LTC6993CS6-3#TRMPBF

{
  "slug": "ltc6993cs6-3-trmpbf",
  "version": "0.1.0",
  "type": "component",
  "description": "Analog Devices Monostable Multivibrators, TSOT-23-6L. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "logic ics",
    "ltc6993cs6-3#trmpbf",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ltc6993cs6-3-trmpbf.kicad_sym",
    "ltc6993cs6-3-trmpbf.kicad_mod",
    "ltc6993cs6-3-trmpbf.glb",
    "ltc6993cs6-3-trmpbf.step",
    "ltc6993cs6-3-trmpbf.lbr",
    "docs/hero.png",
    "docs/ltc6993cs6-3-trmpbf-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ltc6993cs6-3-trmpbf-hero.glb",
    "ltc6993cs6-3-trmpbf-hero.overlay.json",
    "ltc6993cs6-3-trmpbf-etched.glb"
  ],
  "component": {
    "mpn": "LTC6993CS6-3#TRMPBF",
    "manufacturer": "Analog Devices",
    "package": "TSOT-23-6L",
    "pin_count": 6,
    "category": "Logic ICs",
    "subcategory": "Monostable Multivibrators",
    "datasheet": "https://www.analog.com/media/en/technical-documentation/data-sheets/LTC6993-6993-1-6993-2-6993-3-6993-4.pdf",
    "parts": {
      "symbol": "ltc6993cs6-3-trmpbf.kicad_sym",
      "footprint": "ltc6993cs6-3-trmpbf.kicad_mod",
      "model_3d": "ltc6993cs6-3-trmpbf-hero.glb",
      "model_3d_plain": "ltc6993cs6-3-trmpbf-etched.glb",
      "model_3d_step": "ltc6993cs6-3-trmpbf-etched.step",
      "model_3d_step_plain": "ltc6993cs6-3-trmpbf.step",
      "lbr": "ltc6993cs6-3-trmpbf.lbr"
    },
    "distributor_links": {
      "lcsc": "C581041",
      "digikey": "505-LTC6993CS6-3#TRMPBFTR-ND",
      "mouser": "584-C6993CS6-3TRMPBF"
    },
    "distributor_check": {
      "checked_at": "2026-10-29T03:46:54Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "505-LTC6993CS6-3#TRMPBFTR-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "584-C6993CS6-3TRMPBF",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "TRIG",
        "type": "input",
        "description": "Trigger input: for the LTC6993-3 a falling edge initiates the output pulse, and additional triggers are ignored until the output pulse has terminated."
      },
      {
        "number": "2",
        "name": "GND",
        "type": "power_in",
        "description": "Ground; tie to a low inductance ground plane for best performance."
      },
      {
        "number": "3",
        "name": "SET",
        "type": "input",
        "description": "Pulse width setting input regulated to 1V above GND, with ISET programmable from 1.25µA to 20µA; the output pulse continues indefinitely if ISET drops below approximately 500nA, and capacitance on this pin should be limited to less than 10pF."
      },
      {
        "number": "4",
        "name": "DIV",
        "type": "input",
        "description": "Programmable divider and polarity input whose voltage (0 to V+) is converted to a 4-bit DIVCODE using 1% resistors, with capacitance limited to less than 100pF, and whose MSB (POL) sets the output to a positive pulse when 0 or a negative pulse when 1."
      },
      {
        "number": "5",
        "name": "V+",
        "type": "power_in",
        "description": "Supply voltage input from 2.25V to 5.5V that should be kept free from noise and ripple and bypassed directly to GND with a 0.1µF capacitor."
      },
      {
        "number": "6",
        "name": "OUT",
        "type": "output",
        "description": "Output that swings from GND to V+ with an output resistance of approximately 30Ω, and a series resistor should be used when driving an LED or low impedance load to limit source/sink current to 20mA."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pin numbers were taken from the S6 TSOT-23 pin configuration (TRIG 1, GND 2, SET 3, DIV 4, V+ 5, OUT; The datasheet lists the S6 package in the ordering table for LTC6993CS6-3#TRMPBF (part marking LTFMH"
        ],
        "pages_sent": 13,
        "cost_usd": 0.0653,
        "at": "2026-10-29T03:46:47"
      },
      "datasheet": {
        "url": "https://www.analog.com/media/en/technical-documentation/data-sheets/LTC6993-6993-1-6993-2-6993-3-6993-4.pdf",
        "pages": 28,
        "sha256": "ae8a9c5794ce0a01",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 6,
        "described": 6,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ltc6993cs6-3-trmpbf.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          0.95
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "1007b8f67a3e81e2c5182bfd1fd27afe4d8d3710e0bfa1a14b8a91db8b595eb5",
        "checked": "2026-10-29",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ltc6993cs6-3-trmpbf-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          0.95
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "58175e7830cadc115ba29f8e159ff1929b20b8fe589892106b642cdb98c673e5",
        "checked": "2026-10-29",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "S6",
      "source_page": 26,
      "D": {
        "nom_mm": 2.9,
        "range_mm": [
          null,
          null
        ]
      },
      "E1": {
        "nom_mm": 1.5,
        "range_mm": [
          null,
          null
        ]
      },
      "E": {
        "nom_mm": 2.8,
        "range_mm": [
          null,
          null
        ]
      },
      "e": {
        "nom_mm": 0.95,
        "range_mm": [
          null,
          null
        ]
      },
      "A": {
        "nom_mm": 1.0,
        "range_mm": [
          null,
          1.0
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "ltc6993cs6-3-trmpbf.step",
        "verdict": "PASS",
        "reasons": [
          "height and body within the datasheet's package drawing"
        ],
        "by": "factory/package_fit.py"
      }
    }
  }
}