main
Ray Publish 0.1.0 2515690

LTC6990HS6#TRMPBF

Analog Devices · Timers / Clock Oscillators · TSOT-23-6

LTC6990HS6#TRMPBF from Analog Devices, in a TSOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OE input Output enable: driving OE low disables the output asynchronously, forcing it low (Hi-Z = 0) or floating it (Hi-Z = 1), and when re-enabled the output may stay low briefly to synchronize with the internal oscillator.
2 GND power_in Ground; tie to a low-inductance ground plane for best performance.
3 SET input Frequency-setting input regulated to 1V above GND, with ISET programmable from 1.25µA to 40µA; oscillation stops if ISET falls below approximately 500nA, and the SET pin capacitance should be kept below 10pF.
4 DIV input Programmable divider and Hi-Z mode input whose voltage is digitized by a V+-referenced A/D converter into a 4-bit DIVCODE; its MSB sets the output behavior when disabled, and the capacitance on this pin should be limited to less than 100pF.
5 V+ power_in Supply voltage of 2.25V to 5.5V that must be kept free from noise and ripple and bypassed directly to GND with a 0.1µF capacitor.
6 OUT output Oscillator output swinging from GND to V+ with an output resistance of approximately 30Ω; a series resistor should be used when driving an LED or other low-impedance load to limit source/sink current to 20mA.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package TSOT-23-6
Category Clock and Timing
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage (V+) to GND V+ 6 V 2
Operating Temperature Range (LTC6990H grade) -40 125 °C LTC6990H, specified temperature range 2
Storage Temperature Range -65 150 °C 2
Junction Temperature TJMAX 150 °C 2
Thermal Resistance Junction-to-Ambient (S6 TSOT-23) θJA 192 °C/W S6 TSOT-23 package 2
Thermal Resistance Junction-to-Case (S6 TSOT-23) θJC 51 °C/W S6 TSOT-23 package 2
Output Frequency (recommended range) fOUT 0.488 1000 kHz Recommended Range: RSET = 50k to 800k 3
Output Frequency (extended range) fOUT 0.488 2000 kHz Extended Range: RSET = 25k to 800k 3
Frequency Accuracy (recommended range) ∆fOUT -1.5 1.5 % Recommended Range: RSET = 50k to 800k; l (full temperature range) 3
Frequency Accuracy (extended range) ∆fOUT -3.2 3.2 % Extended Range: RSET = 25k to 800k; l (full temperature range) 3
Frequency Drift Over Temperature ∆fOUT/∆T -0.005 0.005 %/°C Over temperature (l) 3
Frequency Drift Over Supply ∆fOUT/∆V+ 0.23 0.55 %/V V+ = 4.5V to 5.5V (l) 3
Frequency Drift Over Supply ∆fOUT/∆V+ 0.06 0.16 %/V V+ = 2.25V to 4.5V (l) 3
Duty Cycle 47 50 53 % NDIV = 1, RSET = 25k to 800k (l) 3
Duty Cycle 48 50 52 % NDIV > 1, RSET = 25k to 800k (l) 3
Voltage at SET Pin VSET 0.97 1 1.03 V (l) 3
VSET Drift Over Temperature ∆VSET/∆T -75 75 µV/°C (l) 3
Frequency-Setting Resistor (recommended range) RSET 50 800 kΩ Recommended range (l) 3
Frequency-Setting Resistor (extended range) RSET 25 800 kΩ Extended range (l) 3
DIV Pin Voltage VDIV 0 V (l); printed maximum is V+ (not a number) 3
DIV Pin Valid Code Range Deviation ∆VDIV/V+ -1.5 1.5 % Deviation from ideal VDIV/V+ = (DIVCODE + 0.5)/16 (l) 3
DIV Pin Input Current -10 10 nA (l) 3
V+ Operating Supply Voltage Range V+ 2.25 5.5 V (l) 3
Supply Current IS 235 283 µA RL = ∞, NDIV = 1, RSET = 50k, V+ = 5.5V (l) 3
Supply Current IS 145 183 µA RL = ∞, NDIV = 1, RSET = 50k, V+ = 2.25V (l) 3
Supply Current IS 71 105 µA RL = ∞, NDIV = 1, RSET = 800k, V+ = 5.5V (l) 3
Supply Current IS 59 92 µA RL = ∞, NDIV = 1, RSET = 800k, V+ = 2.25V (l) 3
Supply Current IS 137 180 µA RL = ∞, NDIV = 128, RSET = 50k, V+ = 5.5V (l) 3
Supply Current IS 106 145 µA RL = ∞, NDIV = 128, RSET = 50k, V+ = 2.25V (l) 3
Supply Current IS 66 100 µA RL = ∞, NDIV = 128, RSET = 800k, V+ = 5.5V (l) 3
Supply Current IS 56 90 µA RL = ∞, NDIV = 128, RSET = 800k, V+ = 2.25V (l) 3
OE Pin Input Current -10 10 nA OE = 0V to V+ (l) 4
OUT Pin Hi-Z Leakage -10 10 µA OE = 0V, DIVCODE ≥ 8, OUT = 0V to V+ 4
Maximum Output Current IOUT(MAX) -20 20 mA 4
High Level Output Voltage VOH 5.45 5.48 V V+ = 5.5V, IOH = -1mA (l) 4
High Level Output Voltage VOH 4.84 5.15 V V+ = 5.5V, IOH = -16mA (l) 4
High Level Output Voltage VOH 3.24 3.27 V V+ = 3.3V, IOH = -1mA (l) 4
High Level Output Voltage VOH 2.75 2.99 V V+ = 3.3V, IOH = -10mA (l) 4
High Level Output Voltage VOH 2.17 2.21 V V+ = 2.25V, IOH = -1mA (l) 4
High Level Output Voltage VOH 1.58 1.88 V V+ = 2.25V, IOH = -8mA (l) 4
Low Level Output Voltage VOL 0.02 0.04 V V+ = 5.5V, IOL = 1mA (l) 4
Low Level Output Voltage VOL 0.26 0.54 V V+ = 5.5V, IOL = 16mA (l) 4
Low Level Output Voltage VOL 0.03 0.05 V V+ = 3.3V, IOL = 1mA (l) 4
Low Level Output Voltage VOL 0.22 0.46 V V+ = 3.3V, IOL = 10mA (l) 4
Low Level Output Voltage VOL 0.03 0.07 V V+ = 2.25V, IOL = 1mA (l) 4
Period Jitter 0.38 %P-P NDIV = 1 3
Period Jitter 0.22 %P-P NDIV = 2 3
Period Jitter 0.027 %RMS NDIV = 2 3
Period Jitter 0.022 %P-P NDIV = 128 3
Period Jitter 0.004 %RMS NDIV = 128 3
Power-On Reset Voltage 1.95 V RSET = 25k to 800k (l) 3

CAD (KiCad official)

  • Symbol: LTC6990HS6#TRMPBF
  • Footprint: Package_TO_SOT_SMD:TSOT-23-6
  • 3D model: TSOT-23-6 (KiCad packages3D, STEP)
  • 3D model files: ltc6990hs6-trmpbf-etched.step / ltc6990hs6-trmpbf-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ltc6990hs6-trmpbf.step / ltc6990hs6-trmpbf.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (30 pp, sha256 57c3612930febe0d, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF