main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers ltc6909ims-pbf: viewers · Ray
ltc6909ims-pbf-etched.glb Publish 0.1.0 · Ray
ltc6909ims-pbf-etched.step ltc6909ims-pbf: factory component page (tier=mfr) · Ray
ltc6909ims-pbf-hero.glb ltc6909ims-pbf: hero GLB from the etched model (keeps the MPN mark) · Ray
ltc6909ims-pbf-hero.overlay.json Publish 0.1.0 · Ray
ltc6909ims-pbf.glb Publish 0.1.0 · Ray
ltc6909ims-pbf.kicad_mod Publish 0.1.0 · Ray
ltc6909ims-pbf.kicad_sym Publish 0.1.0 · Ray
ltc6909ims-pbf.lbr Publish 0.1.0 · Ray
ltc6909ims-pbf.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 16 pins · Ray

LTC6909IMS#PBF

Analog Devices · Timers · MSOP-16

LTC6909IMS#PBF from Analog Devices, in a MSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 V+A power_in Analog supply (2.7V to 5.5V), kept free of noise and ripple, bypassed to GND with 0.1µF or greater low ESR capacitor and tied to the same supply as V+D.
2 GND power_in Ground connection, should be tied to a ground plane for best performance.
3 PH0 input Output phasing selection bit 0, a CMOS logic input with no internal pull-up or pull-down that must be tied to GND (0) or V+D (1).
4 PH1 input Output phasing selection bit 1, a CMOS logic input with no internal pull-up or pull-down that must be tied to GND (0) or V+D (1).
5 OUT1 output CMOS rail-to-rail oscillator output with approximately 40Ω series resistance, capable of driving 1k and/or 50pF loads, and Hi-Z during start-up or when unused; tying it to MOD disables modulation.
6 OUT2 output CMOS rail-to-rail oscillator output with approximately 40Ω series resistance, capable of driving 1k and/or 50pF loads, and Hi-Z during start-up or when unused.
7 OUT3 output CMOS rail-to-rail oscillator output with approximately 40Ω series resistance, capable of driving 1k and/or 50pF loads, and Hi-Z during start-up or when unused.
8 OUT4 output CMOS rail-to-rail oscillator output with approximately 40Ω series resistance, capable of driving 1k and/or 50pF loads, and Hi-Z during start-up or when unused.
9 OUT5 output CMOS rail-to-rail oscillator output with approximately 40Ω series resistance, capable of driving 1k and/or 50pF loads, and Hi-Z during start-up or when unused.
10 OUT6 output CMOS rail-to-rail oscillator output with approximately 40Ω series resistance, capable of driving 1k and/or 50pF loads, and Hi-Z during start-up or when unused.
11 OUT7 output CMOS rail-to-rail oscillator output with approximately 40Ω series resistance, capable of driving 1k and/or 50pF loads, and Hi-Z during start-up or when unused.
12 OUT8 output CMOS rail-to-rail oscillator output with approximately 40Ω series resistance, capable of driving 1k and/or 50pF loads, and Hi-Z during start-up or when unused.
13 V+D power_in Digital supply (2.7V to 5.5V), bypassed to GND with 0.1µF or greater low ESR capacitor and tied to the same supply as V+A.
14 MOD input Spread spectrum modulation rate input: GND gives fOUT/16, floating (with 1nF or larger capacitor to GND) gives fOUT/32, V+D gives fOUT/64, and tying an active output to it turns modulation off.
15 PH2 input Output phasing selection bit 2, a CMOS logic input with no internal pull-up or pull-down that must be tied to GND (0) or V+D (1).
16 SET passive Frequency setting resistor input; the resistor to V+A sets the master oscillator frequency, the pin is held about 1.1V below V+A, with a recommended 20k to 400k precision metal film resistor and under 10pF capacitance on the pin.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package MSOP-16
Category Clock And Timing
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Frequency Accuracy, V+=5V, PH=3, 500kHz≤fMASTER≤10MHz (25°C) ΔfMASTER -2.5 1 2.5 % V+ = 5V, PH = 3, 500kHz ≤ fMASTER ≤ 10MHz 2
Frequency Accuracy, V+=5V, 500kHz≤fMASTER≤10MHz (over temp) ΔfMASTER -3 2.5 3 % V+ = 5V, 500kHz ≤ fMASTER ≤ 10MHz, full temperature range 2
Frequency Accuracy, V+=5V, 100kHz≤fMASTER<500kHz ΔfMASTER -4.5 3 4.5 % V+ = 5V, 100kHz ≤ fMASTER < 500kHz 2
Frequency Accuracy, V+=5V, 10MHz≤fMASTER≤20MHz ΔfMASTER -3.5 2.7 3.5 % V+ = 5V, 10MHz ≤ fMASTER ≤ 20MHz 2
Frequency Accuracy, V+=2.7V, PH=3, 500kHz≤fMASTER≤10MHz (25°C) ΔfMASTER -2.5 0.5 2.5 % V+ = 2.7V, PH = 3, 500kHz ≤ fMASTER ≤ 10MHz 2
Frequency Accuracy, V+=2.7V, 500kHz≤fMASTER≤10MHz (over temp) ΔfMASTER -3 2 3 % V+ = 2.7V, 500kHz ≤ fMASTER ≤ 10MHz, full temperature range 2
Frequency Accuracy, V+=2.7V, 100kHz≤fMASTER<500kHz ΔfMASTER -4.5 2.5 4.5 % V+ = 2.7V, 100kHz ≤ fMASTER < 500kHz 2
Frequency Drift Over Temperature ΔfOUT/ΔT 0.004 %/°C RSET = 100k 2
Frequency Drift Over Supply, 4.5V to 5.5V ΔfOUT/ΔV+ 0.4 0.9 %/V V+ = 4.5V to 5.5V, RSET = 100k 2
Frequency Drift Over Supply, 2.7V to 3.6V ΔfOUT/ΔV+ 0.04 0.35 %/V V+ = 2.7V to 3.6V, RSET = 100k 2
RSET Range, 4.5V≤V+≤5.5V RSET 10 2000 kΩ 4.5V ≤ V+ ≤ 5.5V 3
RSET Range, 2.7V≤V+≤4.5V RSET 20 2000 kΩ 2.7V ≤ V+ ≤ 4.5V 3
Frequency Spread with SSFM Enabled 7 10 13 % RSET = 100k, MOD Pin = V+, GND or Open 3
Duty Cycle 45 50 55 % SSFM Disabled 3
Operating Supply Voltage Range V+A, V+D 2.7 5.5 V 3
Supply Current, SSFM fOUT/64, V+=5V IS 0.6 0.85 mA RSET = 2M, RL = ∞, PH = 8, MOD = V+, V+ = 5V 3
Supply Current, SSFM fOUT/64, V+=2.7V IS 0.55 0.8 mA RSET = 2M, RL = ∞, PH = 8, MOD = V+, V+ = 2.7V 3
Supply Current, SSFM fOUT/16, V+=5V IS 2.4 2.7 mA RSET = 20k, RL = ∞, PH = 3, MOD = GND, V+ = 5V 3
Supply Current, SSFM fOUT/16, V+=2.7V IS 1.55 1.8 mA RSET = 20k, RL = ∞, PH = 3, MOD = GND, V+ = 2.7V 3
Supply Current, SSFM off, V+=5V IS 0.4 0.65 mA RSET = 2M, RL = ∞, PH = 8, MOD = OUT1, V+ = 5V 3
Supply Current, SSFM off, V+=2.7V IS 0.37 0.6 mA RSET = 2M, RL = ∞, PH = 8, MOD = OUT1, V+ = 2.7V 3
Low Level MOD Input Voltage VIL_MOD 0.4 V 3
MOD Input Current, MOD=V+ IMOD 2 4 µA MOD Pin = V+, V+ = 5V 3
MOD Input Current, MOD=GND IMOD -4 -2 µA MOD Pin = GND, V+ = 5V 3
Low Level PHx Input Voltage VIL_PH 0.4 V PHx Refers to PH0, PH1 and PH2 3
Digital Input Current, PH0, PH1, PH2 IIN_PHX -1 1 µA 0V < VIN < V+ 3
High Level Output Voltage, V+=5V, 5mA load VOH 4.35 4.65 V V+ = 5V, 5mA Load to GND 3
High Level Output Voltage, V+=5V, no load VOH 4.92 V V+ = 5V, No Load 3
High Level Output Voltage, V+=2.7V, 3mA load VOH 2.1 2.4 V V+ = 2.7V, 3mA Load to GND 3
High Level Output Voltage, V+=2.7V, no load VOH 2.63 V V+ = 2.7V, No Load 3
Low Level Output Voltage, V+=5V, 5mA load VOL 0.25 0.55 V V+ = 5V, 5mA Load to V+ 3
Low Level Output Voltage, V+=5V, no load VOL 0.07 V V+ = 5V, No Load 3
Low Level Output Voltage, V+=2.7V, 3mA load VOL 0.25 0.55 V V+ = 2.7V, 3mA Load to V+ 3
Low Level Output Voltage, V+=2.7V, no load VOL 0.07 V V+ = 2.7V, No Load 3
Long-Term Stability of Output Frequency 300 ppm/√kHr 3
Output Rise Time, V+=5V tr 1.6 ns V+ = 5V 3
Output Rise Time, V+=2.7V tr 2.5 ns V+ = 2.7V 3
Output Fall Time, V+=5V tf 1.6 ns V+ = 5V 3
Output Fall Time, V+=2.7V tf 2 ns V+ = 2.7V 3
Supply Voltage (V+A) to GND V+A 6 V 2
Supply Voltage (V+D) to GND V+D 6 V 2
Junction Temperature TJ 150 °C 2
Storage Temperature Range TSTG -65 150 °C 2
Lead Temperature (Soldering, 10 sec) 300 °C Soldering, 10 sec 2
Operating Temperature Range (LTC6909I) -40 85 °C LTC6909I 2
Specified Temperature Range (LTC6909I) -40 85 °C LTC6909I 2
Junction-to-Ambient Thermal Resistance θJA 125 °C/W MS16 package 2

CAD (KiCad official)

  • Symbol: LTC6909IMS#PBF
  • Footprint: Package_SO:MSOP-16_3x4.039mm_P0.5mm
  • 3D model: MSOP-16 (KiCad packages3D, STEP)
  • 3D model files: ltc6909ims-pbf-etched.step / ltc6909ims-pbf-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ltc6909ims-pbf.step / ltc6909ims-pbf.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (22 pp, sha256 159f5d595fe8ca78, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF