main
History Download
Ray Publish 0.1.0 e9e7227

LTC4415EDHC#PBF

Analog Devices · Switching Diodes · DFN-16(3x5)

LTC4415EDHC#PBF from Analog Devices, in a DFN-16(3x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IN1 power_in Diode 1 anode and positive supply for the LTC4415; bypass with a ceramic capacitor of at least 4.7µF, fused to pin 2, and may be grounded when unused.
2 IN1 power_in Diode 1 anode and positive supply for the LTC4415; bypass with a ceramic capacitor of at least 4.7µF, fused to pin 1, and may be grounded when unused.
3 EN1 input Enable input for Diode 1; a high signal greater than VENTH enables Diode 1, with VENTH typically 800mV.
4 CLIM1 passive Current limit adjust and monitor for Diode 1; a resistor to ground sets the limit (RCLIM allowed 125Ω to 1000Ω), a fixed 6A limit applies when shorted to ground, and the pin must not be left open.
5 CLIM2 passive Current limit adjust and monitor for Diode 2; a resistor to ground sets the limit (RCLIM allowed 125Ω to 1000Ω), a fixed 6A limit applies when shorted to ground, and the pin must not be left open.
6 EN2 input Enable input for Diode 2; a low signal less than VENTH enables Diode 2, with VENTH typically 800mV.
7 IN2 power_in Diode 2 anode and positive supply for the LTC4415; bypass with a ceramic capacitor of at least 4.7µF, fused to pin 8, and may be grounded when unused.
8 IN2 power_in Diode 2 anode and positive supply for the LTC4415; bypass with a ceramic capacitor of at least 4.7µF, fused to pin 7, and may be grounded when unused.
9 OUT2 power_out Diode 2 cathode and output; bypass with a ceramic capacitor of at least 4.7µF, fused to pin 10, and left open when unused.
10 OUT2 power_out Diode 2 cathode and output; bypass with a ceramic capacitor of at least 4.7µF, fused to pin 9, and left open when unused.
11 STAT2 output Open-drain status output that pulls down during Diode 2 forward conduction; may be left open or grounded when unused.
12 WARN2 output Open-drain overcurrent and thermal warning output for Diode 2 that pulls low when its current exceeds the current limit or die temperature nears thermal shutdown (160°C typical threshold).
13 WARN1 output Open-drain overcurrent and thermal warning output for Diode 1 that pulls low when its current exceeds the current limit or die temperature nears thermal shutdown (160°C typical threshold).
14 STAT1 output Open-drain status output that pulls down during Diode 1 forward conduction; may be left open or grounded when unused.
15 OUT1 power_out Diode 1 cathode and output; bypass with a ceramic capacitor of at least 4.7µF, fused to pin 16, and left open when unused.
16 OUT1 power_out Diode 1 cathode and output; bypass with a ceramic capacitor of at least 4.7µF, fused to pin 15, and left open when unused.
17 GND power_in Exposed pad is device ground and must be soldered to PCB ground for both electrical connection and thermal conductivity.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package DFN-16(3x5)
Category Diodes
Pins 17

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating Supply Range VIN1, VOUT1, VIN2, VOUT2 1.7 5.5 V At Least One Input/Output Must Be in This Range 3
Undervoltage Lockout VINx Rising VUVLO 1.63 1.7 V VINx Rising 3
Quiescent Current In Forward Regulation IQF 44 80 µA VIN1 = VEN1 = VEN2 = 3.6V, IOUT1 = -1mA, VIN2 = VOUT2 = 0V, Measured Through GND Pin 3
Quiescent Current In Shutdown IQOFF 13 28 µA VIN1 = VIN2 = VEN2 = 3.6V, VEN1 = 0V, VOUT1 = VOUT2 = 0V, Measured Through GND Pin 3
Reverse Turn-Off Current: OUT1 OUT2 IQR(OUT) 18 40 µA VIN1 = 3.6V, VOUT1 = 3.7V, VIN2 = 3.5V, VOUT2 = 3.6V (VOUT1 > VOUT2) 3
Reverse Turn-Off Current: OUT1 OUT2 (second row) IQR(OUT) 5 11 µA 3
INx Pin Current In Reverse Turn-Off IQR(IN) 4 10 µA VOUT1 = VOUT2 = 5.5V 3
INx Pin Leakage Current ILEAK(IN) -1 1 µA VIN1 = VIN2 = 0V, VOUT1 = VOUT2 = 5.5V 3
Forward Regulation Voltage (VINx, VOUTx) VFR 5 15 25 mV IOUTx = -1mA 3
Reverse Turn-Off Voltage (VINx, VOUTx) VRTO -50 -30 -10 mV 3
Forward Dynamic Resistance in Regulation RFR 18 30 mΩ IOUTx = -100mA to -300mA 3
On-Resistance in Constant Resistance Mode RON 50 70 mΩ IOUTx = -1A 3
Current Monitor Ratio ICLIMx /IOUTx 0.9 1 1.1 mA/A When IOUTx = -4A 3
Current Monitor Ratio ICLIMx /IOUTx 0.8 1 1.2 mA/A When IOUTx = -2A 3
Current Limit Adjustability ILIM(ADJ) 0.5 4 A 3
Accuracy of Adjustable Current Limit Threshold -8 8 % VOUTx = VINx, 0.5V, Current Limit = 4A 3
Accuracy of Adjustable Current Limit Threshold -15 15 % VOUTx = VINx, 0.5V, Current Limit = 2A 3
Internal Current Limit ILIM(INT) 4 6 9 A RCLIMx = 0Ω, VOUTx = 0V 3
Open-Drain Output Low Voltage VOL 0.05 0.4 V Current Into Open-Drain Output = 3mA 3
Open-Drain Output High Leakage Current 0 1 µA Open-Drain Output Voltage = 5.5V 3
Enable Pin Current When Pulled High 0 1 µA VEN1 = VEN2 = 3.6V 4
EN1 Rising and EN2 Falling Thresholds VENTH 760 800 840 mV 4
PowerPath Turn-On Time Before Enable VOUT1 = 1.5V Diode 1 tON 10 µs Before Enable VOUT1 = 1.5V, Diode 1 3
PowerPath Turn-On Time Before Enable VOUT2 = 1.5V Diode 2 tON 23 µs Before Enable VOUT2 = 1.5V, Diode 2 3
PowerPath Turn-On Time Before Enable VOUTx = 0V tON 250 µs Before Enable VOUTx = 0V 3
PowerPath Turn-On from Shutdown Both Diodes Disabled VOUTx = 1.5V tON(SD) 70 µs Both Diodes Disabled and VOUTx = 1.5V Before Enable 3
PowerPath Turn-On from Shutdown Both Diodes Disabled VOUTx = 0V tON(SD) 320 µs Both Diodes Disabled and VOUTx = 0V Before Enable 3
PowerPath Switchover Time tSWITCH 9 µs VINx ↑ (2.6V to 4.6V) to VOUTx Starts Rising, Both Diodes Enabled, OUT1 and OUT2 Tied Together 3
PowerPath Turn-Off Time tOFF 2 µs Disable to IIN Falling from 100mA to 1mA 3
Soft-Start Duration tSS 2 ms VOUTx = 0V 3
Thermal Warning Threshold TWARN 130 °C Rising Temperature 3
Thermal Warning Hysteresis TWARN 15 °C 3
Thermal Shutdown Threshold TSD 160 °C Rising Temperature 3
Thermal Shutdown Hysteresis TSD 20 °C 3
STAT Turn-On Time EN1 Rising to STAT1 Pull-Down tSTAT(ON) 5 µs EN1 Rising to STAT1 Pull-Down 3
STAT Turn-On Time EN2 Falling to STAT2 Pull-Down tSTAT(ON) 18 µs EN2 Falling to STAT2 Pull-Down 3
STAT Turn-Off Time tSTAT(OFF) 2 µs Disable to STAT Pull-Up 4
WARN Turn-On Time tWARN(ON) 500 µs Current Limit to WARN Pull-Down 4
WARN Turn-Off Time tWARN(OFF) 5 µs Out of Current Limit to WARN Pull-Up 4
EN1 and EN2 Hysteresis VENHYST 55 mV 4
Absolute Maximum Voltage IN1 IN2 OUT1 OUT2 CLIM1 CLIM2 STAT1 STAT2 WARN1 WARN2 -0.3 6 V IN1, IN2, OUT1, OUT2, CLIM1, CLIM2, STAT1, STAT2, WARN1, WARN2 Voltage 2
Operating Junction Temperature Range TJ -40 125 °C Notes 3, 4 2
Storage Temperature Range TSTG -65 150 °C 2
Current Limit Resistor Allowed Range RCLIM 125 1000 Ω Unless CLIM1/CLIM2 pins are shorted to GND 9
Maximum Junction Temperature TJMAX 125 °C DHC package 2
Thermal Resistance Junction to Ambient θJA 43 °C/W DHC package, correctly soldered to 2500mm2 double-sided 1oz copper board 12

CAD (KiCad official)

  • Symbol: LTC4415EDHC#PBF
  • Footprint: Package_DFN_QFN:DFN-16-1EP_3x5mm_P0.5mm_EP1.66x4.4mm
  • 3D model: DFN-16(3x5) (KiCad packages3D, STEP)
  • 3D model files: ltc4415edhc-etched.step / ltc4415edhc-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ltc4415edhc.step / ltc4415edhc.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (20 pp, sha256 e35970b1d556a4ba, retrieved 2026-11-19)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF