main
Ray
Publish 0.1.0
4e22cff
LTC6909IMS#PBF
Analog Devices · Timers · MSOP-16
LTC6909IMS#PBF from Analog Devices, in a MSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | V+A | power_in | Analog supply (2.7V to 5.5V), kept free of noise and ripple, bypassed to GND with 0.1µF or greater low ESR capacitor and tied to the same supply as V+D. |
| 2 | GND | power_in | Ground connection, should be tied to a ground plane for best performance. |
| 3 | PH0 | input | Output phasing selection bit 0, a CMOS logic input with no internal pull-up or pull-down that must be tied to GND (0) or V+D (1). |
| 4 | PH1 | input | Output phasing selection bit 1, a CMOS logic input with no internal pull-up or pull-down that must be tied to GND (0) or V+D (1). |
| 5 | OUT1 | output | CMOS rail-to-rail oscillator output with approximately 40Ω series resistance, capable of driving 1k and/or 50pF loads, and Hi-Z during start-up or when unused; tying it to MOD disables modulation. |
| 6 | OUT2 | output | CMOS rail-to-rail oscillator output with approximately 40Ω series resistance, capable of driving 1k and/or 50pF loads, and Hi-Z during start-up or when unused. |
| 7 | OUT3 | output | CMOS rail-to-rail oscillator output with approximately 40Ω series resistance, capable of driving 1k and/or 50pF loads, and Hi-Z during start-up or when unused. |
| 8 | OUT4 | output | CMOS rail-to-rail oscillator output with approximately 40Ω series resistance, capable of driving 1k and/or 50pF loads, and Hi-Z during start-up or when unused. |
| 9 | OUT5 | output | CMOS rail-to-rail oscillator output with approximately 40Ω series resistance, capable of driving 1k and/or 50pF loads, and Hi-Z during start-up or when unused. |
| 10 | OUT6 | output | CMOS rail-to-rail oscillator output with approximately 40Ω series resistance, capable of driving 1k and/or 50pF loads, and Hi-Z during start-up or when unused. |
| 11 | OUT7 | output | CMOS rail-to-rail oscillator output with approximately 40Ω series resistance, capable of driving 1k and/or 50pF loads, and Hi-Z during start-up or when unused. |
| 12 | OUT8 | output | CMOS rail-to-rail oscillator output with approximately 40Ω series resistance, capable of driving 1k and/or 50pF loads, and Hi-Z during start-up or when unused. |
| 13 | V+D | power_in | Digital supply (2.7V to 5.5V), bypassed to GND with 0.1µF or greater low ESR capacitor and tied to the same supply as V+A. |
| 14 | MOD | input | Spread spectrum modulation rate input: GND gives fOUT/16, floating (with 1nF or larger capacitor to GND) gives fOUT/32, V+D gives fOUT/64, and tying an active output to it turns modulation off. |
| 15 | PH2 | input | Output phasing selection bit 2, a CMOS logic input with no internal pull-up or pull-down that must be tied to GND (0) or V+D (1). |
| 16 | SET | passive | Frequency setting resistor input; the resistor to V+A sets the master oscillator frequency, the pin is held about 1.1V below V+A, with a recommended 20k to 400k precision metal film resistor and under 10pF capacitance on the pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | MSOP-16 |
| Category | Clock And Timing |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Frequency Accuracy, V+=5V, PH=3, 500kHz≤fMASTER≤10MHz (25°C) | ΔfMASTER | -2.5 | 1 | 2.5 | % | V+ = 5V, PH = 3, 500kHz ≤ fMASTER ≤ 10MHz | 2 |
| Frequency Accuracy, V+=5V, 500kHz≤fMASTER≤10MHz (over temp) | ΔfMASTER | -3 | 2.5 | 3 | % | V+ = 5V, 500kHz ≤ fMASTER ≤ 10MHz, full temperature range | 2 |
| Frequency Accuracy, V+=5V, 100kHz≤fMASTER<500kHz | ΔfMASTER | -4.5 | 3 | 4.5 | % | V+ = 5V, 100kHz ≤ fMASTER < 500kHz | 2 |
| Frequency Accuracy, V+=5V, 10MHz≤fMASTER≤20MHz | ΔfMASTER | -3.5 | 2.7 | 3.5 | % | V+ = 5V, 10MHz ≤ fMASTER ≤ 20MHz | 2 |
| Frequency Accuracy, V+=2.7V, PH=3, 500kHz≤fMASTER≤10MHz (25°C) | ΔfMASTER | -2.5 | 0.5 | 2.5 | % | V+ = 2.7V, PH = 3, 500kHz ≤ fMASTER ≤ 10MHz | 2 |
| Frequency Accuracy, V+=2.7V, 500kHz≤fMASTER≤10MHz (over temp) | ΔfMASTER | -3 | 2 | 3 | % | V+ = 2.7V, 500kHz ≤ fMASTER ≤ 10MHz, full temperature range | 2 |
| Frequency Accuracy, V+=2.7V, 100kHz≤fMASTER<500kHz | ΔfMASTER | -4.5 | 2.5 | 4.5 | % | V+ = 2.7V, 100kHz ≤ fMASTER < 500kHz | 2 |
| Frequency Drift Over Temperature | ΔfOUT/ΔT | 0.004 | %/°C | RSET = 100k | 2 | ||
| Frequency Drift Over Supply, 4.5V to 5.5V | ΔfOUT/ΔV+ | 0.4 | 0.9 | %/V | V+ = 4.5V to 5.5V, RSET = 100k | 2 | |
| Frequency Drift Over Supply, 2.7V to 3.6V | ΔfOUT/ΔV+ | 0.04 | 0.35 | %/V | V+ = 2.7V to 3.6V, RSET = 100k | 2 | |
| RSET Range, 4.5V≤V+≤5.5V | RSET | 10 | 2000 | kΩ | 4.5V ≤ V+ ≤ 5.5V | 3 | |
| RSET Range, 2.7V≤V+≤4.5V | RSET | 20 | 2000 | kΩ | 2.7V ≤ V+ ≤ 4.5V | 3 | |
| Frequency Spread with SSFM Enabled | 7 | 10 | 13 | % | RSET = 100k, MOD Pin = V+, GND or Open | 3 | |
| Duty Cycle | 45 | 50 | 55 | % | SSFM Disabled | 3 | |
| Operating Supply Voltage Range | V+A, V+D | 2.7 | 5.5 | V | 3 | ||
| Supply Current, SSFM fOUT/64, V+=5V | IS | 0.6 | 0.85 | mA | RSET = 2M, RL = ∞, PH = 8, MOD = V+, V+ = 5V | 3 | |
| Supply Current, SSFM fOUT/64, V+=2.7V | IS | 0.55 | 0.8 | mA | RSET = 2M, RL = ∞, PH = 8, MOD = V+, V+ = 2.7V | 3 | |
| Supply Current, SSFM fOUT/16, V+=5V | IS | 2.4 | 2.7 | mA | RSET = 20k, RL = ∞, PH = 3, MOD = GND, V+ = 5V | 3 | |
| Supply Current, SSFM fOUT/16, V+=2.7V | IS | 1.55 | 1.8 | mA | RSET = 20k, RL = ∞, PH = 3, MOD = GND, V+ = 2.7V | 3 | |
| Supply Current, SSFM off, V+=5V | IS | 0.4 | 0.65 | mA | RSET = 2M, RL = ∞, PH = 8, MOD = OUT1, V+ = 5V | 3 | |
| Supply Current, SSFM off, V+=2.7V | IS | 0.37 | 0.6 | mA | RSET = 2M, RL = ∞, PH = 8, MOD = OUT1, V+ = 2.7V | 3 | |
| Low Level MOD Input Voltage | VIL_MOD | 0.4 | V | 3 | |||
| MOD Input Current, MOD=V+ | IMOD | 2 | 4 | µA | MOD Pin = V+, V+ = 5V | 3 | |
| MOD Input Current, MOD=GND | IMOD | -4 | -2 | µA | MOD Pin = GND, V+ = 5V | 3 | |
| Low Level PHx Input Voltage | VIL_PH | 0.4 | V | PHx Refers to PH0, PH1 and PH2 | 3 | ||
| Digital Input Current, PH0, PH1, PH2 | IIN_PHX | -1 | 1 | µA | 0V < VIN < V+ | 3 | |
| High Level Output Voltage, V+=5V, 5mA load | VOH | 4.35 | 4.65 | V | V+ = 5V, 5mA Load to GND | 3 | |
| High Level Output Voltage, V+=5V, no load | VOH | 4.92 | V | V+ = 5V, No Load | 3 | ||
| High Level Output Voltage, V+=2.7V, 3mA load | VOH | 2.1 | 2.4 | V | V+ = 2.7V, 3mA Load to GND | 3 | |
| High Level Output Voltage, V+=2.7V, no load | VOH | 2.63 | V | V+ = 2.7V, No Load | 3 | ||
| Low Level Output Voltage, V+=5V, 5mA load | VOL | 0.25 | 0.55 | V | V+ = 5V, 5mA Load to V+ | 3 | |
| Low Level Output Voltage, V+=5V, no load | VOL | 0.07 | V | V+ = 5V, No Load | 3 | ||
| Low Level Output Voltage, V+=2.7V, 3mA load | VOL | 0.25 | 0.55 | V | V+ = 2.7V, 3mA Load to V+ | 3 | |
| Low Level Output Voltage, V+=2.7V, no load | VOL | 0.07 | V | V+ = 2.7V, No Load | 3 | ||
| Long-Term Stability of Output Frequency | 300 | ppm/√kHr | 3 | ||||
| Output Rise Time, V+=5V | tr | 1.6 | ns | V+ = 5V | 3 | ||
| Output Rise Time, V+=2.7V | tr | 2.5 | ns | V+ = 2.7V | 3 | ||
| Output Fall Time, V+=5V | tf | 1.6 | ns | V+ = 5V | 3 | ||
| Output Fall Time, V+=2.7V | tf | 2 | ns | V+ = 2.7V | 3 | ||
| Supply Voltage (V+A) to GND | V+A | 6 | V | 2 | |||
| Supply Voltage (V+D) to GND | V+D | 6 | V | 2 | |||
| Junction Temperature | TJ | 150 | °C | 2 | |||
| Storage Temperature Range | TSTG | -65 | 150 | °C | 2 | ||
| Lead Temperature (Soldering, 10 sec) | 300 | °C | Soldering, 10 sec | 2 | |||
| Operating Temperature Range (LTC6909I) | -40 | 85 | °C | LTC6909I | 2 | ||
| Specified Temperature Range (LTC6909I) | -40 | 85 | °C | LTC6909I | 2 | ||
| Junction-to-Ambient Thermal Resistance | θJA | 125 | °C/W | MS16 package | 2 |
CAD (KiCad official)
- Symbol:
LTC6909IMS#PBF - Footprint:
Package_SO:MSOP-16_3x4.039mm_P0.5mm - 3D model: MSOP-16 (KiCad packages3D, STEP)
- 3D model files:
ltc6909ims-pbf-etched.step/ltc6909ims-pbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ltc6909ims-pbf.step/ltc6909ims-pbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (22 pp, sha256
159f5d595fe8ca78, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LTC6909IMS#PBF
**Analog Devices** · Timers · MSOP-16
LTC6909IMS#PBF from Analog Devices, in a MSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | V+A | power_in | Analog supply (2.7V to 5.5V), kept free of noise and ripple, bypassed to GND with 0.1µF or greater low ESR capacitor and tied to the same supply as V+D. |
| 2 | GND | power_in | Ground connection, should be tied to a ground plane for best performance. |
| 3 | PH0 | input | Output phasing selection bit 0, a CMOS logic input with no internal pull-up or pull-down that must be tied to GND (0) or V+D (1). |
| 4 | PH1 | input | Output phasing selection bit 1, a CMOS logic input with no internal pull-up or pull-down that must be tied to GND (0) or V+D (1). |
| 5 | OUT1 | output | CMOS rail-to-rail oscillator output with approximately 40Ω series resistance, capable of driving 1k and/or 50pF loads, and Hi-Z during start-up or when unused; tying it to MOD disables modulation. |
| 6 | OUT2 | output | CMOS rail-to-rail oscillator output with approximately 40Ω series resistance, capable of driving 1k and/or 50pF loads, and Hi-Z during start-up or when unused. |
| 7 | OUT3 | output | CMOS rail-to-rail oscillator output with approximately 40Ω series resistance, capable of driving 1k and/or 50pF loads, and Hi-Z during start-up or when unused. |
| 8 | OUT4 | output | CMOS rail-to-rail oscillator output with approximately 40Ω series resistance, capable of driving 1k and/or 50pF loads, and Hi-Z during start-up or when unused. |
| 9 | OUT5 | output | CMOS rail-to-rail oscillator output with approximately 40Ω series resistance, capable of driving 1k and/or 50pF loads, and Hi-Z during start-up or when unused. |
| 10 | OUT6 | output | CMOS rail-to-rail oscillator output with approximately 40Ω series resistance, capable of driving 1k and/or 50pF loads, and Hi-Z during start-up or when unused. |
| 11 | OUT7 | output | CMOS rail-to-rail oscillator output with approximately 40Ω series resistance, capable of driving 1k and/or 50pF loads, and Hi-Z during start-up or when unused. |
| 12 | OUT8 | output | CMOS rail-to-rail oscillator output with approximately 40Ω series resistance, capable of driving 1k and/or 50pF loads, and Hi-Z during start-up or when unused. |
| 13 | V+D | power_in | Digital supply (2.7V to 5.5V), bypassed to GND with 0.1µF or greater low ESR capacitor and tied to the same supply as V+A. |
| 14 | MOD | input | Spread spectrum modulation rate input: GND gives fOUT/16, floating (with 1nF or larger capacitor to GND) gives fOUT/32, V+D gives fOUT/64, and tying an active output to it turns modulation off. |
| 15 | PH2 | input | Output phasing selection bit 2, a CMOS logic input with no internal pull-up or pull-down that must be tied to GND (0) or V+D (1). |
| 16 | SET | passive | Frequency setting resistor input; the resistor to V+A sets the master oscillator frequency, the pin is held about 1.1V below V+A, with a recommended 20k to 400k precision metal film resistor and under 10pF capacitance on the pin. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | MSOP-16 |
| Category | Clock And Timing |
| Pins | 16 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Frequency Accuracy, V+=5V, PH=3, 500kHz≤fMASTER≤10MHz (25°C) | ΔfMASTER | -2.5 | 1 | 2.5 | % | V+ = 5V, PH = 3, 500kHz ≤ fMASTER ≤ 10MHz | 2 |
| Frequency Accuracy, V+=5V, 500kHz≤fMASTER≤10MHz (over temp) | ΔfMASTER | -3 | 2.5 | 3 | % | V+ = 5V, 500kHz ≤ fMASTER ≤ 10MHz, full temperature range | 2 |
| Frequency Accuracy, V+=5V, 100kHz≤fMASTER<500kHz | ΔfMASTER | -4.5 | 3 | 4.5 | % | V+ = 5V, 100kHz ≤ fMASTER < 500kHz | 2 |
| Frequency Accuracy, V+=5V, 10MHz≤fMASTER≤20MHz | ΔfMASTER | -3.5 | 2.7 | 3.5 | % | V+ = 5V, 10MHz ≤ fMASTER ≤ 20MHz | 2 |
| Frequency Accuracy, V+=2.7V, PH=3, 500kHz≤fMASTER≤10MHz (25°C) | ΔfMASTER | -2.5 | 0.5 | 2.5 | % | V+ = 2.7V, PH = 3, 500kHz ≤ fMASTER ≤ 10MHz | 2 |
| Frequency Accuracy, V+=2.7V, 500kHz≤fMASTER≤10MHz (over temp) | ΔfMASTER | -3 | 2 | 3 | % | V+ = 2.7V, 500kHz ≤ fMASTER ≤ 10MHz, full temperature range | 2 |
| Frequency Accuracy, V+=2.7V, 100kHz≤fMASTER<500kHz | ΔfMASTER | -4.5 | 2.5 | 4.5 | % | V+ = 2.7V, 100kHz ≤ fMASTER < 500kHz | 2 |
| Frequency Drift Over Temperature | ΔfOUT/ΔT | | 0.004 | | %/°C | RSET = 100k | 2 |
| Frequency Drift Over Supply, 4.5V to 5.5V | ΔfOUT/ΔV+ | | 0.4 | 0.9 | %/V | V+ = 4.5V to 5.5V, RSET = 100k | 2 |
| Frequency Drift Over Supply, 2.7V to 3.6V | ΔfOUT/ΔV+ | | 0.04 | 0.35 | %/V | V+ = 2.7V to 3.6V, RSET = 100k | 2 |
| RSET Range, 4.5V≤V+≤5.5V | RSET | 10 | | 2000 | kΩ | 4.5V ≤ V+ ≤ 5.5V | 3 |
| RSET Range, 2.7V≤V+≤4.5V | RSET | 20 | | 2000 | kΩ | 2.7V ≤ V+ ≤ 4.5V | 3 |
| Frequency Spread with SSFM Enabled | | 7 | 10 | 13 | % | RSET = 100k, MOD Pin = V+, GND or Open | 3 |
| Duty Cycle | | 45 | 50 | 55 | % | SSFM Disabled | 3 |
| Operating Supply Voltage Range | V+A, V+D | 2.7 | | 5.5 | V | | 3 |
| Supply Current, SSFM fOUT/64, V+=5V | IS | | 0.6 | 0.85 | mA | RSET = 2M, RL = ∞, PH = 8, MOD = V+, V+ = 5V | 3 |
| Supply Current, SSFM fOUT/64, V+=2.7V | IS | | 0.55 | 0.8 | mA | RSET = 2M, RL = ∞, PH = 8, MOD = V+, V+ = 2.7V | 3 |
| Supply Current, SSFM fOUT/16, V+=5V | IS | | 2.4 | 2.7 | mA | RSET = 20k, RL = ∞, PH = 3, MOD = GND, V+ = 5V | 3 |
| Supply Current, SSFM fOUT/16, V+=2.7V | IS | | 1.55 | 1.8 | mA | RSET = 20k, RL = ∞, PH = 3, MOD = GND, V+ = 2.7V | 3 |
| Supply Current, SSFM off, V+=5V | IS | | 0.4 | 0.65 | mA | RSET = 2M, RL = ∞, PH = 8, MOD = OUT1, V+ = 5V | 3 |
| Supply Current, SSFM off, V+=2.7V | IS | | 0.37 | 0.6 | mA | RSET = 2M, RL = ∞, PH = 8, MOD = OUT1, V+ = 2.7V | 3 |
| Low Level MOD Input Voltage | VIL_MOD | | | 0.4 | V | | 3 |
| MOD Input Current, MOD=V+ | IMOD | | 2 | 4 | µA | MOD Pin = V+, V+ = 5V | 3 |
| MOD Input Current, MOD=GND | IMOD | -4 | -2 | | µA | MOD Pin = GND, V+ = 5V | 3 |
| Low Level PHx Input Voltage | VIL_PH | | | 0.4 | V | PHx Refers to PH0, PH1 and PH2 | 3 |
| Digital Input Current, PH0, PH1, PH2 | IIN_PHX | -1 | | 1 | µA | 0V < VIN < V+ | 3 |
| High Level Output Voltage, V+=5V, 5mA load | VOH | 4.35 | 4.65 | | V | V+ = 5V, 5mA Load to GND | 3 |
| High Level Output Voltage, V+=5V, no load | VOH | | 4.92 | | V | V+ = 5V, No Load | 3 |
| High Level Output Voltage, V+=2.7V, 3mA load | VOH | 2.1 | 2.4 | | V | V+ = 2.7V, 3mA Load to GND | 3 |
| High Level Output Voltage, V+=2.7V, no load | VOH | | 2.63 | | V | V+ = 2.7V, No Load | 3 |
| Low Level Output Voltage, V+=5V, 5mA load | VOL | | 0.25 | 0.55 | V | V+ = 5V, 5mA Load to V+ | 3 |
| Low Level Output Voltage, V+=5V, no load | VOL | | 0.07 | | V | V+ = 5V, No Load | 3 |
| Low Level Output Voltage, V+=2.7V, 3mA load | VOL | | 0.25 | 0.55 | V | V+ = 2.7V, 3mA Load to V+ | 3 |
| Low Level Output Voltage, V+=2.7V, no load | VOL | | 0.07 | | V | V+ = 2.7V, No Load | 3 |
| Long-Term Stability of Output Frequency | | | 300 | | ppm/√kHr | | 3 |
| Output Rise Time, V+=5V | tr | | 1.6 | | ns | V+ = 5V | 3 |
| Output Rise Time, V+=2.7V | tr | | 2.5 | | ns | V+ = 2.7V | 3 |
| Output Fall Time, V+=5V | tf | | 1.6 | | ns | V+ = 5V | 3 |
| Output Fall Time, V+=2.7V | tf | | 2 | | ns | V+ = 2.7V | 3 |
| Supply Voltage (V+A) to GND | V+A | | | 6 | V | | 2 |
| Supply Voltage (V+D) to GND | V+D | | | 6 | V | | 2 |
| Junction Temperature | TJ | | | 150 | °C | | 2 |
| Storage Temperature Range | TSTG | -65 | | 150 | °C | | 2 |
| Lead Temperature (Soldering, 10 sec) | | | | 300 | °C | Soldering, 10 sec | 2 |
| Operating Temperature Range (LTC6909I) | | -40 | | 85 | °C | LTC6909I | 2 |
| Specified Temperature Range (LTC6909I) | | -40 | | 85 | °C | LTC6909I | 2 |
| Junction-to-Ambient Thermal Resistance | θJA | | 125 | | °C/W | MS16 package | 2 |
## CAD (KiCad official)
- Symbol: `LTC6909IMS#PBF`
- Footprint: `Package_SO:MSOP-16_3x4.039mm_P0.5mm`
- 3D model: MSOP-16 (KiCad packages3D, STEP)
- 3D model files: `ltc6909ims-pbf-etched.step` / `ltc6909ims-pbf-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ltc6909ims-pbf.step` / `ltc6909ims-pbf.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Analog Devices datasheet](https://www.analog.com/media/en/technical-documentation/data-sheets/6909fa.pdf) (22 pp, sha256 `159f5d595fe8ca78`, retrieved 2026-10-30, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ltc6909ims-pbf-datasheet.pdf)