main
Download ZIP Propose a change
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers ltm8001iy-pbf: viewers · Ray
ltm8001iy-pbf-etched.glb Publish 0.1.0 · Ray
ltm8001iy-pbf-etched.step ltm8001iy-pbf: factory component page (tier=mfr) · Ray
ltm8001iy-pbf-hero.glb ltm8001iy-pbf: hero GLB from the etched model (keeps the MPN mark) · Ray
ltm8001iy-pbf-hero.overlay.json Publish 0.1.0 · Ray
ltm8001iy-pbf.glb Publish 0.1.0 · Ray
ltm8001iy-pbf.kicad_mod Publish 0.1.0 · Ray
ltm8001iy-pbf.kicad_sym Publish 0.1.0 · Ray
ltm8001iy-pbf.lbr Publish 0.1.0 · Ray
ltm8001iy-pbf.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 121 pins · Ray

LTM8001IY#PBF

Analog Devices · DC-DC Converters · BGA-121

LTM8001IY#PBF from Analog Devices, in a BGA-121. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
A1 GND power_in Tie to a local ground plane; most module heat flows out through these pads.
B1 GND power_in Tie to a local ground plane; most module heat flows out through these pads.
C1 GND power_in Tie to a local ground plane; most module heat flows out through these pads.
D1 GND power_in Tie to a local ground plane; most module heat flows out through these pads.
E1 GND power_in Tie to a local ground plane; most module heat flows out through these pads.
F1 GND power_in Tie to a local ground plane; most module heat flows out through these pads.
G1 GND power_in Tie to a local ground plane; most module heat flows out through these pads.
H1 GND power_in Tie to a local ground plane; most module heat flows out through these pads.
J1 VIN0 power_in Supplies the internal regulator and power switches; must be locally bypassed with a low ESR capacitor.
K1 VIN0 power_in Supplies the internal regulator and power switches; must be locally bypassed with a low ESR capacitor.
L1 VIN0 power_in Supplies the internal regulator and power switches; must be locally bypassed with a low ESR capacitor.
A2 GND power_in Tie to a local ground plane; most module heat flows out through these pads.
B2 GND power_in Tie to a local ground plane; most module heat flows out through these pads.
C2 GND power_in Tie to a local ground plane; most module heat flows out through these pads.
D2 GND power_in Tie to a local ground plane; most module heat flows out through these pads.
E2 GND power_in Tie to a local ground plane; most module heat flows out through these pads.
F2 GND power_in Tie to a local ground plane; most module heat flows out through these pads.
G2 GND power_in Tie to a local ground plane; most module heat flows out through these pads.
H2 GND power_in Tie to a local ground plane; most module heat flows out through these pads.
J2 VIN0 power_in Supplies the internal regulator and power switches; must be locally bypassed with a low ESR capacitor.
K2 VIN0 power_in Supplies the internal regulator and power switches; must be locally bypassed with a low ESR capacitor.
L2 VIN0 power_in Supplies the internal regulator and power switches; must be locally bypassed with a low ESR capacitor.
A3 VOUT0 power_out Switching converter output; apply the output filter capacitor and load between these pins and GND.
B3 VOUT0 power_out Switching converter output; apply the output filter capacitor and load between these pins and GND.
C3 VOUT0 power_out Switching converter output; apply the output filter capacitor and load between these pins and GND.
D3 GND power_in Tie to a local ground plane; most module heat flows out through these pads.
E3 GND power_in Tie to a local ground plane; most module heat flows out through these pads.
F3 GND power_in Tie to a local ground plane; most module heat flows out through these pads.
G3 GND power_in Tie to a local ground plane; most module heat flows out through these pads.
H3 GND power_in Tie to a local ground plane; most module heat flows out through these pads.
J3 VIN0 power_in Supplies the internal regulator and power switches; must be locally bypassed with a low ESR capacitor.
K3 VIN0 power_in Supplies the internal regulator and power switches; must be locally bypassed with a low ESR capacitor.
L3 VIN0 power_in Supplies the internal regulator and power switches; must be locally bypassed with a low ESR capacitor.
A4 VOUT0 power_out Switching converter output; apply the output filter capacitor and load between these pins and GND.
B4 VOUT0 power_out Switching converter output; apply the output filter capacitor and load between these pins and GND.
C4 VOUT0 power_out Switching converter output; apply the output filter capacitor and load between these pins and GND.
D4 GND power_in Tie to a local ground plane; most module heat flows out through these pads.
E4 GND power_in Tie to a local ground plane; most module heat flows out through these pads.
F4 GND power_in Tie to a local ground plane; most module heat flows out through these pads.
G4 GND power_in Tie to a local ground plane; most module heat flows out through these pads.
H4 GND power_in Tie to a local ground plane; most module heat flows out through these pads.
J4 GND power_in Tie to a local ground plane; most module heat flows out through these pads.
K4 SS passive Soft-start pin; an external capacitor to ground limits regulated current during start-up, charged with an 11μA source.
L4 RUN input Enable pin with no internal pull-up or pull-down; internally clamped, may be pulled up through a resistor if pin current does not exceed 100µA.
A5 VOUT0 power_out Switching converter output; apply the output filter capacitor and load between these pins and GND.
B5 VOUT0 power_out Switching converter output; apply the output filter capacitor and load between these pins and GND.
C5 VOUT0 power_out Switching converter output; apply the output filter capacitor and load between these pins and GND.
D5 GND power_in Tie to a local ground plane; most module heat flows out through these pads.
E5 GND power_in Tie to a local ground plane; most module heat flows out through these pads.
F5 GND power_in Tie to a local ground plane; most module heat flows out through these pads.
G5 GND power_in Tie to a local ground plane; most module heat flows out through these pads.
H5 GND power_in Tie to a local ground plane; most module heat flows out through these pads.
J5 GND power_in Tie to a local ground plane; most module heat flows out through these pads.
K5 GND power_in Tie to a local ground plane; most module heat flows out through these pads.
L5 FB0 input Regulates the FB0 pin to 1.19V; the feedback resistor RFB0 connects from this pin to ground, with RFB0 in kΩ = 11.9/(VOUT - 1.19).
A6 VIN45 power_in Input to the LDOs connected to VOUT4 and VOUT5; must be locally bypassed with a low ESR capacitor.
B6 VIN45 power_in Input to the LDOs connected to VOUT4 and VOUT5; must be locally bypassed with a low ESR capacitor.
C6 VIN45 power_in Input to the LDOs connected to VOUT4 and VOUT5; must be locally bypassed with a low ESR capacitor.
D6 GND power_in Tie to a local ground plane; most module heat flows out through these pads.
E6 GND power_in Tie to a local ground plane; most module heat flows out through these pads.
F6 GND power_in Tie to a local ground plane; most module heat flows out through these pads.
G6 GND power_in Tie to a local ground plane; most module heat flows out through these pads.
H6 GND power_in Tie to a local ground plane; most module heat flows out through these pads.
J6 GND power_in Tie to a local ground plane; most module heat flows out through these pads.
K6 GND power_in Tie to a local ground plane; most module heat flows out through these pads.
L6 COMP passive Internal compensation pin that connects to the PWM comparator input; leave open if not used.
A7 VIN45 power_in Input to the LDOs connected to VOUT4 and VOUT5; must be locally bypassed with a low ESR capacitor.
B7 VIN45 power_in Input to the LDOs connected to VOUT4 and VOUT5; must be locally bypassed with a low ESR capacitor.
C7 VIN45 power_in Input to the LDOs connected to VOUT4 and VOUT5; must be locally bypassed with a low ESR capacitor.
D7 GND power_in Tie to a local ground plane; most module heat flows out through these pads.
E7 GND power_in Tie to a local ground plane; most module heat flows out through these pads.
F7 GND power_in Tie to a local ground plane; most module heat flows out through these pads.
G7 GND power_in Tie to a local ground plane; most module heat flows out through these pads.
H7 GND power_in Tie to a local ground plane; most module heat flows out through these pads.
J7 GND power_in Tie to a local ground plane; most module heat flows out through these pads.
K7 SYNC input Frequency synchronization pin; set RT for a switching clock 20% slower than the SYNC pulse, and ground it when unused, never leaving it floating.
L7 RT passive Programs the switching frequency through a resistor to ground; must not be left open, and is set 20% lower than the SYNC frequency when SYNC is used.
A8 BIAS45 power_in Supply for the control circuitry of the LDOs on VOUT4 and VOUT5; must be 1.2V to 1.6V above the output voltage for regulation.
B8 BIAS123 power_in Supply for the control circuitry of the LDOs on VOUT1-VOUT3; must be 1.2V to 1.6V above the output voltage for regulation.
C8 GND power_in Tie to a local ground plane; most module heat flows out through these pads.
D8 GND power_in Tie to a local ground plane; most module heat flows out through these pads.
E8 GND power_in Tie to a local ground plane; most module heat flows out through these pads.
F8 GND power_in Tie to a local ground plane; most module heat flows out through these pads.
G8 GND power_in Tie to a local ground plane; most module heat flows out through these pads.
H8 GND power_in Tie to a local ground plane; most module heat flows out through these pads.
J8 GND power_in Tie to a local ground plane; most module heat flows out through these pads.
K8 VREF power_out Buffered 2V reference capable of supplying 0.5mA drive.
L8 ILIM input Reduces maximum regulated output current over a 0V to 1.5V control range; voltages above 1.5V have little effect and it should be tied to VREF if unused.
A9 SET5 passive Sets the LDO5 regulation point; a fixed 10μA flows out of this pin through a single resistor.
B9 GND power_in Tie to a local ground plane; most module heat flows out through these pads.
C9 GND power_in Tie to a local ground plane; most module heat flows out through these pads.
D9 GND power_in Tie to a local ground plane; most module heat flows out through these pads.
E9 GND power_in Tie to a local ground plane; most module heat flows out through these pads.
F9 GND power_in Tie to a local ground plane; most module heat flows out through these pads.
G9 GND power_in Tie to a local ground plane; most module heat flows out through these pads.
H9 GND power_in Tie to a local ground plane; most module heat flows out through these pads.
J9 GND power_in Tie to a local ground plane; most module heat flows out through these pads.
K9 GND power_in Tie to a local ground plane; most module heat flows out through these pads.
L9 SET1 passive Sets the LDO1 regulation point; a fixed 10μA flows out of this pin through a single resistor.
A10 VOUT5 power_out Power output of LDO5; must carry at least 1mA minimum load or the output may not regulate.
B10 GND power_in Tie to a local ground plane; most module heat flows out through these pads.
C10 GND power_in Tie to a local ground plane; most module heat flows out through these pads.
D10 GND power_in Tie to a local ground plane; most module heat flows out through these pads.
E10 GND power_in Tie to a local ground plane; most module heat flows out through these pads.
F10 GND power_in Tie to a local ground plane; most module heat flows out through these pads.
G10 GND power_in Tie to a local ground plane; most module heat flows out through these pads.
H10 GND power_in Tie to a local ground plane; most module heat flows out through these pads.
J10 GND power_in Tie to a local ground plane; most module heat flows out through these pads.
K10 GND power_in Tie to a local ground plane; most module heat flows out through these pads.
L10 VOUT1 power_out Power output of LDO1; must carry at least 1mA minimum load or the output may not regulate.
A11 VOUT5 power_out Power output of LDO5; must carry at least 1mA minimum load or the output may not regulate.
B11 VOUT4 power_out Power output of LDO4; must carry at least 1mA minimum load or the output may not regulate.
C11 VOUT4 power_out Power output of LDO4; must carry at least 1mA minimum load or the output may not regulate.
D11 SET4 passive Sets the LDO4 regulation point; a fixed 10μA flows out of this pin through a single resistor.
E11 VOUT3 power_out Power output of LDO3; must carry at least 1mA minimum load or the output may not regulate.
F11 VOUT3 power_out Power output of LDO3; must carry at least 1mA minimum load or the output may not regulate.
G11 SET3 passive Sets the LDO3 regulation point; a fixed 10μA flows out of this pin through a single resistor.
H11 SET2 passive Sets the LDO2 regulation point; a fixed 10μA flows out of this pin through a single resistor.
J11 VOUT2 power_out Power output of LDO2; must carry at least 1mA minimum load or the output may not regulate.
K11 VOUT2 power_out Power output of LDO2; must carry at least 1mA minimum load or the output may not regulate.
L11 VOUT1 power_out Power output of LDO1; must carry at least 1mA minimum load or the output may not regulate.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package BGA-121
Category Power Supply Chip
Pins 121

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Voltage at FB0 Pin 1.15 1.19 1.21 V 3
ILIM Control Range 0 1.5 V 3
ILIM Current Limit Accuracy 5.1 6.4 A ILIM = 1.5V 3
ILIM Current Limit Accuracy 2.5 3.4 A ILIM = 0.75V 3
VREF Voltage 1.9 2 2.1 V 0.5mA Load 3
SYNC Input Low Threshold 0.8 V fSYNC = 500kHz 3
SYNC Input High Threshold 1.2 V fSYNC = 500kHz 3
SYNC Input Current -0.1 0.1 µA SYNC = 0V, SYNC = 2V 3
VOUT0 Line Regulation -0.5 0.5 % 6V < VIN0 < 36V, IOUT = 1A 3
VOUT0 Load Regulation -1.2 1.2 % VIN0 = 24V, 0A < IOUT < 5A 3
SET1-5 Pin Current 9.8 10 10.2 µA BIAS123 = BIAS45 = 2V, SETx = 0V, IOUT1-5 = 1mA 3
VOUTx, SETx Offset Voltage -4 4 mV BIAS123 = BIAS45 = 2V, SETx = 0V, IOUT1-5 = 1mA 3
VOUTx, SETx Offset Voltage -6.5 6.5 mV BIAS123 = BIAS45 = 2V, SETx = 0V, IOUT1-5 = 1mA 3
Minimum VIN0 Input Voltage 6 V 3
VIN0 to VOUT0 Absolute Max Input Voltage VIN0 40 V 2
VIN45, BIAS45 Absolute Max Voltage VIN45, BIAS45 25 V 2
BIAS123 Absolute Max Voltage BIAS123 25 V 2
FB0, RT, COMP, ILIM, VREF Absolute Max Voltage 3 V 2
VOUT0-5 Absolute Max Voltage VOUT0-5 25 V 2
RUN, SYNC, SS Absolute Max Voltage 6 V 2
SET1-5 Voltage Relative to VOUT1-5 SET1-5 -0.3 0.3 V Relative to VOUT1-5, respectively 2
Current Into SET1-5 -10 10 mA 2
Current Into RUN Pin 100 µA 2
Maximum Junction Temperature TJMAX 125 °C Notes 2, 3 2
Peak Solder Reflow Body Temperature 245 °C 2
Storage Temperature -55 125 °C Note 1 2
Operating Temperature Range (I grade) -40 125 °C Internal operating temperature, LTM8001IY#PBF 2
Junction-to-Ambient Thermal Resistance θJA 16.1 °C/W JESD 51-9, 51-12 2
Junction-to-Bottom Case Thermal Resistance θJCbottom 5.99 °C/W JESD 51-9, 51-12 2
Junction-to-Top Case Thermal Resistance θJCtop 13.4 °C/W JESD 51-9, 51-12 2
Junction-to-Board Thermal Resistance θJB 4.98 °C/W JESD 51-9, 51-12 2

CAD (KiCad official)

  • Symbol: LTM8001IY#PBF
  • Footprint: Package_BGA:BGA-121_9.0x9.0mm_Layout11x11_P0.8mm_Ball0.4mm_Pad0.35mm_NSMD
  • 3D model: BGA-121 (KiCad packages3D, STEP)
  • 3D model files: ltm8001iy-pbf-etched.step / ltm8001iy-pbf-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ltm8001iy-pbf.step / ltm8001iy-pbf.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (28 pp, sha256 772b849c19b80ff3, retrieved 2026-11-02, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF