main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers ltc6902ims-trpbf: viewers · Ray
ltc6902ims-trpbf-etched.glb Publish 0.1.0 · Ray
ltc6902ims-trpbf-etched.step ltc6902ims-trpbf: factory component page (tier=mfr) · Ray
ltc6902ims-trpbf-hero.glb ltc6902ims-trpbf: hero GLB from the etched model (keeps the MPN mark) · Ray
ltc6902ims-trpbf-hero.overlay.json Publish 0.1.0 · Ray
ltc6902ims-trpbf.glb Publish 0.1.0 · Ray
ltc6902ims-trpbf.kicad_mod Publish 0.1.0 · Ray
ltc6902ims-trpbf.kicad_sym Publish 0.1.0 · Ray
ltc6902ims-trpbf.lbr Publish 0.1.0 · Ray
ltc6902ims-trpbf.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 10 pins · Ray

LTC6902IMS#TRPBF

Analog Devices · Timers / Clock Oscillators · MSOP-10

LTC6902IMS#TRPBF from Analog Devices, in a MSOP-10. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 V+ power_in Positive supply pin, operating from 2.7V to 5.5V with absolute maximum supply of 6V to GND.
2 DIV input Programmable divider select: tie to GND for N=1, leave open for N=10, or tie to V+ for N=100, with logic high at V+ minus 0.4V minimum and logic low at 0.4V maximum.
3 PH input Multiphase mode select: tie to 0V for 2-phase, leave open for 3-phase, or tie to V+ for 4-phase, with logic high at V+ minus 0.4V minimum and logic low at 0.4V maximum.
4 OUT1 output CMOS clock output 1 with ON resistance typically less than 100Ω, suitable for driving general logic and switching regulator clock inputs.
5 OUT2 output CMOS clock output 2 with ON resistance typically less than 100Ω, suitable for driving general logic and switching regulator clock inputs.
6 OUT3 output CMOS clock output 3 with ON resistance typically less than 100Ω, suitable for driving general logic and switching regulator clock inputs.
7 OUT4 output CMOS clock output 4 with ON resistance typically less than 100Ω, suitable for driving general logic and switching regulator clock inputs.
8 GND power_in Ground reference pin for the device and the reference for all pin voltages.
9 MOD input Spread spectrum modulation control: a resistor RMOD to V+ sets the spreading percentage, and grounding this pin disables SSFM, which is the best method of disabling it.
10 SET input Oscillator frequency-setting pin: a resistor RSET connected from this pin to V+ sets the master oscillator frequency.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package MSOP-10
Category Clock and Timing
Pins 10

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Frequency Accuracy ∆fOUT -1.5 0.5 1.5 % V+ = 5V; 5kHz ≤ fOUT ≤ 10MHz 2
Frequency Accuracy ∆fOUT -2 2 % 1kHz ≤ fOUT ≤ 5kHz 2
Frequency Accuracy ∆fOUT -4 3 4 % 10MHz ≤ fOUT ≤ 20MHz 2
Frequency Accuracy (LTC6902I) ∆fOUT -2.5 2.5 % 5kHz < fOUT ≤ 10MHz, LTC6902I 2
RSET Frequency Setting Resistor Range RSET 20 400 kΩ ∆fOUT < 1.5%, V+ = 5V 2
Frequency Drift Over Temperature ∆fOUT/∆T -0.004 0.004 %/°C RSET = 63.2k 2
Frequency Drift Over Supply ∆fOUT/∆V 0.04 0.12 %/V V+ = 2.7V to 5V, RSET = 63.2k 2
Duty Cycle 49 50 51 % Pin 2 = V+ or Open (N = 100 or 10); Pin 3 = 0V (2-Phase, M = 1) 2
Duty Cycle 32.3 33.3 34.3 % Pin 2 = V+ or Open (N = 100 or 10); Pin 3 = Open (3-Phase, M = 3) 2
Duty Cycle 45 50 55 % Pin 2 = 0V (N = 1); Pin 3 = 0V (2-Phase, M = 1) 2
Supply Voltage (V+) Operating Range V+ 2.7 5.5 V 3
Power Supply Current IS 0.35 0.55 mA RSET = 400k, RL = ∞, Pin 2 = V+ (N = 100), fOUT = 5kHz; V+ = 5V 3
Power Supply Current IS 0.32 0.5 mA RSET = 400k, RL = ∞, Pin 2 = V+ (N = 100), fOUT = 5kHz; V+ = 2.7V 3
Power Supply Current IS 2.35 3.5 mA RSET = 20k, RL = ∞, Pin 2 = 0V (N = 1), fOUT = 10MHz; V+ = 5V 3
Power Supply Current IS 1.4 1.8 mA RSET = 20k, RL = ∞, Pin 2 = 0V (N = 1), fOUT = 10MHz; V+ = 2.7V 3
Power Supply Current IS 0.45 0.63 mA RSET = 400k, RL = ∞, Pin 2 = V+ (N = 100), RMOD = 800k; V+ = 5V 3
Power Supply Current IS 0.34 0.5 mA RSET = 400k, RL = ∞, Pin 2 = V+ (N = 100), RMOD = 800k; V+ = 2.7V 3
Power Supply Current IS 2.5 3.6 mA RSET = 20k, RL = ∞, Pin 2 = 0V (N = 1), RMOD = 40k; V+ = 5V 3
Power Supply Current IS 1.4 1.9 mA RSET = 20k, RL = ∞, Pin 2 = 0V (N = 1), RMOD = 40k; V+ = 2.7V 3
Low Level DIV Input Voltage VIL_DIV 0.4 V 3
Low Level PH Input Voltage VIL_PH 0.4 V 3
DIV Input Current IDIV 2 4 µA Pin 2 = V+, V+ = 5V 3
DIV Input Current IDIV -4 -2 µA Pin 2 = 0V, V+ = 5V 3
PH Input Current IPH 2 4 µA Pin 3 = V+, V+ = 5V 3
PH Input Current IPH -4 -2 µA Pin 3 = 0V, V+ = 5V 3
High Level Output Voltage VOH 4.75 4.9 V V+ = 5V, IOH = -1mA 3
High Level Output Voltage VOH 4.4 4.7 V V+ = 5V, IOH = -4mA 3
High Level Output Voltage VOH 2.35 2.6 V V+ = 2.7V, IOH = -1mA 3
High Level Output Voltage VOH 1.85 2.2 V V+ = 2.7V, IOH = -4mA 3
Low Level Output Voltage VOL 0.05 0.15 V V+ = 5V, IOL = 1mA 3
Low Level Output Voltage VOL 0.2 0.4 V V+ = 5V, IOL = 4mA 3
Low Level Output Voltage VOL 0.1 0.3 V V+ = 2.7V, IOL = 1mA 3
Low Level Output Voltage VOL 0.4 0.7 V V+ = 2.7V, IOL = 4mA 3
Spread Spectrum Frequency Modulation Spreading Percentage 35 40 45 % V+ = 5V, N = 10, RSET = 20k, RMOD = 10k 3
Spread Spectrum Frequency Modulation Spreading Percentage 7.5 10 12.5 % V+ = 5V, N = 10, RSET = 20k, RMOD = 40k 3
Supply Voltage (V+) to GND V+ -0.3 6 V Referred to GND 2
Operating Temperature Range (LTC6902I) -40 85 °C LTC6902I 2
Specified Temperature Range (LTC6902I) -40 85 °C LTC6902I 2
Storage Temperature Range -65 150 °C 2
Lead Temperature (Soldering) 300 °C Soldering, 10 sec 2
Maximum Junction Temperature TJMAX 150 °C 2
Thermal Resistance, Junction to Ambient θJA 250 °C/W 2
Rise Time tr 14 ns V+ = 5V; Pin 2 = V+ or Open (N = 100 or N = 10) 3
Rise Time tr 7 ns V+ = 5V; Pin 2 = 0V (N = 1) 3
Rise Time tr 19 ns V+ = 2.7V; Pin 2 = V+ or Open (N = 100 or N = 10) 3
Rise Time tr 11 ns V+ = 2.7V; Pin 2 = 0V (N = 1) 3
Fall Time tf 13 ns V+ = 5V; Pin 2 = V+ or Open (N = 100 or N = 10) 3
Fall Time tf 6 ns V+ = 5V; Pin 2 = 0V (N = 1) 3
Fall Time tf 19 ns V+ = 2.7V; Pin 2 = V+ or Open (N = 100 or N = 10) 3
Fall Time tf 10 ns V+ = 2.7V; Pin 2 = 0V (N = 1) 3

CAD (KiCad official)

  • Symbol: LTC6902IMS#TRPBF
  • Footprint: Package_SO:MSOP-10_3x3mm_P0.5mm
  • 3D model: MSOP-10 (KiCad packages3D, STEP)
  • 3D model files: ltc6902ims-trpbf-etched.step / ltc6902ims-trpbf-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ltc6902ims-trpbf.step / ltc6902ims-trpbf.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (16 pp, sha256 e4b39fe7ae1e50d9, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF