main
Ray
Publish 0.1.1
bcfa9ff
1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374757677787980818283848586878889909192939495969798991001011021031041051061071081091101111121131141151161171181191201211221231241251261271281291301311321331341351361371381391401411421431441451461471481491501511521531541551561571581591601611621631641651661671681691701711721731741751761771781791801811821831841851861871881891901911921931941951961971981992002012022032042052062072082092102112122132142152162172182192202212222232242252262272282292302312322332342352362372382392402412422432442452462472482492502512522532542552562572582592602612622632642652662672682692702712722732742752762772782792802812822832842852862872882892902912922932942952962972982993003013023033043053063073083093103113123133143153163173183193203213223233243253263273283293303313323333343353363373383393403413423433443453463473483493503513523533543553563573583593603613623633643653663673683693703713723733743753763773783793803813823833843853863873883893903913923933943953963973983994004014024034044054064074084094104114124134144154164174184194204214224234244254264274284294304314324334344354364374384394404414424434444454464474484494504514524534544554564574584594604614624634644654664674684694704714724734744754764774784794804814824834844854864874884894904914924934944954964974984995005015025035045055065075085095105115125135145155165175185195205215225235245255265275285295305315325335345355365375385395405415425435445455465475485495505515525535545555565575585595605615625635645655665675685695705715725735745755765775785795805815825835845855865875885895905915925935945955965975985996006016026036046056066076086096106116126136146156166176186196206216226236246256266276286296306316326336346356366376386396406416426436446456466476486496506516526536546556566576586596606616626636646656666676686696706716726736746756766776786796806816826836846856866876886896906916926936946956966976986997007017027037047057067077087097107117127137147157167177187197207217227237247257267277287297307317327337347357367377387397407417427437447457467477487497507517527537547557567577587597607617627637647657667677687697707717727737747757767777787797807817827837847857867877887897907917927937947957967977987998008018028038048058068078088098108118128138148158168178188198208218228238248258268278288298308318328338348358368378388398408418428438448458468478488498508518528538548558568578588598608618628638648658668678688698708718728738748758768778788798808818828838848858868878888898908918928938948958968978988999009019029039049059069079089099109119129139149159169179189199209219229239249259269279289299309319329339349359369379389399409419429439449459469479489499509519529539549559569579589599609619629639649659669679689699709719729739749759769779789799809819829839849859869879889899909919929939949959969979989991000100110021003100410051006100710081009101010111012101310141015101610171018101910201021102210231024102510261027102810291030103110321033103410351036103710381039104010411042104310441045104610471048104910501051105210531054105510561057105810591060106110621063106410651066106710681069107010711072107310741075107610771078107910801081108210831084108510861087108810891090109110921093109410951096109710981099110011011102110311041105110611071108110911101111111211131114111511161117111811191120112111221123112411251126112711281129113011311132113311341135113611371138113911401141114211431144114511461147114811491150115111521153115411551156115711581159116011611162116311641165116611671168116911701171117211731174117511761177117811791180118111821183118411851186118711881189119011911192119311941195119611971198119912001201120212031204120512061207120812091210121112121213121412151216121712181219122012211222122312241225122612271228122912301231123212331234123512361237123812391240124112421243124412451246124712481249125012511252125312541255125612571258125912601261126212631264126512661267126812691270127112721273127412751276127712781279128012811282
{
"schema_version": 1,
"type": "component",
"slug": "ltm8001iy-pbf",
"title": "LTM8001IY#PBF",
"brief": "Analog Devices DC-DC Converters, BGA-121. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"version": "0.1.1",
"license": "CC-BY-SA-4.0",
"tags": [
"component",
"power supply chip",
"ltm8001iy#pbf",
"factory-2.0.0",
"extractor-text"
],
"component": {
"mpn": "LTM8001IY#PBF",
"manufacturer": "Analog Devices",
"package": "BGA-121",
"pin_count": 121,
"category": "Power Supply Chip",
"subcategory": "DC-DC Converters",
"datasheet": "https://www.analog.com/media/en/technical-documentation/data-sheets/ltm8001.pdf",
"parts": {
"symbol": "ltm8001iy-pbf.kicad_sym",
"footprint": "ltm8001iy-pbf.kicad_mod",
"model_3d": "ltm8001iy-pbf-hero.glb",
"model_3d_plain": "ltm8001iy-pbf.glb",
"model_3d_step": "ltm8001iy-pbf-etched.step",
"model_3d_step_plain": "ltm8001iy-pbf.step",
"lbr": "ltm8001iy-pbf.lbr"
},
"distributor_links": {
"lcsc": "C690618",
"digikey": "505-LTM8001IY#PBF-ND",
"mouser": "584-LTM8001IY#PBF"
},
"distributor_check": {
"checked_at": "2026-11-02T16:48:55Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "505-LTM8001IY#PBF-ND",
"status": "found"
},
"mouser": {
"pn": "584-LTM8001IY#PBF",
"status": "found"
}
},
"pins": [
{
"number": "A1",
"name": "GND",
"type": "power_in",
"description": "Tie to a local ground plane; most module heat flows out through these pads."
},
{
"number": "B1",
"name": "GND",
"type": "power_in",
"description": "Tie to a local ground plane; most module heat flows out through these pads."
},
{
"number": "C1",
"name": "GND",
"type": "power_in",
"description": "Tie to a local ground plane; most module heat flows out through these pads."
},
{
"number": "D1",
"name": "GND",
"type": "power_in",
"description": "Tie to a local ground plane; most module heat flows out through these pads."
},
{
"number": "E1",
"name": "GND",
"type": "power_in",
"description": "Tie to a local ground plane; most module heat flows out through these pads."
},
{
"number": "F1",
"name": "GND",
"type": "power_in",
"description": "Tie to a local ground plane; most module heat flows out through these pads."
},
{
"number": "G1",
"name": "GND",
"type": "power_in",
"description": "Tie to a local ground plane; most module heat flows out through these pads."
},
{
"number": "H1",
"name": "GND",
"type": "power_in",
"description": "Tie to a local ground plane; most module heat flows out through these pads."
},
{
"number": "J1",
"name": "VIN0",
"type": "power_in",
"description": "Supplies the internal regulator and power switches; must be locally bypassed with a low ESR capacitor."
},
{
"number": "K1",
"name": "VIN0",
"type": "power_in",
"description": "Supplies the internal regulator and power switches; must be locally bypassed with a low ESR capacitor."
},
{
"number": "L1",
"name": "VIN0",
"type": "power_in",
"description": "Supplies the internal regulator and power switches; must be locally bypassed with a low ESR capacitor."
},
{
"number": "A2",
"name": "GND",
"type": "power_in",
"description": "Tie to a local ground plane; most module heat flows out through these pads."
},
{
"number": "B2",
"name": "GND",
"type": "power_in",
"description": "Tie to a local ground plane; most module heat flows out through these pads."
},
{
"number": "C2",
"name": "GND",
"type": "power_in",
"description": "Tie to a local ground plane; most module heat flows out through these pads."
},
{
"number": "D2",
"name": "GND",
"type": "power_in",
"description": "Tie to a local ground plane; most module heat flows out through these pads."
},
{
"number": "E2",
"name": "GND",
"type": "power_in",
"description": "Tie to a local ground plane; most module heat flows out through these pads."
},
{
"number": "F2",
"name": "GND",
"type": "power_in",
"description": "Tie to a local ground plane; most module heat flows out through these pads."
},
{
"number": "G2",
"name": "GND",
"type": "power_in",
"description": "Tie to a local ground plane; most module heat flows out through these pads."
},
{
"number": "H2",
"name": "GND",
"type": "power_in",
"description": "Tie to a local ground plane; most module heat flows out through these pads."
},
{
"number": "J2",
"name": "VIN0",
"type": "power_in",
"description": "Supplies the internal regulator and power switches; must be locally bypassed with a low ESR capacitor."
},
{
"number": "K2",
"name": "VIN0",
"type": "power_in",
"description": "Supplies the internal regulator and power switches; must be locally bypassed with a low ESR capacitor."
},
{
"number": "L2",
"name": "VIN0",
"type": "power_in",
"description": "Supplies the internal regulator and power switches; must be locally bypassed with a low ESR capacitor."
},
{
"number": "A3",
"name": "VOUT0",
"type": "power_out",
"description": "Switching converter output; apply the output filter capacitor and load between these pins and GND."
},
{
"number": "B3",
"name": "VOUT0",
"type": "power_out",
"description": "Switching converter output; apply the output filter capacitor and load between these pins and GND."
},
{
"number": "C3",
"name": "VOUT0",
"type": "power_out",
"description": "Switching converter output; apply the output filter capacitor and load between these pins and GND."
},
{
"number": "D3",
"name": "GND",
"type": "power_in",
"description": "Tie to a local ground plane; most module heat flows out through these pads."
},
{
"number": "E3",
"name": "GND",
"type": "power_in",
"description": "Tie to a local ground plane; most module heat flows out through these pads."
},
{
"number": "F3",
"name": "GND",
"type": "power_in",
"description": "Tie to a local ground plane; most module heat flows out through these pads."
},
{
"number": "G3",
"name": "GND",
"type": "power_in",
"description": "Tie to a local ground plane; most module heat flows out through these pads."
},
{
"number": "H3",
"name": "GND",
"type": "power_in",
"description": "Tie to a local ground plane; most module heat flows out through these pads."
},
{
"number": "J3",
"name": "VIN0",
"type": "power_in",
"description": "Supplies the internal regulator and power switches; must be locally bypassed with a low ESR capacitor."
},
{
"number": "K3",
"name": "VIN0",
"type": "power_in",
"description": "Supplies the internal regulator and power switches; must be locally bypassed with a low ESR capacitor."
},
{
"number": "L3",
"name": "VIN0",
"type": "power_in",
"description": "Supplies the internal regulator and power switches; must be locally bypassed with a low ESR capacitor."
},
{
"number": "A4",
"name": "VOUT0",
"type": "power_out",
"description": "Switching converter output; apply the output filter capacitor and load between these pins and GND."
},
{
"number": "B4",
"name": "VOUT0",
"type": "power_out",
"description": "Switching converter output; apply the output filter capacitor and load between these pins and GND."
},
{
"number": "C4",
"name": "VOUT0",
"type": "power_out",
"description": "Switching converter output; apply the output filter capacitor and load between these pins and GND."
},
{
"number": "D4",
"name": "GND",
"type": "power_in",
"description": "Tie to a local ground plane; most module heat flows out through these pads."
},
{
"number": "E4",
"name": "GND",
"type": "power_in",
"description": "Tie to a local ground plane; most module heat flows out through these pads."
},
{
"number": "F4",
"name": "GND",
"type": "power_in",
"description": "Tie to a local ground plane; most module heat flows out through these pads."
},
{
"number": "G4",
"name": "GND",
"type": "power_in",
"description": "Tie to a local ground plane; most module heat flows out through these pads."
},
{
"number": "H4",
"name": "GND",
"type": "power_in",
"description": "Tie to a local ground plane; most module heat flows out through these pads."
},
{
"number": "J4",
"name": "GND",
"type": "power_in",
"description": "Tie to a local ground plane; most module heat flows out through these pads."
},
{
"number": "K4",
"name": "SS",
"type": "passive",
"description": "Soft-start pin; an external capacitor to ground limits regulated current during start-up, charged with an 11μA source."
},
{
"number": "L4",
"name": "RUN",
"type": "input",
"description": "Enable pin with no internal pull-up or pull-down; internally clamped, may be pulled up through a resistor if pin current does not exceed 100µA."
},
{
"number": "A5",
"name": "VOUT0",
"type": "power_out",
"description": "Switching converter output; apply the output filter capacitor and load between these pins and GND."
},
{
"number": "B5",
"name": "VOUT0",
"type": "power_out",
"description": "Switching converter output; apply the output filter capacitor and load between these pins and GND."
},
{
"number": "C5",
"name": "VOUT0",
"type": "power_out",
"description": "Switching converter output; apply the output filter capacitor and load between these pins and GND."
},
{
"number": "D5",
"name": "GND",
"type": "power_in",
"description": "Tie to a local ground plane; most module heat flows out through these pads."
},
{
"number": "E5",
"name": "GND",
"type": "power_in",
"description": "Tie to a local ground plane; most module heat flows out through these pads."
},
{
"number": "F5",
"name": "GND",
"type": "power_in",
"description": "Tie to a local ground plane; most module heat flows out through these pads."
},
{
"number": "G5",
"name": "GND",
"type": "power_in",
"description": "Tie to a local ground plane; most module heat flows out through these pads."
},
{
"number": "H5",
"name": "GND",
"type": "power_in",
"description": "Tie to a local ground plane; most module heat flows out through these pads."
},
{
"number": "J5",
"name": "GND",
"type": "power_in",
"description": "Tie to a local ground plane; most module heat flows out through these pads."
},
{
"number": "K5",
"name": "GND",
"type": "power_in",
"description": "Tie to a local ground plane; most module heat flows out through these pads."
},
{
"number": "L5",
"name": "FB0",
"type": "input",
"description": "Regulates the FB0 pin to 1.19V; the feedback resistor RFB0 connects from this pin to ground, with RFB0 in kΩ = 11.9/(VOUT - 1.19)."
},
{
"number": "A6",
"name": "VIN45",
"type": "power_in",
"description": "Input to the LDOs connected to VOUT4 and VOUT5; must be locally bypassed with a low ESR capacitor."
},
{
"number": "B6",
"name": "VIN45",
"type": "power_in",
"description": "Input to the LDOs connected to VOUT4 and VOUT5; must be locally bypassed with a low ESR capacitor."
},
{
"number": "C6",
"name": "VIN45",
"type": "power_in",
"description": "Input to the LDOs connected to VOUT4 and VOUT5; must be locally bypassed with a low ESR capacitor."
},
{
"number": "D6",
"name": "GND",
"type": "power_in",
"description": "Tie to a local ground plane; most module heat flows out through these pads."
},
{
"number": "E6",
"name": "GND",
"type": "power_in",
"description": "Tie to a local ground plane; most module heat flows out through these pads."
},
{
"number": "F6",
"name": "GND",
"type": "power_in",
"description": "Tie to a local ground plane; most module heat flows out through these pads."
},
{
"number": "G6",
"name": "GND",
"type": "power_in",
"description": "Tie to a local ground plane; most module heat flows out through these pads."
},
{
"number": "H6",
"name": "GND",
"type": "power_in",
"description": "Tie to a local ground plane; most module heat flows out through these pads."
},
{
"number": "J6",
"name": "GND",
"type": "power_in",
"description": "Tie to a local ground plane; most module heat flows out through these pads."
},
{
"number": "K6",
"name": "GND",
"type": "power_in",
"description": "Tie to a local ground plane; most module heat flows out through these pads."
},
{
"number": "L6",
"name": "COMP",
"type": "passive",
"description": "Internal compensation pin that connects to the PWM comparator input; leave open if not used."
},
{
"number": "A7",
"name": "VIN45",
"type": "power_in",
"description": "Input to the LDOs connected to VOUT4 and VOUT5; must be locally bypassed with a low ESR capacitor."
},
{
"number": "B7",
"name": "VIN45",
"type": "power_in",
"description": "Input to the LDOs connected to VOUT4 and VOUT5; must be locally bypassed with a low ESR capacitor."
},
{
"number": "C7",
"name": "VIN45",
"type": "power_in",
"description": "Input to the LDOs connected to VOUT4 and VOUT5; must be locally bypassed with a low ESR capacitor."
},
{
"number": "D7",
"name": "GND",
"type": "power_in",
"description": "Tie to a local ground plane; most module heat flows out through these pads."
},
{
"number": "E7",
"name": "GND",
"type": "power_in",
"description": "Tie to a local ground plane; most module heat flows out through these pads."
},
{
"number": "F7",
"name": "GND",
"type": "power_in",
"description": "Tie to a local ground plane; most module heat flows out through these pads."
},
{
"number": "G7",
"name": "GND",
"type": "power_in",
"description": "Tie to a local ground plane; most module heat flows out through these pads."
},
{
"number": "H7",
"name": "GND",
"type": "power_in",
"description": "Tie to a local ground plane; most module heat flows out through these pads."
},
{
"number": "J7",
"name": "GND",
"type": "power_in",
"description": "Tie to a local ground plane; most module heat flows out through these pads."
},
{
"number": "K7",
"name": "SYNC",
"type": "input",
"description": "Frequency synchronization pin; set RT for a switching clock 20% slower than the SYNC pulse, and ground it when unused, never leaving it floating."
},
{
"number": "L7",
"name": "RT",
"type": "passive",
"description": "Programs the switching frequency through a resistor to ground; must not be left open, and is set 20% lower than the SYNC frequency when SYNC is used."
},
{
"number": "A8",
"name": "BIAS45",
"type": "power_in",
"description": "Supply for the control circuitry of the LDOs on VOUT4 and VOUT5; must be 1.2V to 1.6V above the output voltage for regulation."
},
{
"number": "B8",
"name": "BIAS123",
"type": "power_in",
"description": "Supply for the control circuitry of the LDOs on VOUT1-VOUT3; must be 1.2V to 1.6V above the output voltage for regulation."
},
{
"number": "C8",
"name": "GND",
"type": "power_in",
"description": "Tie to a local ground plane; most module heat flows out through these pads."
},
{
"number": "D8",
"name": "GND",
"type": "power_in",
"description": "Tie to a local ground plane; most module heat flows out through these pads."
},
{
"number": "E8",
"name": "GND",
"type": "power_in",
"description": "Tie to a local ground plane; most module heat flows out through these pads."
},
{
"number": "F8",
"name": "GND",
"type": "power_in",
"description": "Tie to a local ground plane; most module heat flows out through these pads."
},
{
"number": "G8",
"name": "GND",
"type": "power_in",
"description": "Tie to a local ground plane; most module heat flows out through these pads."
},
{
"number": "H8",
"name": "GND",
"type": "power_in",
"description": "Tie to a local ground plane; most module heat flows out through these pads."
},
{
"number": "J8",
"name": "GND",
"type": "power_in",
"description": "Tie to a local ground plane; most module heat flows out through these pads."
},
{
"number": "K8",
"name": "VREF",
"type": "power_out",
"description": "Buffered 2V reference capable of supplying 0.5mA drive."
},
{
"number": "L8",
"name": "ILIM",
"type": "input",
"description": "Reduces maximum regulated output current over a 0V to 1.5V control range; voltages above 1.5V have little effect and it should be tied to VREF if unused."
},
{
"number": "A9",
"name": "SET5",
"type": "passive",
"description": "Sets the LDO5 regulation point; a fixed 10μA flows out of this pin through a single resistor."
},
{
"number": "B9",
"name": "GND",
"type": "power_in",
"description": "Tie to a local ground plane; most module heat flows out through these pads."
},
{
"number": "C9",
"name": "GND",
"type": "power_in",
"description": "Tie to a local ground plane; most module heat flows out through these pads."
},
{
"number": "D9",
"name": "GND",
"type": "power_in",
"description": "Tie to a local ground plane; most module heat flows out through these pads."
},
{
"number": "E9",
"name": "GND",
"type": "power_in",
"description": "Tie to a local ground plane; most module heat flows out through these pads."
},
{
"number": "F9",
"name": "GND",
"type": "power_in",
"description": "Tie to a local ground plane; most module heat flows out through these pads."
},
{
"number": "G9",
"name": "GND",
"type": "power_in",
"description": "Tie to a local ground plane; most module heat flows out through these pads."
},
{
"number": "H9",
"name": "GND",
"type": "power_in",
"description": "Tie to a local ground plane; most module heat flows out through these pads."
},
{
"number": "J9",
"name": "GND",
"type": "power_in",
"description": "Tie to a local ground plane; most module heat flows out through these pads."
},
{
"number": "K9",
"name": "GND",
"type": "power_in",
"description": "Tie to a local ground plane; most module heat flows out through these pads."
},
{
"number": "L9",
"name": "SET1",
"type": "passive",
"description": "Sets the LDO1 regulation point; a fixed 10μA flows out of this pin through a single resistor."
},
{
"number": "A10",
"name": "VOUT5",
"type": "power_out",
"description": "Power output of LDO5; must carry at least 1mA minimum load or the output may not regulate."
},
{
"number": "B10",
"name": "GND",
"type": "power_in",
"description": "Tie to a local ground plane; most module heat flows out through these pads."
},
{
"number": "C10",
"name": "GND",
"type": "power_in",
"description": "Tie to a local ground plane; most module heat flows out through these pads."
},
{
"number": "D10",
"name": "GND",
"type": "power_in",
"description": "Tie to a local ground plane; most module heat flows out through these pads."
},
{
"number": "E10",
"name": "GND",
"type": "power_in",
"description": "Tie to a local ground plane; most module heat flows out through these pads."
},
{
"number": "F10",
"name": "GND",
"type": "power_in",
"description": "Tie to a local ground plane; most module heat flows out through these pads."
},
{
"number": "G10",
"name": "GND",
"type": "power_in",
"description": "Tie to a local ground plane; most module heat flows out through these pads."
},
{
"number": "H10",
"name": "GND",
"type": "power_in",
"description": "Tie to a local ground plane; most module heat flows out through these pads."
},
{
"number": "J10",
"name": "GND",
"type": "power_in",
"description": "Tie to a local ground plane; most module heat flows out through these pads."
},
{
"number": "K10",
"name": "GND",
"type": "power_in",
"description": "Tie to a local ground plane; most module heat flows out through these pads."
},
{
"number": "L10",
"name": "VOUT1",
"type": "power_out",
"description": "Power output of LDO1; must carry at least 1mA minimum load or the output may not regulate."
},
{
"number": "A11",
"name": "VOUT5",
"type": "power_out",
"description": "Power output of LDO5; must carry at least 1mA minimum load or the output may not regulate."
},
{
"number": "B11",
"name": "VOUT4",
"type": "power_out",
"description": "Power output of LDO4; must carry at least 1mA minimum load or the output may not regulate."
},
{
"number": "C11",
"name": "VOUT4",
"type": "power_out",
"description": "Power output of LDO4; must carry at least 1mA minimum load or the output may not regulate."
},
{
"number": "D11",
"name": "SET4",
"type": "passive",
"description": "Sets the LDO4 regulation point; a fixed 10μA flows out of this pin through a single resistor."
},
{
"number": "E11",
"name": "VOUT3",
"type": "power_out",
"description": "Power output of LDO3; must carry at least 1mA minimum load or the output may not regulate."
},
{
"number": "F11",
"name": "VOUT3",
"type": "power_out",
"description": "Power output of LDO3; must carry at least 1mA minimum load or the output may not regulate."
},
{
"number": "G11",
"name": "SET3",
"type": "passive",
"description": "Sets the LDO3 regulation point; a fixed 10μA flows out of this pin through a single resistor."
},
{
"number": "H11",
"name": "SET2",
"type": "passive",
"description": "Sets the LDO2 regulation point; a fixed 10μA flows out of this pin through a single resistor."
},
{
"number": "J11",
"name": "VOUT2",
"type": "power_out",
"description": "Power output of LDO2; must carry at least 1mA minimum load or the output may not regulate."
},
{
"number": "K11",
"name": "VOUT2",
"type": "power_out",
"description": "Power output of LDO2; must carry at least 1mA minimum load or the output may not regulate."
},
{
"number": "L11",
"name": "VOUT1",
"type": "power_out",
"description": "Power output of LDO1; must carry at least 1mA minimum load or the output may not regulate."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: Pinout taken from Table 3 (page 26), which covers all 121 balls of the BGA package used by LTM8001IY",
"96/121 pins cited to the wrong page (name found elsewhere): ['A1:GND@p9', 'B1:GND@p9', 'C1:GND@p9', 'D1:GND@p9']"
],
"pages_sent": 16,
"cost_usd": 0.0721,
"at": "2026-11-02T16:48:39"
},
"datasheet": {
"url": "https://www.analog.com/media/en/technical-documentation/data-sheets/ltm8001.pdf",
"pages": 28,
"sha256": "772b849c19b80ff3",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 121,
"described": 121,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "ltm8001iy-pbf.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
9,
9,
1.112
],
"zmin_mm": -0.01,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "8da48d27804a2e36a4eccc28349fa8bbe4edb4cdcc7ec213934cac35ca478f69",
"checked": "2026-11-02",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "ltm8001iy-pbf-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
9,
9,
1.112
],
"zmin_mm": -0.01,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "cb8ffb0c041f4d543f553676bebdc139d1599ff381cd5422111832f66a36c057",
"checked": "2026-11-02",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
},
"metadata": {
"specs": {
"Manufacturer": "Analog Devices",
"Package": "BGA-121",
"Category": "Power Supply Chip",
"Pins": "121"
},
"characteristics": {
"version": 1,
"source": "datasheet",
"datasheet_sha256": "772b849c19b80ff3c9bd437146e12f265b8519d4830aee8a60f8a100d66adea0",
"rows": [
{
"name": "Voltage at FB0 Pin",
"symbol": "",
"kind": "electrical",
"unit": "V",
"min": 1.15,
"typ": 1.19,
"max": 1.21,
"conditions": "",
"source_page": 3,
"source": "datasheet"
},
{
"name": "ILIM Control Range",
"symbol": "",
"kind": "electrical",
"unit": "V",
"min": 0,
"typ": null,
"max": 1.5,
"conditions": "",
"source_page": 3,
"source": "datasheet"
},
{
"name": "ILIM Current Limit Accuracy",
"symbol": "",
"kind": "electrical",
"unit": "A",
"min": 5.1,
"typ": null,
"max": 6.4,
"conditions": "ILIM = 1.5V",
"source_page": 3,
"source": "datasheet"
},
{
"name": "ILIM Current Limit Accuracy",
"symbol": "",
"kind": "electrical",
"unit": "A",
"min": 2.5,
"typ": null,
"max": 3.4,
"conditions": "ILIM = 0.75V",
"source_page": 3,
"source": "datasheet"
},
{
"name": "VREF Voltage",
"symbol": "",
"kind": "electrical",
"unit": "V",
"min": 1.9,
"typ": 2,
"max": 2.1,
"conditions": "0.5mA Load",
"source_page": 3,
"source": "datasheet"
},
{
"name": "SYNC Input Low Threshold",
"symbol": "",
"kind": "electrical",
"unit": "V",
"min": null,
"typ": null,
"max": 0.8,
"conditions": "fSYNC = 500kHz",
"source_page": 3,
"source": "datasheet"
},
{
"name": "SYNC Input High Threshold",
"symbol": "",
"kind": "electrical",
"unit": "V",
"min": 1.2,
"typ": null,
"max": null,
"conditions": "fSYNC = 500kHz",
"source_page": 3,
"source": "datasheet"
},
{
"name": "SYNC Input Current",
"symbol": "",
"kind": "electrical",
"unit": "µA",
"min": -0.1,
"typ": null,
"max": 0.1,
"conditions": "SYNC = 0V, SYNC = 2V",
"source_page": 3,
"source": "datasheet"
},
{
"name": "VOUT0 Line Regulation",
"symbol": "",
"kind": "electrical",
"unit": "%",
"min": -0.5,
"typ": null,
"max": 0.5,
"conditions": "6V < VIN0 < 36V, IOUT = 1A",
"source_page": 3,
"source": "datasheet"
},
{
"name": "VOUT0 Load Regulation",
"symbol": "",
"kind": "electrical",
"unit": "%",
"min": -1.2,
"typ": null,
"max": 1.2,
"conditions": "VIN0 = 24V, 0A < IOUT < 5A",
"source_page": 3,
"source": "datasheet"
},
{
"name": "SET1-5 Pin Current",
"symbol": "",
"kind": "electrical",
"unit": "µA",
"min": 9.8,
"typ": 10,
"max": 10.2,
"conditions": "BIAS123 = BIAS45 = 2V, SETx = 0V, IOUT1-5 = 1mA",
"source_page": 3,
"source": "datasheet"
},
{
"name": "VOUTx – SETx Offset Voltage",
"symbol": "",
"kind": "electrical",
"unit": "mV",
"min": -4,
"typ": null,
"max": 4,
"conditions": "BIAS123 = BIAS45 = 2V, SETx = 0V, IOUT1-5 = 1mA",
"source_page": 3,
"source": "datasheet"
},
{
"name": "VOUTx – SETx Offset Voltage",
"symbol": "",
"kind": "electrical",
"unit": "mV",
"min": -6.5,
"typ": null,
"max": 6.5,
"conditions": "BIAS123 = BIAS45 = 2V, SETx = 0V, IOUT1-5 = 1mA",
"source_page": 3,
"source": "datasheet"
},
{
"name": "Minimum VIN0 Input Voltage",
"symbol": "",
"kind": "electrical",
"unit": "V",
"min": 6,
"typ": null,
"max": null,
"conditions": "",
"source_page": 3,
"source": "datasheet"
},
{
"name": "VIN0 to VOUT0 Absolute Max Input Voltage",
"symbol": "VIN0",
"kind": "absolute_maximum",
"unit": "V",
"min": null,
"typ": null,
"max": 40,
"conditions": "",
"source_page": 2,
"source": "datasheet"
},
{
"name": "VIN45, BIAS45 Absolute Max Voltage",
"symbol": "VIN45, BIAS45",
"kind": "absolute_maximum",
"unit": "V",
"min": null,
"typ": null,
"max": 25,
"conditions": "",
"source_page": 2,
"source": "datasheet"
},
{
"name": "BIAS123 Absolute Max Voltage",
"symbol": "BIAS123",
"kind": "absolute_maximum",
"unit": "V",
"min": null,
"typ": null,
"max": 25,
"conditions": "",
"source_page": 2,
"source": "datasheet"
},
{
"name": "FB0, RT, COMP, ILIM, VREF Absolute Max Voltage",
"symbol": "",
"kind": "absolute_maximum",
"unit": "V",
"min": null,
"typ": null,
"max": 3,
"conditions": "",
"source_page": 2,
"source": "datasheet"
},
{
"name": "VOUT0-5 Absolute Max Voltage",
"symbol": "VOUT0-5",
"kind": "absolute_maximum",
"unit": "V",
"min": null,
"typ": null,
"max": 25,
"conditions": "",
"source_page": 2,
"source": "datasheet"
},
{
"name": "RUN, SYNC, SS Absolute Max Voltage",
"symbol": "",
"kind": "absolute_maximum",
"unit": "V",
"min": null,
"typ": null,
"max": 6,
"conditions": "",
"source_page": 2,
"source": "datasheet"
},
{
"name": "SET1-5 Voltage Relative to VOUT1-5",
"symbol": "SET1-5",
"kind": "absolute_maximum",
"unit": "V",
"min": -0.3,
"typ": null,
"max": 0.3,
"conditions": "Relative to VOUT1-5, respectively",
"source_page": 2,
"source": "datasheet"
},
{
"name": "Current Into SET1-5",
"symbol": "",
"kind": "absolute_maximum",
"unit": "mA",
"min": -10,
"typ": null,
"max": 10,
"conditions": "",
"source_page": 2,
"source": "datasheet"
},
{
"name": "Current Into RUN Pin",
"symbol": "",
"kind": "absolute_maximum",
"unit": "µA",
"min": null,
"typ": null,
"max": 100,
"conditions": "",
"source_page": 2,
"source": "datasheet"
},
{
"name": "Maximum Junction Temperature",
"symbol": "TJMAX",
"kind": "absolute_maximum",
"unit": "°C",
"min": null,
"typ": null,
"max": 125,
"conditions": "Notes 2, 3",
"source_page": 2,
"source": "datasheet"
},
{
"name": "Peak Solder Reflow Body Temperature",
"symbol": "",
"kind": "absolute_maximum",
"unit": "°C",
"min": null,
"typ": null,
"max": 245,
"conditions": "",
"source_page": 2,
"source": "datasheet"
},
{
"name": "Storage Temperature",
"symbol": "",
"kind": "absolute_maximum",
"unit": "°C",
"min": -55,
"typ": null,
"max": 125,
"conditions": "Note 1",
"source_page": 2,
"source": "datasheet"
},
{
"name": "Operating Temperature Range (I grade)",
"symbol": "",
"kind": "recommended_operating",
"unit": "°C",
"min": -40,
"typ": null,
"max": 125,
"conditions": "Internal operating temperature, LTM8001IY#PBF",
"source_page": 2,
"source": "datasheet"
},
{
"name": "Junction-to-Ambient Thermal Resistance",
"symbol": "θJA",
"kind": "thermal",
"unit": "°C/W",
"min": null,
"typ": 16.1,
"max": null,
"conditions": "JESD 51-9, 51-12",
"source_page": 2,
"source": "datasheet"
},
{
"name": "Junction-to-Bottom Case Thermal Resistance",
"symbol": "θJCbottom",
"kind": "thermal",
"unit": "°C/W",
"min": null,
"typ": 5.99,
"max": null,
"conditions": "JESD 51-9, 51-12",
"source_page": 2,
"source": "datasheet"
},
{
"name": "Junction-to-Top Case Thermal Resistance",
"symbol": "θJCtop",
"kind": "thermal",
"unit": "°C/W",
"min": null,
"typ": 13.4,
"max": null,
"conditions": "JESD 51-9, 51-12",
"source_page": 2,
"source": "datasheet"
},
{
"name": "Junction-to-Board Thermal Resistance",
"symbol": "θJB",
"kind": "thermal",
"unit": "°C/W",
"min": null,
"typ": 4.98,
"max": null,
"conditions": "JESD 51-9, 51-12",
"source_page": 2,
"source": "datasheet"
}
]
}
},
"variants": [],
"sections": [
"hero",
"viewers",
"readme",
"breadcrumbs",
"info"
],
"discovery_triggers": [
"ltm8001iy#pbf"
],
"discovery_pitch": "LTM8001IY#PBF (Analog Devices) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
"author": {
"name": "Ray"
},
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"ltm8001iy-pbf.kicad_sym",
"ltm8001iy-pbf.kicad_mod",
"ltm8001iy-pbf.glb",
"ltm8001iy-pbf.step",
"ltm8001iy-pbf.lbr",
"docs/hero.png",
"docs/ltm8001iy-pbf-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"ltm8001iy-pbf-hero.glb",
"ltm8001iy-pbf-hero.overlay.json",
"ltm8001iy-pbf-etched.glb",
"ltm8001iy-pbf-etched.step"
],
"visibility": "public",
"description": "Analog Devices DC-DC Converters, BGA-121. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"org": "adom"
}