ta ≤ 125 ℃ 33
SYSPLL output frequency range fSYSPLL 2.5 200 MHz SYSPLLCLK0, SYSPLLCLK1 33
HFXT frequency fHFXT 4 8 MHz HFXTRSEL=00 34
High-level input voltage, ODIO VIH 2 5.5 V ODIO, VDD≥2.7V 35
Low-level input voltage, ODIO VIL -0.3 0.8 V ODIO, VDD≥2.7V 35
High-Z leakage current (all packages except PM) Ilkg 50 nA SDIO, 1.62V ≤ VDD ≤ 3.6V, -40 ℃ ≤ Ta ≤ 125 ℃ 35
Pull up resistance RPU 40 kΩ All I/O except ODIO 35
Pull down resistance RPD 40 kΩ 35
Input capacitance CI 5 pF 35
Low-level output voltage, SDIO VOL 0.45 V SDIO, -40 °C ≤Ta≤125 °C 37
ADC analog input voltage range Vin(ADC) 0 V Applies to all ADC analog input pins 38
ADC ENOB, external reference ENOB 10.9 11.1 bit f_in = 10KHz, External reference 39
Supply Monitor accuracy VSupplyMon -1.5 1.5 % ADC input channel: Supply Monitor 39
ADC INL EI -2 2 LSB External reference 40
ADC DNL ED -1 1 LSB External reference 40
ADC offset error EO -5 5 mV Internal or External reference 40
ADC gain error EG -4 4 LSB External reference 40
VREF output voltage VREF 1.38 1.4 1.42 V BUFCONFIG = 1 41
VREF output voltage VREF 2.46 2.5 2.54 V BUFCONFIG = 0 41
VREF operating supply current IVREF 189 330 µA BUFCONFIG = {0, 1}, No load 41
Temperature sensor coefficient TSc -2.1 -1.8 -1.7 mV/℃ -40℃ ≤ Tj ≤ 130℃ 41
GPAMP input offset voltage VOS -9 9 mV CHOP = 0x0, Noninverting, unity gain, TA = 25℃, VDD = 3.3V 42

CAD (KiCad official)

  • Symbol: M0G3107QPTRQ1
  • Footprint: Package_QFP:LQFP-48_7x7mm_P0.5mm
  • 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)
  • 3D model files: m0g3107qptrq1-etched.step / m0g3107qptrq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); m0g3107qptrq1.step / m0g3107qptrq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: TI(德州仪器) datasheet (119 pp, sha256 26a2af921de18f14, retrieved 2026-10-27, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF