LTC2912ITS8-2#TRPBF

{
  "slug": "ltc2912its8-2-trpbf",
  "version": "0.1.0",
  "type": "component",
  "description": "Analog Devices Supervisor And Reset ICs, TSOT-23-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "ltc2912its8-2#trpbf",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ltc2912its8-2-trpbf.kicad_sym",
    "ltc2912its8-2-trpbf.kicad_mod",
    "ltc2912its8-2-trpbf.glb",
    "ltc2912its8-2-trpbf.step",
    "ltc2912its8-2-trpbf.lbr",
    "docs/hero.png",
    "docs/ltc2912its8-2-trpbf-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ltc2912its8-2-trpbf-hero.glb",
    "ltc2912its8-2-trpbf-hero.overlay.json",
    "ltc2912its8-2-trpbf-etched.glb"
  ],
  "component": {
    "mpn": "LTC2912ITS8-2#TRPBF",
    "manufacturer": "Analog Devices",
    "package": "TSOT-23-8",
    "pin_count": 8,
    "category": "Power Management (PMIC)",
    "subcategory": "Supervisor And Reset ICs",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588917883221258240",
    "parts": {
      "symbol": "ltc2912its8-2-trpbf.kicad_sym",
      "footprint": "ltc2912its8-2-trpbf.kicad_mod",
      "model_3d": "ltc2912its8-2-trpbf-hero.glb",
      "model_3d_plain": "ltc2912its8-2-trpbf-etched.glb",
      "model_3d_step": "ltc2912its8-2-trpbf-etched.step",
      "model_3d_step_plain": "ltc2912its8-2-trpbf.step",
      "lbr": "ltc2912its8-2-trpbf.lbr"
    },
    "distributor_links": {
      "lcsc": "C683305",
      "digikey": "505-LTC2912ITS8-2#TRPBFTR-ND",
      "mouser": "584-C2912ITS8-2TRPBF"
    },
    "distributor_check": {
      "checked_at": "2026-10-21T02:15:26Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "505-LTC2912ITS8-2#TRPBFTR-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "584-C2912ITS8-2TRPBF",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "DIS",
        "type": "input",
        "description": "Output disable input that, when pulled high, keeps the OV and UV pins from asserting except during a UVLO condition, and it has a weak 2µA internal pull-down to GND so it may be left open."
      },
      {
        "number": "2",
        "name": "UV",
        "type": "output",
        "description": "Undervoltage logic output that asserts low when the VH input is below its 0.5V threshold and is held low for the programmed delay after VH is valid, with a weak pull-up to VCC that may be pulled above VCC by an external pull-up."
      },
      {
        "number": "3",
        "name": "OV",
        "type": "output",
        "description": "Overvoltage logic output on the LTC2912-2 that asserts low when the VL input is above threshold and is held low for the programmed delay after VL is valid, with a weak pull-up to VCC that may be pulled above VCC by an external pull-up."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "Device ground; all voltages are referenced to this pin."
      },
      {
        "number": "5",
        "name": "TMR",
        "type": "passive",
        "description": "Reset delay timer pin, where an external capacitor of at least 10pF to GND sets a reset delay of 9ms/nF, or tying it to VCC bypasses the timer."
      },
      {
        "number": "6",
        "name": "VL",
        "type": "input",
        "description": "Voltage Low input that triggers an overvoltage condition when its voltage is above 0.5V, and should be tied to GND if unused."
      },
      {
        "number": "7",
        "name": "VH",
        "type": "input",
        "description": "Voltage High input that triggers an undervoltage condition when its voltage is below 0.5V, and should be tied to VCC if unused."
      },
      {
        "number": "8",
        "name": "VCC",
        "type": "power_in",
        "description": "Supply pin that operates as a direct supply up to 6V and as a shunt regulator above 6V, where a series resistor must limit input current to no more than 10mA, and it should be bypassed to GND with 0.1µF or greater."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pinout taken from the LTC2912-2 TS8 (TSOT-23) pin diagram on page 2, which matches the ordering tabl; The datasheet does not give a separate pin-type classification for UV and OV beyond their open-drain"
        ],
        "pages_sent": 14,
        "cost_usd": 0.0836,
        "at": "2026-10-21T02:10:18"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588917883221258240",
        "pages": 14,
        "sha256": "b00d264ccc4575ba",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ltc2912its8-2-trpbf.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          0.95
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "dc644a91883054d8f75e38542e63c2050dc8f2e8b7f12e1c57dcd93245fbd473",
        "checked": "2026-10-21",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ltc2912its8-2-trpbf-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          0.95
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "88ee71ba37d13b78a1d8233c2b4c8d549dcb007d51041d070b8cf78b34e3fcbd",
        "checked": "2026-10-21",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}