main
Ray
Publish 0.1.0
e8fd29e
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210
{
"slug": "ltc4064emse-pbf",
"version": "0.1.0",
"type": "component",
"description": "Analog Devices Battery Management ICs, MSOP-10-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"power supply chip",
"ltc4064emse#pbf",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"ltc4064emse-pbf.kicad_sym",
"ltc4064emse-pbf.kicad_mod",
"ltc4064emse-pbf.glb",
"ltc4064emse-pbf.step",
"ltc4064emse-pbf.lbr",
"docs/hero.png",
"docs/ltc4064emse-pbf-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"ltc4064emse-pbf-hero.glb",
"ltc4064emse-pbf-hero.overlay.json",
"ltc4064emse-pbf-etched.glb"
],
"component": {
"mpn": "LTC4064EMSE#PBF",
"manufacturer": "Analog Devices",
"package": "MSOP-10-EP",
"pin_count": 11,
"category": "Power Supply Chip",
"subcategory": "Battery Management ICs",
"datasheet": "https://www.analog.com/media/en/technical-documentation/data-sheets/4064fs.pdf",
"parts": {
"symbol": "ltc4064emse-pbf.kicad_sym",
"footprint": "ltc4064emse-pbf.kicad_mod",
"model_3d": "ltc4064emse-pbf-hero.glb",
"model_3d_plain": "ltc4064emse-pbf-etched.glb",
"model_3d_step": "ltc4064emse-pbf-etched.step",
"model_3d_step_plain": "ltc4064emse-pbf.step",
"lbr": "ltc4064emse-pbf.lbr"
},
"distributor_links": {
"lcsc": "C687207",
"digikey": "LTC4064EMSE#PBF-ND",
"mouser": "584-LTC4064EMSE#PBF"
},
"distributor_check": {
"checked_at": "2026-10-28T15:20:03Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "LTC4064EMSE#PBF-ND",
"status": "found"
},
"mouser": {
"pn": "584-LTC4064EMSE#PBF",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "CHRG",
"type": "output",
"description": "Open-drain charge status output that is pulled low while charging, latches to a 30µA pull-down at C/10, and goes high impedance when the timer runs out or the input supply is removed."
},
{
"number": "2",
"name": "VCC",
"type": "power_in",
"description": "Positive input supply that operates from 4.25V to 6.5V and must be bypassed with at least a 4.7µF ceramic capacitor to ground."
},
{
"number": "3",
"name": "FAULT",
"type": "output",
"description": "Open-drain fault status output that latches low when trickle charge times out on a low battery and pulls low, unlatched, while the NTC indicates an out-of-range temperature."
},
{
"number": "4",
"name": "TIMER",
"type": "passive",
"description": "Timer capacitor pin where the charge time is Time (Hours) = (CTIMER × 3 hr)/(0.1µF); shorting this pin to ground disables the internal timer."
},
{
"number": "5",
"name": "GND",
"type": "power_in",
"description": "Ground pin, one of two ground connections, which must be connected to the PC board ground plane."
},
{
"number": "6",
"name": "NTC",
"type": "input",
"description": "NTC thermistor input that suspends charging when the voltage falls below (0.5)•(VCC) at hot temperatures or rises above (0.875)•(VCC) at cold; grounding this pin disables the NTC feature."
},
{
"number": "7",
"name": "PROG",
"type": "passive",
"description": "Charge current program pin, where RPROG to ground sets constant-current mode with the pin servoed to 1.5V, and IBAT = (VPROG/RPROG) • 1000 gives the charge current monitor."
},
{
"number": "8",
"name": "SHDN",
"type": "input",
"description": "Shutdown input that puts the charger into standby with BAT drain current below 3µA and supply current below 25µA when pulled to ground, and must be pulled up to VCC for normal operation."
},
{
"number": "9",
"name": "BAT",
"type": "power_out",
"description": "Charge current output to the battery that requires a bypass capacitor of at least 1µF with a 1Ω series resistor to keep the loop stable when no battery is present, and sets the final float voltage of 4V through an internal divider."
},
{
"number": "10",
"name": "ACPR",
"type": "output",
"description": "Open-drain power supply status output that pulls low when VCC is above the undervoltage lockout threshold and at least 35mV above VBAT, and is high impedance otherwise."
},
{
"number": "11",
"name": "GND",
"type": "power_in",
"description": "Exposed backside pad that is ground and must be soldered to the PC board, since failure to solder it results in a thermal resistance much higher than 40°C/W."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [],
"pages_sent": 10,
"cost_usd": 0.0179,
"at": "2026-10-28T15:19:53"
},
"datasheet": {
"url": "https://www.analog.com/media/en/technical-documentation/data-sheets/4064fs.pdf",
"pages": 16,
"sha256": "f296ef91ee5a46c4",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 11,
"described": 11,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "ltc4064emse-pbf.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
4.9,
3.0,
0.95
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "18605eed706df7bb9674107abe7aa36e0ba163a09c21a2cee6c75cfa291b7937",
"checked": "2026-10-28",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "ltc4064emse-pbf-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
4.9,
3.0,
0.95
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "e6b5667324d334eaf902c89c4f88dd7a51fec7f7f974827bc0a38f61df537a70",
"checked": "2026-10-28",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}